| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic B&C Pedals
Reply to topic
Author Topic:  B&C Pedals
Gary Arnold


From:
Panhandle of Florida, USA
Post  Posted 6 Jul 2019 6:16 pm    
Reply with quote

Is there a way to get the B&C pedal sound with out using the C pedal or a knee raising the 4th string. I use the B&C pedals but you never know when you might need an extra lick. Thanks, gka
View user's profile Send private message Send e-mail
Dave Meis


From:
Olympic Peninsula, Washington, USA
Post  Posted 6 Jul 2019 11:01 pm    
Reply with quote

When I have A+B down, I reach over with my right foot to hit C. Takes some practice to get back on the volume pedal, but it works really well for me... if I just want the F#, I raise the E and slant the bar a half step.
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post  Posted 7 Jul 2019 4:09 am    
Reply with quote

Dave Meis wrote:
When I have A+B down, I reach over with my right foot to hit C.


Buddy does exactly that in the solo on this clip...

https://youtu.be/qnEMOQTh27s
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 7 Jul 2019 8:15 am    
Reply with quote

Not sure if this applies, but if you already have string 4 raised with a knee, and you have the A pedal on string 5, you can get the BC sound by sliding up 2 frets and releasing the knee lever. Works on strings 6-5-4, but you can get the minor-to-major sound with this move on strings 5-4-3 also.
View user's profile Send private message Send e-mail
Jack Goodson

 

From:
new brockton,alabama (deceased)
Post  Posted 7 Jul 2019 10:05 am     1/2 stop
Reply with quote

gary, i remember an old buddy of mine had a 1/2 stop on his lkl that from an e to f and then raised both strings to an f sharp, i think bobbee seymore set it up for him....thanks jack
View user's profile Send private message
Sonny Jenkins


From:
Texas Masonic Retirement Center,,,Arlington Tx
Post  Posted 7 Jul 2019 11:05 am    
Reply with quote

Jeffery Harbour does not have a C pedal,,,I think he lowers or raises G#s,,,very effective substitute from what I've heard. I think he posted in a pretty lengthy thread a while back,,,explained it,,,got flamed,,,
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 7 Jul 2019 11:13 am    
Reply with quote

Sonny Jenkins wrote:
Jeffery Harbour does not have a C pedal

Nor does Russ Pahl, and he seems to have done okay for himself without it.
View user's profile Send private message Send e-mail
Gary Arnold


From:
Panhandle of Florida, USA
Post  Posted 7 Jul 2019 11:57 am    
Reply with quote

I don't want to get rid of my C pedal, just want to add to my playing. Thanks for the post's guys.
View user's profile Send private message Send e-mail
Tucker Jackson

 

From:
Portland, Oregon, USA
Post  Posted 7 Jul 2019 12:01 pm     Re: B&C Pedals
Reply with quote

Gary Arnold wrote:
Is there a way to get the B&C pedal sound with out using the C pedal or a knee raising the 4th string. I use the B&C pedals but you never know when you might need an extra lick. Thanks, gka


If you're on strings 4 and 5, you can slide up two frets instead of hitting the C pedal.
.
View user's profile Send private message Send e-mail
Gary Arnold


From:
Panhandle of Florida, USA
Post  Posted 8 Jul 2019 8:47 pm    
Reply with quote

TTT, Very Happy Very Happy Very Happy Very Happy Very Happy Very Happy Very Happy
View user's profile Send private message Send e-mail
Bengt Erlandsen

 

From:
Brekstad, NORWAY
Post  Posted 8 Jul 2019 10:47 pm    
Reply with quote

Tucker Jackson wrote:
Quote:
If you're on strings 4 and 5, you can slide up two frets instead of hitting the C pedal


while strings 4 and 5 are ringing, add string 1 or 7(with a halfstep raise!!!) and slide those 3 ringing strings back two frets, release raise on string 1 or 7 and then lower string 4 a semitone. IIm V type sound.

B.Erlandsen
View user's profile Send private message
Ian Rae


From:
Redditch, England
Post  Posted 9 Jul 2019 3:43 am    
Reply with quote

The reason the C pedal gets questioned so regularly is historical.

My first guitar was pull-release, which is a good way to begin. You don’t have all the modern changes so you have to get to grips with the basics that the early players had. Any given string could be raised or lowered but not both.

The primary purpose of the C pedal was to effectively lower strings 3 & 6 to F#, by engaging it and simultaneously sliding back two frets so that 4 & 5 stayed at the same pitch (see p.30 of Winnie Winston’s book). Nowadays players who use that change have it on a lever, at least on string 6.

Secondly, in combination with the B pedal it gives harmonised scales on strings 3&4 or 4&6 in the same way that we use A&B on 5&6 or 6&10. That can now be done with that other new invention, the F lever.

So, both the original functions of the C pedal have been overtaken by technology. However, if you experiment with the old-fashioned voicings you will find them satisfying. I’m certain it’s because in each case the string tensions are greater.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron