| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Advice Needed - Sho Bud Professional
Reply to topic
Author Topic:  Advice Needed - Sho Bud Professional
Graham Adeson

 

From:
San Francisco, CA
Post  Posted 16 Jan 2019 10:19 pm    
Reply with quote

Hi all. I'm new to the forum, and have been watching the 'For Sale' page for a first pedal steel for quite some time. Unfortunately, nothing yet has quite met my price range (and those that do seem to get sold in the blink of an eye!).

I recently ran across this Sho Bud D10 8x3 in Sacramento (I'm based in SF) that seems like a good bargain (pictures attached). If it helps here's a video the owner sent me: https://www.youtube.com/watch?v=ZvDE0lLg4uQ&feature=youtu.be.

Certainly looks like it could do with some maintenance (and it's wickedly out of tune), but is it salvageable? If so, would this be something resolved with a tune up? I'm happy to take to a mechanic and have it fixed, but don't want to have a guitar that's going to require more money put into it than I paid for up front.

I'm not entirely concerned with the aesthetic condition, just playability, sound, etc.

Thanks in advance for any advice!




















View user's profile Send private message Send e-mail
Eric Dahlhoff


From:
Point Arena, California
Post  Posted 16 Jan 2019 11:11 pm     buy it
Reply with quote

It might need some cleaning and lubrication, but it looks like an excellent ShoBud and a good price.
My 2 cents Smile
_________________
"To live outside the law you must be honest." (Bob Dylan)
View user's profile Send private message Send e-mail
Luke Sullivan


From:
El Paso de Robles, CA, USA
Post  Posted 16 Jan 2019 11:33 pm    
Reply with quote

Grab that up. Great price on a guitar from which you may never need to upgrade. Easy to work on, terrific tone, classy. Green tint undercarriage- 1973 bonus? Three knee levers may not be factory, but no problem.
_________________
Mullen PRP D10, accordions, Harmony Sovereign guitar.
View user's profile Send private message Send e-mail
Graham Adeson

 

From:
San Francisco, CA
Post  Posted 17 Jan 2019 1:56 pm    
Reply with quote

Thanks all! Appreciate the advice.

In terms of the world of potential maintenance that may be required, what are the most common types of work that could be expected? I know an additional knee lever (that I may end up installing) would cost around $150/200, but would appreciate ballpark figures on other types of maintenance for common issues.

Cheers!
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 17 Jan 2019 2:20 pm    
Reply with quote

yeah you need to grab that quick, cause it WILL go soon to someone else if you don't.. its a good deal... I am NOT a full time pedal steel mechanic for a living, and don't know what their going labor rate is, so this is strictly guesswork.. To clean both changers up without taking them apart, cleaning the entire guitar in an out, lubing it, restringing it, setting up all the changes so they are in tune, setting up the stops on pedals, levers, rod lengths etc, I would think maybe 4 hours or so labor.. thats if the parts are in good shape, and on a Rack and barrel Bud, they are probably ok..

To take the changers out, completely de gunk, polish parts etc, its a lot more work and a lot more money.. If I had that guitar here, I could have it playing soft an in tune with new strings in half a day or so, and I am not all that fast a worker.. Personally, I bet it could be up and running for a few hundred bucks including strings... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Tucker Jackson

 

From:
Portland, Oregon, USA
Post  Posted 17 Jan 2019 3:36 pm    
Reply with quote

Graham, I agree with what others have said here. It's a good enough price on a great guitar that it's worth spending a little on to get it up to speed (especially if they'll take $1000 for it -- and if you don't mind that the finish is a little worn).

You should shoot a private message to the world's leading Sho-Bud expert (and forumite), Ricky Davis. He'll give you great advice as to what kind of work you're likely to need and what it would cost. I think it's quite likely that, like Bob said, it's going to need to have the changer de-gunked of old oil. Other than that, you might get lucky and have a guitar that's in decent adjustment.

Caveat: if you're planning on gigging with this guitar and, say, dragging it onto a BART train, keep in mind that it weighs just shy of one million pounds. Killer PSG, but the weight can make it a no-go for some. If that's you, a modern lightweight single-neck (or SD-10) might be a better choice and could be had for what you'll end up putting into this classic Sho-Bud to get it playable.
View user's profile Send private message Send e-mail
Carol Teston

 

From:
South Carolina, USA
Post  Posted 20 Jan 2019 5:58 pm     Instructionjs
Reply with quote

CAN ANYONE SEND ME INSTRUCTIONS FOR POSTING PICTURES ON THE FORUM

THANKS cAROL
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 21 Jan 2019 8:26 am    
Reply with quote

Check the post at the top of this page:

https://bb.steelguitarforum.com/viewforum.php?f=7
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Graham Adeson

 

From:
San Francisco, CA
Post  Posted 21 Jan 2019 6:37 pm    
Reply with quote

For those interested - I ended up making the purchase. Little more rust than I expected, and changer probably needs a good clean, but all in all looks to be in salvageable shape!

Another post inbound on maintenance advice!
View user's profile Send private message Send e-mail
Dan Robinson


From:
Colorado, USA
Post  Posted 21 Jan 2019 8:31 pm    
Reply with quote

Hi Graham,

Cool Sho-Bud! Welcome to the madness. It's "a nice little hobby."

https://bb.steelguitarforum.com/viewtopic.php?t=166611&postdays=0&postorder=asc&start=400
View user's profile Send private message Send e-mail
Billy Carr

 

From:
Seminary, Mississippi, USA (deceased)
Post  Posted 24 Jan 2019 1:25 am     Sho-Bud Professional
Reply with quote

Don't forget to buy a dolly also. At booger's heavy !!
View user's profile Send private message
Jack Turlington

 

From:
Toccoa, GA, USA
Post  Posted 31 Jan 2019 5:58 am    
Reply with quote

Congrats Graham!
I've owned a Sho Bud Professional for about 39-40 years and have never had one problem with it. It is the same color as yours, looks just like it, well except for the rust and dirt that can be remedied, and mine has 5 knee levers. Every time I consider selling it because of the weight, I play it again and the tone is so good I can't do it. I played it out on gigs for many years. Now it's the steel I leave set up for band rehearsals.
With a little tlc it should serve you for years.
_________________
Emmons LeGrande lll 9x9, Sho-Bud Professional D10 8x5, Sho Bud S10 Professional, Excel D10 8x5, Fender Stringmaster S8, Early '50's Fender D8, GTR Banjo, Melobar Flying V, Cat Can, Hound Dog OMI Dobro, Thinline Tele, Nashville 400, PX300, Profex ll, and a boatload of harmonicas.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron