| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic 8 string fender question for anyone ??
Reply to topic
Author Topic:  8 string fender question for anyone ??
james sluder


From:
Tennessee, USA
Post  Posted 10 Feb 2006 5:08 pm    
Reply with quote

I have a fender 8 string 4 black iron floor pedals..just wondered if anyone can tell me the year it was made. & is it a 400???
View user's profile Send private message Send e-mail Visit poster's website
Ben Elder

 

From:
La Crescenta, California, USA
Post  Posted 10 Feb 2006 5:36 pm    
Reply with quote

The more experienced Forumites can jump in, but for the moment, my understanding is that the black pedals are more like '60s while the flat chrome-plated ones are '50s/early-'60s. The Fender "transition" logo decal is mid- '60s where as the thinner "spaghetti" logo is earlier (mostly). A pickup that looks like a Jaguar pu (chrome sawtooth housing) is mid-60s-ish, whereas one that looks like a Jazzmaster's pu (wide, rectangular) is 50s-early '60s. If the volume and tone pots are original, the last three digits tell you the last digit of the year of manufacture, then the week of the year. Example: a code ending in -652 would be either December 25-31 of 1956 or December 25-31, 1966 (assuming the pot mfr. didn't take the holidays off in this silly example). Other clues should tell you whether a year of 1956 or 1966 (or xxx6) makes more sense. Many Fender instruments from the early days until some time in the '60s had assemblers' names or initials and date codes in cavities and pockets--either on the wood or a piece of masking tape. "TG 6-53" might be found somewhere on a June 1953 Tele put together by Tadeo Gomez (a legend in Fender factory lore).

400 = 8-string single neck
800 = 10-string single neck
1000 = 8-string double neck
2000 = 10-string double neck

Or post a photo and the veterans like Jody Carver can really tell you some stories.

[This message was edited by Ben Elder on 10 February 2006 at 05:38 PM.]

[This message was edited by Ben Elder on 16 February 2006 at 11:07 PM.]

[This message was edited by Ben Elder on 16 February 2006 at 11:07 PM.]

View user's profile Send private message Send e-mail
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 10 Feb 2006 5:47 pm    
Reply with quote

8 strings and 4 pedals equals a 400, that was the "standard" configuration. The black cast-aluminum pedals were used on everything from mid '64 until they stopped making pedal steels, which I believe was early in '76.
View user's profile Send private message Send e-mail
james sluder


From:
Tennessee, USA
Post  Posted 10 Feb 2006 5:47 pm    
Reply with quote

Thanks..that's what i neded to know.
View user's profile Send private message Send e-mail Visit poster's website
Steve Zinno

 

From:
Spring City, Pennsylvania, USA
Post  Posted 10 Feb 2006 6:16 pm    
Reply with quote

James, there's also a good chance that if you remove the changer plate underneath the guitar, you may find a date written on the opposite side (mine was).

------------------
steve z.
View user's profile Send private message Send e-mail
Jim Sliff


From:
Lawndale California, USA
Post  Posted 10 Feb 2006 10:24 pm    
Reply with quote

Actually, I'm relatively sure it was late-'63 when the switch was made to black pedals and jaguar-style pickup. Transitional models are sunburst, but with chrome pedals and the flat jazzmaster-style pickup, some with the roller bridge that was a field addition earlier.

Best way to get an estimated date is to check the pot codes - but they can be off by a year sometimes. Also, the date is sometimes written in under the tuner pan.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron