| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Fitting a tone bar to your hand size
Reply to topic
Author Topic:  Fitting a tone bar to your hand size
Andy Henriksen

 

From:
Michigan, USA
Post  Posted 22 Apr 2019 5:08 am    
Reply with quote

Hi, I've been working through PF's foundations course, and in one of the lessons, he talks about bar size, and makes two points, that I'd like to hear other opinions on.

1. He claims that 7/8" is the perfect diameter for PSG. Anything smaller and tone suffers. Anything larger, and its too hard to play accurately.

2. He endorses picking a bar size such that when your index finger is in the correct spot, the butt end should be against the hand near the base of the thumb (no gap), so that it remains firmly in your hand for better control. He says that choosing a "12-string bar" over a "10-string bar" is all about hand size, and not the guitar you play. He uses a 12-string bar due to having larger hands.

I have been using a 15/16" x 3.25" since I started on PSG, and after looking closely, I have about a 1/2" gap between the butt end of the bar and my hand. So, I'm contemplating buying a skinnier, longer bar. That said, I come from a lap steel background, where smaller bars are generally the norm.

I know it all comes down to "experiment and see what you like best," but I'd be curious to hear what others say about these two points.
View user's profile Send private message Send e-mail
Mathew Peluso

 

From:
Portland, Oregon, USA
Post  Posted 22 Apr 2019 7:13 am    
Reply with quote

Hi, Andy. I'm enrolled in PFM as well. I took his advice and switched from a 15/16" to a 7/8" bar. I then realized the gap between my hand and the end of the bar. So I bought a 12-string 7/8" bar and it's perfect. I feel like I have that much more control and my intonation improved quite a bit. I don't have particularly large hands but this is apparently what works best for me. I'd give the 12-string 7/8" bar a shot.
View user's profile Send private message
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 22 Apr 2019 7:21 am    
Reply with quote

I went from a 7/8" bar to a 15/16" bar and I don't have large hands, I just liked the feel of the larger bar.
Paul Franklin isn't the final authority, it's up to the individual. Very Happy
Erv
View user's profile Send private message Send e-mail
Bill Moore


From:
Manchester, Michigan
Post  Posted 22 Apr 2019 7:33 am    
Reply with quote

Andy, before you buy another bar, you might try to adjust your hand position to fit your current bar. If your hand is kind of flat when in your normal picking position, maybe you only need to move to a position where the first knuckle is pointed up more. When you do that the distance from your fingertip to the thumb base is shorter. Something to think about, anyway.

By the way, I have a couple of 7/8" by 3.5" bars if you want to try one out.
View user's profile Send private message Send e-mail
Marc Jenkins


From:
Victoria, British Columbia, Canada
Post  Posted 22 Apr 2019 8:54 am    
Reply with quote

I just bought a 12 string bar, and am blown away by the increase in bar control. Do it!!
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 22 Apr 2019 9:59 am    
Reply with quote

I bought a 12" bar when I bought my 12 string Mullen. It's 7/8" x 3-1/2" (Jim Burden Bullet Bar). I also have a 7/8" x 3-3/8" 10 string bar (BJS) and a 1" x 3-3/8" 10 string bar.

I find I use my BJS the most, even on 12 strings. Easiest to move around for me. I love the 1" bar, gets nicer tone because of the weight (I guess), but a little harder to move quickly. The 12 string bar also feels great in my hand, and will use it too. I use all 3 as the mood strikes me.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting.
View user's profile Send private message Send e-mail
Dennis Montgomery


From:
Western Washington
Post  Posted 22 Apr 2019 12:28 pm     Re: Fitting a tone bar to your hand size
Reply with quote

Andy Henriksen wrote:
Hi, I've been working through PF's foundations course, and in one of the lessons, he talks about bar size, and makes two points, that I'd like to hear other opinions on.


After going through the PF Foundations of E9, I took his recommendation and bought what he called a 'Stevens Bar' to go along with my 7/8" x 3 3/8". I find it mostly impossible to lift the 7/8" straight up, but the Stevens is obviously easy, so I like to use them for different things...

https://www.steelguitarshopper.com/JP-SP1/
_________________
Hear my latest album, "Celestial" featuring a combination of Mullen SD12 and Synthesizers:
https://www.youtube.com/watch?v=mhh6b_xXTx4&list=PLfXm8aXRTFz0x-Sxso0NWw493qAouK

Hear my album, "Armistice" featuring Fender 400 on every song:
https://www.youtube.com/playlist?list=PLfXm8aXRTFz2Pz_GXhvmjne7lPEtsplyW

Hear my Pedal Steel Only playlist featuring Mullen G2 SD12 on covers like Candyman, Wild Horses, Across the Universe & more...
https://www.youtube.com/playlist?list=PLfXm8aXRTFz2f0JOyiXpZyzNrvnJObliA
View user's profile Send private message Send e-mail Visit poster's website
Charley Bond


From:
Inola, OK, USA
Post  Posted 22 Apr 2019 3:44 pm     Tone Bar...
Reply with quote

My machinist Friend built me a 1 1/4 Diameter Tone Bar, with a 5'8" diameter counterbore. The Bar was great & I wish I could find it .. I sold it on ebay with several other bars... when I QUIT about 10-12 years ago. The 5/8" diameter counter bore took the weight away & the large Diameter Bar played great. I think it was about 3 1/4 inch long, with a bi g radius on the corner...(nose)[/quote]
_________________
Steel Guitar players are members of a Special Family
View user's profile Send private message Send e-mail
Gary Peaslee


From:
Hideaway, TX USA
Post  Posted 22 Apr 2019 7:44 pm    
Reply with quote

I was fortunate to be able to talk to Paul about this topic at the Texas show. He explained that anchoring the back end of the bar prevents it from wavering when moving up and down the neck. This has absolutely been true for me since going to a longer bar. I feel like it is much easier to keep the bar in a perpendicular position relative to all the strings and has improved my ability to better play in tune (especially on the lower strings). He also stressed not to raise the index finger knuckle but to rest the index finger straight along the top of the bar. This helps to keep tension out of the left hand, so holding and moving the bar feels more relaxed. In my case, it only took a week or two to adjust to the longer bar, and as I stated above, I have gotten noticeable results.

If you see this Paul, thanks again for generously spending time with me, and confirming that I had a properly sized bar. You were very confident I would love it, and you were right!

FYI - Due to demand, BJS Bars is making several longer bars (even longer than a 12 string bar) to accommodate different hand sizes and finger lengths. The bar I bought is slightly longer than a 12 string bar, and I think is called an "extended 12 string bar".
View user's profile Send private message Send e-mail
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 22 Apr 2019 9:32 pm     Fitting a tone bar to your hand size
Reply with quote

When I became the 2nd owner of a GFI S12 U a 1" X 3 3/4" 921 Dunlop bar came with it. I have long fingers and the bar allow me to curl the end of my index finger over the bullet end a little, And it sets tight against the webb between my thumb and index finger. This bar gives me the best control I have ever experienced in playing. Ordered another bar a couple months ago it is 11.5 Oz, 1" X 3 3/4" Now I have a spare.
The bar is heavy but it takes no down pressure on the strings. Just tilt or move with no buzz or distortion.
View user's profile Send private message Send e-mail
Andy Henriksen

 

From:
Michigan, USA
Post  Posted 23 Apr 2019 5:27 am    
Reply with quote

Thank you all for your input on this. As is often the case here, the generosity is inspiring. I'll be trying one of Bill Moore's 12 string bars and if I like it, I'll probably end up with a BJS one before too long. I have a BJS lap steel bar, and it's fantastic.
View user's profile Send private message Send e-mail
Dave Mudgett


From:
Central Pennsylvania and Gallatin, Tennessee
Post  Posted 23 Apr 2019 5:52 am    
Reply with quote

I went through this exercise some years ago hanging out with Bobbe Seymour at his shop. I was having some issues with my left hand, and he looked at the bar in my hand and said, "Your fingers are real long, you need a longer bar.". He handed me an old, used 12-string bar sitting around the shop and told me to just take it. Sure enough, that was what I needed.

I got a 7/8" 12-string bar initially. I just found the combination of the longer bar at 7/8" uncomfortable, the one Bobbe gave me had a larger diameter. So I moved to 15/16" and that was it for me. I figure John Hughey somehow managed with a 15/16" diameter 12-string bar.

I go between a BJS bar and a Zirc bar of those dimensions. The Zirc is lighter and easier to handle, but there's something about the bite of the tone with the BJS to me. I probably should try one of the John Hughey BJS bars - these are hollowed out in the middle and thus lighter.
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 23 Apr 2019 7:24 am    
Reply with quote

Dave,
I have one of those John Hughey BJS bars and I really like it.
It's between that or a zirc bar, as you stated, the zirc bar is a little more mellow.
Erv
View user's profile Send private message Send e-mail
colin mcintosh

 

From:
Australia
Post  Posted 23 Apr 2019 5:58 pm    
Reply with quote

I play a 12 string and use a 7/8" x 3 1/4" bar.
With the bar protruding just short of the end of my 2nd finger and extending back to the 2nd finger knuckle,that's the perfect size for me. It allows me to arch my hand and slide the bar back to dampen notes with the 2nd finger without actually moving the hand from it's position. The size makes it easier to lift the bar to do some "penciling" with the tip. It's also a good size for rolling vibrato with the 1st finger on top.
View user's profile Send private message Send e-mail
John McClung


From:
Olympia WA, USA
Post  Posted 24 Apr 2019 4:36 am    
Reply with quote

What Collin said!

When I went to 12-string steels, I bought a BJS 12-string bar. Liked it, but found that extra length killed my ability to block high strings, especially string 1, by pulling the bar towards me and having that middle fingertip mute the strings. Went back to a 10-string bar, been there ever since.

There's nothing written in stone for pedal steel, your life likely will be spent experimenting with bars, picks, strings, guitars and other gear!
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
View user's profile Send private message Send e-mail Visit poster's website
Bobby Hearn

 

From:
Henrietta, Tx
Post  Posted 24 Apr 2019 6:48 am    
Reply with quote

I bought a 7/8 3 3/4 bar and love it. A lot more control especially on slants. Everybody’s hands are different though but adding that extra 1/4 made a huge difference.
View user's profile Send private message Send e-mail
Greg Cutshaw


From:
Corry, PA, USA
Post  Posted 24 Apr 2019 6:49 am    
Reply with quote

I love the feel and tone I get out of a 15/16" bar. It's the perfect size for me and many pro players. 7/8" is close as well but it just feels too small in my hands. If weight is a concern, you can still use a 15/16" bar and go to a zirc or hollowed out bar to achieve the same or lighter weight than the 7/8" bar. Obviously a hollowed out or zirc bar will have different tone and sustain characteristics as well which can affect your preferences.
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
Shawn Altman


From:
Georgia, USA
Post  Posted 18 Jun 2019 4:56 am    
Reply with quote

I just received my first BJS bar. 15/16 JH lite model. 8oz I will say, I never thought a bar would make that big of a difference. I'm a believer.

Packaged very well.

Butch was very helpful choosing the right bar.
View user's profile Send private message Send e-mail Visit poster's website
Stu Schulman


From:
Ulster Park New Yawk (deceased)
Post  Posted 18 Jun 2019 6:04 am    
Reply with quote

What Erv said!
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
View user's profile Send private message Send e-mail
Dustin Rigsby


From:
Parts Unknown, Ohio
Post  Posted 18 Jun 2019 8:51 am    
Reply with quote

Erv Niehaus wrote:

Paul Franklin isn't the final authority, it's up to the individual.


He is when it comes to the Paul Franklin method… LOL!
_________________
D.S. Rigsby
View user's profile Send private message Send e-mail
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 18 Jun 2019 9:17 am    
Reply with quote

Dustin Rigsby wrote:
Erv Niehaus wrote:

Paul Franklin isn't the final authority, it's up to the individual.


He is when it comes to the Paul Franklin method… LOL!


Good point!

Laughing
View user's profile Send private message Send e-mail
John Goux

 

From:
California, USA
Post  Posted 18 Jun 2019 11:05 am    
Reply with quote

I use a 15/16” BJS bar, the standard length. I found it to be a nice compromise between the 1” (which sounds best) and the 7/8”. It is very comfortable.

At Paul’s suggestion I tried the 12 string bar. I see the advantage of having the butt resting in the center of your palm. It increases stability. But for me I think the added weight of the longer bar sacrificed agility.

So it is a trade off, stability vs agility.
I’ll have to find lighter 12 string bar.

I did buy a Hillman bar at the Dallas show. It is a fine product. For me, the BJS always wins in a tone bar shootout.
John
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron