| Author |
Topic: please close |
Jeff Savage
From:
Fort Covington, NY,
|
Posted 23 Mar 2019 12:13 pm |
|
Got them,,,please clos
Last edited by Jeff Savage on 3 Apr 2019 10:37 am; edited 1 time in total |
|
|
 |
Bill Ford
From:
Graniteville SC Aiken
|
Posted 23 Mar 2019 1:59 pm
|
|
Jeff, Do you want spring pins, or dowel pins, I have seen spring pins used, and I have several 1/16 spring pins that I can send you. What length?
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!! |
|
|
|
Jeff Savage
From:
Fort Covington, NY,
|
Posted 23 Mar 2019 2:51 pm Dowel pins for Emmons SKH
|
|
| the machinist that made the fingers said that I need 1/2" x 0.625" ...he said case hardened steel...most anyone that knows about steels would know more than I do...but if they would work I'd buy some from you, thanks, I really appreciate your help. |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 23 Mar 2019 9:00 pm Dowel pins for Emmons SKH
|
|
| JEFF Just to inform you, 1/16 is .0625. Not 0.625 as you posted, That is 5/8". That decimal in the wrong place could cause you some grief. Good Luck on this project. |
|
|
|
Jeff Savage
From:
Fort Covington, NY,
|
Posted 23 Mar 2019 11:07 pm
|
|
| Thanks Bobby, not sure how to edit my post but I appreciate you letting me know about that. |
|
|
|
Bill Ford
From:
Graniteville SC Aiken
|
Posted 24 Mar 2019 4:10 am
|
|
Mike Cass. 615-446-5953. He will probably have exactly what you need.
BF
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!! |
|
|
|
Ian Worley
From:
Sacramento, CA
|
|
|
|
Jeff Savage
From:
Fort Covington, NY,
|
Posted 25 Mar 2019 1:44 am Dowel pins for Emmons SKH
|
|
| Thanks, i'll see if I can find those locally |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 25 Mar 2019 7:43 am
|
|
These folks usually have dowell pins in stock.
 |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 27 Mar 2019 6:59 am Dowel Pins
|
|
Jeff,
You should be able to find some solid steel pins locally at most any good hardware store. I'd stay away from from using spring pins if I were you.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
