| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Chris Scruggs tuning?
Goto page 1, 2  Next
Reply to topic
Author Topic:  Chris Scruggs tuning?
Andy Schick


From:
Kingston, Ontario, Canada
Post  Posted 2 Sep 2013 8:49 am    
Reply with quote

Does anyone know the tunings used by Chris Scruggs?

Thank you
View user's profile Send private message Send e-mail
Dennis Smith

 

From:
Covington, Georgia, USA
Post  Posted 2 Sep 2013 1:39 pm    
Reply with quote

In this Mel Bay interview, lesson he has C6 on neck one.
http://youtu.be/QuAchSYA6Xo
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post  Posted 3 Sep 2013 1:19 am    
Reply with quote

Here's a reply from him from a few years back on one of the forums but he does post here sometimes so we may even get a definitive answer from him on what he's using currently.


"I tune the inside to C6/a7:

E
C
A
G
E
C#
A
A (bass note)

Sometimes I drop the fourth string from G down to F#, and play it as a D9 tuning.


I tune the outside to E13:

E
C#
G#
F#
E
D
B
E
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post  Posted 4 Sep 2013 12:11 am    
Reply with quote

I just spoke to Chris on Facebook and he says he's using the exact same tunings as Kayton Roberts. C6/A7th and F13th.

F13
F
D
A
F
G
Eb
C
F

C6th+A7
E
C
A
G
E
C#
A
A (Low bass)
View user's profile Send private message Send e-mail
Paul McEvoy

 

From:
Baltimore, USA
Post  Posted 20 Mar 2019 3:54 pm    
Reply with quote

In the C6 Tuning, is the low string an octave below the next string? What gauge would work for this? And what does it give you? Is it mostly for show/effect or does it offer something significant in harmony?

Thanks!
Paul
View user's profile Send private message Send e-mail
Scott Thomas

 

Post  Posted 20 Mar 2019 4:24 pm    
Reply with quote

Paul McEvoy wrote:
In the C6 Tuning, is the low string an octave below the next string? What gauge would work for this? And what does it give you? Is it mostly for show/effect or does it offer something significant in harmony?

Thanks!
Paul


It's an octave below. .68-.72 gauge. Jerry Byrd (which is where Kayton got it from) mostly used it for a thumpy bass effect when needed.
View user's profile Send private message Send e-mail
Jim Newberry


From:
Seattle, Upper Left America
Post  Posted 21 Mar 2019 6:19 am    
Reply with quote

I guess Kayton got asked a lot....


_________________
"The Masher of Touch and Tone"

-1950 Fender Dual Pro 8
-1950's Fender Dual Pro 6
-Clinesmith D8
-Clinesmith 8-string Frypan
-Clinesmith Joaquin
-~1940 National New Yorker
-~1936 Rickenbacher B6
-Homebuilt Amps
View user's profile Send private message
Steven Cummings

 

From:
Texas
Post  Posted 21 Mar 2019 6:51 am    
Reply with quote

That's just kinda cool...
_________________
Lookin' on the sunny side....
View user's profile Send private message Send e-mail
Paul McEvoy

 

From:
Baltimore, USA
Post  Posted 21 Mar 2019 9:28 am    
Reply with quote

Amazing.
View user's profile Send private message Send e-mail
Scott Thomas

 

Post  Posted 21 Mar 2019 5:03 pm    
Reply with quote

Yeah, but it's a little early for April Fools! Laughing
View user's profile Send private message Send e-mail
Jim Newberry


From:
Seattle, Upper Left America
Post  Posted 21 Mar 2019 9:49 pm    
Reply with quote

No April's Fool joke there. That's really Kayton's headstone....
_________________
"The Masher of Touch and Tone"

-1950 Fender Dual Pro 8
-1950's Fender Dual Pro 6
-Clinesmith D8
-Clinesmith 8-string Frypan
-Clinesmith Joaquin
-~1940 National New Yorker
-~1936 Rickenbacher B6
-Homebuilt Amps
View user's profile Send private message
Scott Thomas

 

Post  Posted 21 Mar 2019 11:05 pm    
Reply with quote

Oh, the back!

duh.


That is indeed very Cool
View user's profile Send private message Send e-mail
Pete Burak

 

From:
Portland, OR USA
Post  Posted 22 Mar 2019 7:15 am    
Reply with quote

I love this Kayton vid of Opryland Swing:
https://www.youtube.com/watch?v=GkFjGDh2bB4

Check out this version!
Herb and Kayton playing Opryland Swing:
https://www.youtube.com/watch?v=AH9zNlOxOaM
View user's profile Send private message Send e-mail
John Goux

 

From:
California, USA
Post  Posted 15 May 2020 11:48 am    
Reply with quote

That headstone is hilarious.
Has anyone pointed out the tuning listed on the gravestone is written incorrectly, according to Kayton? There is no D in the F13 tuning, as the 2nd string would be. Either the gravestone photo is bogus, or Kayton had even more of a sense of humor by having the wrong notes written on his gravestone.

John


Last edited by John Goux on 7 Jun 2020 4:05 pm; edited 1 time in total
View user's profile Send private message Send e-mail
John Goux

 

From:
California, USA
Post  Posted 2 Jun 2020 12:07 pm    
Reply with quote

Kayton’s real gravestone, RIP.


View user's profile Send private message Send e-mail
Jim Newberry


From:
Seattle, Upper Left America
Post  Posted 2 Jun 2020 12:51 pm    
Reply with quote

The tunings are on the back of the headstone. I have it on the authority on one of his good friends. She says it’s in Greenbrier cemetery in Greenbrier, TN, and I think she sent me the photo originally.
_________________
"The Masher of Touch and Tone"

-1950 Fender Dual Pro 8
-1950's Fender Dual Pro 6
-Clinesmith D8
-Clinesmith 8-string Frypan
-Clinesmith Joaquin
-~1940 National New Yorker
-~1936 Rickenbacher B6
-Homebuilt Amps
View user's profile Send private message
Jim Mckay

 

From:
New Zealand
Post  Posted 2 Jun 2020 2:26 pm    
Reply with quote

John Goux wrote:

Has anyone pointed out the tuning listed on the gravestone is wrong? There is no D in the F13 tuning, as the 2nd string would be.

John

Hi John.
On another post Chris Scruggs explained Kayton sometimes dropped the D to a C for the E9th sound but up half a step. Eg. F9th.
Thats how he got that pedal steel sound on "The Waltz You Saved For Me" And of course with string pulls.
Hope that's helpful
https://www.youtube.com/watch?v=0uZ_wlu175w&t=0s&list=PLPEa63onD-qHsaYSBq907rSg88FdyygBB&index=22
_________________
Canopus d-8
Excel Jerry Byrd frypan
T-8 Stringmaster
View user's profile Send private message Send e-mail
Jim Newberry


From:
Seattle, Upper Left America
Post  Posted 2 Jun 2020 3:35 pm    
Reply with quote

Here’s a picture the front of the headstone from my friend.


_________________
"The Masher of Touch and Tone"

-1950 Fender Dual Pro 8
-1950's Fender Dual Pro 6
-Clinesmith D8
-Clinesmith 8-string Frypan
-Clinesmith Joaquin
-~1940 National New Yorker
-~1936 Rickenbacher B6
-Homebuilt Amps
View user's profile Send private message
Allan Revich


From:
Victoria, BC
Post  Posted 7 Jun 2020 8:41 am    
Reply with quote

John Goux wrote:
That headstone is hilarious.
Has anyone pointed out the tuning listed on the gravestone is wrong? There is no D in the F13 tuning, as the 2nd string would be. Either the gravestone photo is bogus, or Kayton had even more of a sense of humor by having the wrong notes written on his gravestone.

John


The tunings are not named on the gravestone. A sequence of notes for someone’s tuning can’t be “wrong”. Those were his tunings. I think it’s cool as heck that he decided to share them with us even after he moved on.
View user's profile Send private message Send e-mail Visit poster's website
Nic Neufeld


From:
Kansas City, Missouri
Post  Posted 7 Jun 2020 11:14 am    
Reply with quote

Scott Thomas wrote:
Paul McEvoy wrote:
In the C6 Tuning, is the low string an octave below the next string? What gauge would work for this? And what does it give you? Is it mostly for show/effect or does it offer something significant in harmony?

Thanks!
Paul


It's an octave below. .68-.72 gauge. Jerry Byrd (which is where Kayton got it from) mostly used it for a thumpy bass effect when needed.


It's quite similar to the Jules Ah See low C on the C13...it can of course be used for the thumpy bass effects but it does have a nice deep smooth bass addition to chords. When I retune my C13 neck to C6/A7, I do the same...6th string up to C#, 7th down a halfstep to A, 8th string down to A. I generally use a 68-70 gauge there (optimizing for C but it works for A as well).
_________________
Waikīkī, at night when the shadows are falling
I hear the rolling surf calling
Calling and calling to me
View user's profile Send private message Send e-mail
Paul Strojan

 

From:
California, USA
Post  Posted 7 Jun 2020 12:31 pm    
Reply with quote

If we translate Kayton's top neck down a half step, we get E9 (E, B, G#, E, F#, D, B, E) or C# minor. (E, C#, G#, E, F#, D, B, E). What is the logic for the middle root being positioned higher than the ninth?
View user's profile Send private message Send e-mail
John Goux

 

From:
California, USA
Post  Posted 7 Jun 2020 4:01 pm    
Reply with quote

I love Kayton’s playing and attitude. I’m a big fan of Chris, too.

Here is the master himself from a 1993 interview in Steel Guitar World magazine:

“ KR: Yes, it’s a 1951 Fender...it’s my only steel. That steel is 41 years old. I had another one time that burnt up in a fire.

SGW: I see you’re still using your old DeArmond foot pedal.

KR: Yes, Shot Jackson rebuilt that for me before he passed on and it keeps going. I just can’t seem to wear it out.

SGW: How about your tunings, can you share those with us?

KR: Well, my main tuning is C6th, that’s my bread and butter neck. It has a little variation. Staring with the first string on the small end: E, C, A, G, E, C#, A, A (an octave lower). You will notice that I have two A’s together...the second is real low for that boom effect. It’s almost like a big third more than anything else. I use it only occasionally when I’m doing some thump style. Getting back to that C#, normally if you’re playing this C6th tuning and you rake across it, it will sound out of tune. But, if you rake across the strings and leave the second string out, then you’ve got a whole new tuning...and you see that second string there, the C, if you pull that a half step, it will fall right in tune with that tuning. You can really play some jazzy sounding stuff with it. It makes a whole new ball game. It’s like having a dual tuning. And on the other neck I’ve got a special tuning...it’s for rides and special things. The first string is F, D, A, F, G, Eb, C, F, but I couldn’t remember these if I didn’t right them down. I keep a list at home in case someone calls and wants to know. Don’t mind sharing these cause I don’t have any secrets. Of course, Hank doesn’t like notes played on the high register, so I’m usually limited to playing on the lower end.”
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post  Posted 7 Jun 2020 5:39 pm    
Reply with quote

Allan Revich wrote:
A sequence of notes for someone’s tuning can’t be “wrong”. Those were his tunings. I think it’s cool as heck that he decided to share them with us even after he moved on.


The tuning is "wrong" in the sense that it is not the tuning that Kayton always said he used.

Whenever he was asked, he would say the F tuning started with F D A F. On the gravestone it starts with F C A F,
View user's profile Send private message Send e-mail
Allan Revich


From:
Victoria, BC
Post  Posted 8 Jun 2020 9:22 am    
Reply with quote

Jeff Mead wrote:
Allan Revich wrote:
A sequence of notes for someone’s tuning can’t be “wrong”. Those were his tunings. I think it’s cool as heck that he decided to share them with us even after he moved on.


The tuning is "wrong" in the sense that it is not the tuning that Kayton always said he used.

Whenever he was asked, he would say the F tuning started with F D A F. On the gravestone it starts with F C A F,


LOL! OK, I get it now. Oh Well Whoa! Smile
View user's profile Send private message Send e-mail Visit poster's website
John Goux

 

From:
California, USA
Post  Posted 11 Jun 2020 9:42 pm    
Reply with quote

Thanks Jeff. J
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron