| Author |
Topic: Pull release Emmons |
Johnie King
From:
Tennessee, USA
|
Posted 11 Feb 2019 7:04 am |
|
What’s the odds of getting a yes vote to agree on taking Emmons parts I already have an build a pull release from Emmons parts. Lowers would be strings 2/4/6/ 9
Emmons knees on left
lKL raise f sharp to g sharp an lower string six
RKR lower string two an nine
 |
|
|
 |
forrest klott
From:
Grand Rapids Mi USA
|
Posted 11 Feb 2019 9:24 am
|
|
I'm sure there are others more knowledgable that will reply, but as it's a push pull changer and parts already, why not just build it as a push pull?
Skeeter |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 11 Feb 2019 9:54 am
|
|
Thanks Forrest I think it might work better too release lowers rather than push an on a pull release with emmons knees on left you don’t have too use reverse knees.
All lowers would pull back to open tuning An too tune lowers you would use Allen screws in changer finger. It would make the tuning of lowers much simpler. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 11 Feb 2019 10:08 am
|
|
| As one that's never really understood how to tune a pull release, I too would keep it a standard Emmons PP. |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 11 Feb 2019 12:30 pm pp changer?
|
|
| johnnie, i could really use that changer, i have one of sonny purdums guitars that he was converting to an sd10 after he had several strokes, and some how the changer, and most of the undercarriage have been misplaced. i need pedals also but the ones you have won,t match as his were the wide ones....thanks jack |
|
|
|
richard burton
From:
Britain
|
Posted 11 Feb 2019 12:34 pm
|
|
You can put a Reliant 3-wheeler engine in a Jaguar E-type, just because you can doesn't mean you should 
To go one step further, in your quest for simplicity, you can install the push-pull changer, but disable it, and just use bar slants  |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 11 Feb 2019 2:22 pm
|
|
| Your right Richard |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 11 Feb 2019 2:31 pm
|
|
| Jack I haven’t give a lot of thought I was thinking someone on here might have chose too release a string on a push pull instead of pushing. |
|
|
|
