| Author |
Topic: Tuning Knee Lever ? |
Gary Hoetker
From:
California, USA
|
Posted 21 May 2019 8:21 pm |
|
For S10 Pull-Release.
1. I have a hex tuning wrench for the pedals but it doesn't seem to work on the circular nylon pegs. What else can I use ?
2.Need to tune my 4th string (E) to +F on RKL. Turn peg clockwise or counter clockwise? Anything I should watch for underneath when I turn the peg?
Thank you for your time and help. Very much appreciate it. |
|
|
 |
Charlie Hansen
From:
Halifax, NS Canada and Various Southern Towns.
|
Posted 22 May 2019 8:04 am
|
|
I'd say if the nylon "pegs" are round that they're worn out and need to be replaced. There available in several places.
_________________
I don't know much but what I know I know very well.
Carter S-10 3X5, Peavey Nashville 112, plus Regal dobro and too many other instruments to mention.
Bluegrass Island CFCY FM 95.1 Charlottetown, PE, Canada, on the web at cfcy.fm.
A Touch Of Texas CIOE FM 97.5 Sackville, NS, Canada,
on the web at cioe975.ca. |
|
|
|
Bill Ford
From:
Graniteville SC Aiken
|
Posted 22 May 2019 10:14 am
|
|
You may need to go underneath to tune levers that lower.. What brand S10? Pictures of changer, and KL linkage would be helpful.
BF
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!! |
|
|
|
Gary Hoetker
From:
California, USA
|
Posted 22 May 2019 8:43 pm Reply for Bill Ford Re My KL Tuning ?
|
|
May I send the pictures
to your e-mail address ??
Gary Hoetker |
|
|
|
Bill Ford
From:
Graniteville SC Aiken
|
Posted 23 May 2019 3:56 am
|
|
Gary, it will be better if you post them here so there may be someone that has had the same problem, and found a fix.
Click on the "upload pictures" button.
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!! |
|
|
|
Bill Ford
From:
Graniteville SC Aiken
|
Posted 23 May 2019 9:57 am
|
|
Gary, The bottom nylon takes a 3/16" hex, the top looks like a 1/4", if
you have a set of nutdrivers, try the 3/16" on the bottom.
As you know pedals down (engaged) tune keys, pedals up, tune screws, I will post the
picture for you. Someone please correct me if I'm wrong...it's been a while siece I've owened a pull/release.
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!! |
|
|
|
