| Author |
Topic: Marlin double project ..No longer for sale I am keeping it |
Joe Romanchick
From:
Pennsylvania, USA
|
Posted 23 Jan 2019 11:16 am |
|
I am posting this again because the buyer said he was coming and now he has changed his mind..The original post is locked so I can't move it....The pictures are there on next page....
I have for sale a Marlen that I started to restore..I have lost interest in it and would like to sell..When I got it the upper neck was complete and working and the guitar had 8 pedals and 3 knee levers..The rods were missing from the lower neck..I had all new links and levers CNCd and also had another knee lever made which would make a total of 4..I purchased enough rods and collars and setscrews to complete the guitar, including new cross bars..There should be enough new CNC parts to replace everything....I may be forgetting something, but there should be enough of everything you need to put it back together again with both necks,but if I am [img]forgetting [/img]something, it is not intentional..I do not have a case for it..I do not want to ship this as I have no box or way to ship it all safely..So, if you are close enough please come and get it..There is no rush for pick up because it is not in the way....All I want is $475.00, and please believe me I have more than twice that much invested...
Last edited by Joe Romanchick on 26 Jan 2019 4:40 am; edited 1 time in total |
|
|
 |
Ian Worley
From:
Sacramento, CA
|
Posted 23 Jan 2019 12:56 pm
|
|
Let me know if you change your mind about shipping. Here's the earlier ad:
| Joe Romanchick wrote: |
I have for sale a Marlen that I started to restore..I have lost interest in it and would like to sell..When I got it the upper neck was complete and working and the guitar had 8 pedals and 3 knee levers..The rods were missing from the lower neck..I had all new links and levers CNCd and also had another knee lever made which would make a total of 4..I purchased enough rods and collars and setscrews to complete the guitar, including new cross bars..There should be enough new CNC parts to replace everything....I may be forgetting something, but there should be enough of everything you need to put it back together again with both necks,but if I am [img]forgetting [/img]something, it is not intentional..I do not have a case for it..I do not want to ship this as I have no box or way to ship it all safely..So, if you are close enough please come and get it..There is no rush for pick up because it is not in the way....All I want is $475.00, and please believe me I have more than twice that much invested...
 |
|
|
|
|
Barry Coker
From:
Bagley Alabama, USA
|
Posted 23 Jan 2019 1:19 pm
|
|
FedEx will Pack it for you and ship insured.
Barry |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 23 Jan 2019 1:23 pm PM Sent
|
|
I sent you a PM.
Last edited by Jimmie Hudson on 24 Jan 2019 2:18 pm; edited 1 time in total |
|
|
|
Joe Romanchick
From:
Pennsylvania, USA
|
Posted 23 Jan 2019 4:02 pm
|
|
As far as packing and shipping, I have used a UPS store once and they really charged a lot of money for the packing..It cost the buyer almost twice their estimate, and they wanted his credit card number up front..I am at least 30 minutes away from any of them, so I can't just go down the street to check out the competition..There is just too many loose parts and pieces,and that is why I don't want to ship it..I also want to stay in good standing here.....
This is not sold yet, because I am trying to take all the people wanting it in the order of the emails to be fair, but nobody has given me any money yet...... |
|
|
|
Joe Romanchick
From:
Pennsylvania, USA
|
Posted 24 Jan 2019 2:19 pm
|
|
| PLease note that this guitar is still for sale..No one has taken it yet even though it says that.... |
|
|
|
Bob Carlucci
From:
Candor, New York, USA
|
Posted 25 Jan 2019 5:46 am
|
|
Joe, Please check your PM.. bob
_________________
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time...... |
|
|
|
Joe Romanchick
From:
Pennsylvania, USA
|
Posted 25 Jan 2019 6:07 pm
|
|
| Bob, I did reply, waiting for you... |
|
|
|
