| Author |
Topic: Trade 2 Adj. legs |
Ed Javner
From:
Mt. View Arkansas, USA
|
Posted 5 Jun 2019 7:07 am |
|
I have two adjustable legs like new, that I will trade for two non adjustable, If anyone is interested. I need 27"-28"x 1" length.
 |
|
|
 |
Ed Javner
From:
Mt. View Arkansas, USA
|
Posted 12 Jun 2019 12:41 pm
|
|
| Bump one time |
|
|
|
Bill A. Moore
From:
Silver City, New Mexico, USA
|
Posted 12 Jun 2019 2:49 pm
|
|
Ed, I guess you know you may disassemble the legs, and cut a dowel the proper length, install it, and reassemble.
You will now have the length you need! |
|
|
|
David Mitchell
From:
Tyler, Texas
|
Posted 12 Jun 2019 3:07 pm
|
|
| What Bill said but if you would rather have the ultra light weight legs like what comes on a Carter Starter I think I have a couple I'll trade you. Send me a PM if interested. |
|
|
|
Ed Javner
From:
Mt. View Arkansas, USA
|
Posted 12 Jun 2019 4:09 pm
|
|
| I need a couple of 1"X 26" legs. Chrome. I think the Starters were aluminum. The two that I need are for the pedal board. |
|
|
|
Ed Javner
From:
Mt. View Arkansas, USA
|
Posted 12 Jun 2019 4:29 pm
|
|
The two showing are off the pedal board and have two small holes at the bottom to bolt the pedal board to. I need a 27" (sorry, not a 26") I want to do away with those wing nuts.
I made some slid locks on one of my other guitars and that work well. |
|
|
|
David Mitchell
From:
Tyler, Texas
|
Posted 12 Jun 2019 6:59 pm
|
|
| That's right. They were aluminium. I regret I can't help you with that. |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 13 Jun 2019 4:28 pm
|
|
David, I have Emmons student model guitar legs but they are only 25â€. If you can locate two chrome mic stands you could cut the large tube to length and drive threaded lugs into one end and crutch tips on the other end. I have the threaded lugs. You put a couple of washers and a 1/2†carriage nut on the lug to protect threads and simply drive it into the tube with a hammer.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
