| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic My new tt-12 speaker cabinet. A conversation piece
Goto page 1, 2  Next
Reply to topic
Author Topic:  My new tt-12 speaker cabinet. A conversation piece
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 14 Jan 2019 8:57 pm    
Reply with quote

So I made yet another cabinet. I used it Saturday on steel with a country band and it sounded great. I'll use it on jazz bass next weekend with a piano trio. It's my Travis Toy TT-12 in a 12" dia. x 13" high concrete form tube. It weighs about 12 lbs. It's closed back, there's no cabinet vibration because it's a cylinder, and I aim it at the ceiling with an adjustable reflector so it's almost omnidirectional (not beamey) and the indirect sound takes the edge off the mids a bit. The best part was that the drummer thought the sound guy was micing a wastebasket.

_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Chris Reesor

 

From:
British Columbia, Canada
Post  Posted 14 Jan 2019 10:40 pm    
Reply with quote

Hope nobody mistakes it for a porta potty, Glenn. Winking
_________________
Excel Superb U12, MIJ Squier tele, modified Deluxe Reverb RI, Cube 80XL, self built acoustics & mandolins
View user's profile Send private message Send e-mail
Georg Sørtun


From:
Mandal, Agder, Norway
Post  Posted 14 Jan 2019 10:57 pm    
Reply with quote

How about standing waves /resonance frequencies?
View user's profile Send private message Send e-mail Visit poster's website
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2019 5:54 am    
Reply with quote

I have a thick cardboard divider inside running vertically to cut the cylinder into 2 "half-pipes" to break up the horizontal modes. Because of the speaker cone and the fact that the pipe dia is about the same, there are no parallel surfaces in the vertical direction except for the narrow speaker mounting ring. The volume is stuffed with long fiber wool. The volume looks small, but it's actually tuned for max flat according to TS, and the stuffing moves the tuning in the lower q direction.
Good question George
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2019 5:56 am    
Reply with quote

Chris, I'm more worried about somebody tossing their cookies
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Bill A. Moore


From:
Silver City, New Mexico, USA
Post  Posted 15 Jan 2019 7:44 am    
Reply with quote

I saw this design years ago in Speaker Builder magazine. Their cab had a down firing speaker, and a cone on top to distribute the sound 360 degrees, (it was also intended for bass).
I never got around to building one, thanks for the post!
View user's profile Send private message Send e-mail
J Fletcher

 

From:
London,Ont,Canada
Post  Posted 15 Jan 2019 10:49 am    
Reply with quote

Thinking outside of the box , indeed. I would be interested in the build specs . Length of the tube? ... Jerry
View user's profile Send private message Send e-mail
George Kimery

 

From:
Limestone, TN, USA
Post  Posted 15 Jan 2019 12:39 pm     My new TT-12 speaker. A conversation piece
Reply with quote

I'm with you on the cabinet construction, but I don't understand what that hinged disc sticking up is.I assume it's a pressure zone mic of some sort. Looks like the top of a trash can.
View user's profile Send private message Send e-mail
Tom Gorr

 

From:
Three Hills, Alberta
Post  Posted 15 Jan 2019 1:24 pm    
Reply with quote

Looks like a beam reflector thst doubles as a speaker protector
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2019 1:26 pm    
Reply with quote

Bill - wow! I wrote an article for Speaker Builder magazine where I build a pair of transmission lines for Bass with 18" speakers. They looked like hot water heaters. It was: "Cylindrical Symmetric Guitar TLs", Glenn DeMichele, Speaker Builder, 1/90

This speaker is just a closed box design and not a transmission line like my article. I used tubes again because they are really light and ultra-rigid because in a cylinder, there are no walls to bow. This is why they make fire hoses round instead of square.
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...


Last edited by Glenn Demichele on 15 Jan 2019 1:36 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2019 1:30 pm    
Reply with quote

Hi George: Yeah it's just a reflector to bounce the sound out rather than let it go straight up. It's just a piece of 3/16" plywood with an adjustable bracket. The bracket is just screwed to the grille and a bit flimsy. I might refine that part of it a bit.
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2019 1:42 pm    
Reply with quote

Jerry:
You can buy a 4' length of 12" dia. "Sonotube" or "Quickrete" concrete forms at Home Depot for about $12.
I used 13" of it. The actual cabinet volume you need will depend on the speaker you use, and how low in bass you want to go. They have a wax coating on the inside, and you have to sand that off wherever you want to try and glue. I also put a reinforcing backing board inside under the handle. A 3/8 piece of plywood is the bottom, and a ring of it glued to the inside of the top mounts the speaker.
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Roman Sonnleitner


From:
Vienna, Austria
Post  Posted 15 Jan 2019 2:06 pm    
Reply with quote

Very cool - like an Acoustic Image Upshot.
View user's profile Send private message Send e-mail Visit poster's website
Bill A. Moore


From:
Silver City, New Mexico, USA
Post  Posted 15 Jan 2019 3:21 pm    
Reply with quote

Glenn, I guess you've been doing this a while then!
As I am recalling now, the speaker was down firing, but mounted at the top with a flat plate above the magnet to force horizonal dispersion.
View user's profile Send private message Send e-mail
Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 15 Jan 2019 3:37 pm    
Reply with quote

Wow, I admire your creativity. 👍
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2019 5:58 pm    
Reply with quote

I wish more of my audience members would say that.
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
George Kimery

 

From:
Limestone, TN, USA
Post  Posted 15 Jan 2019 6:43 pm     My new TT-12 speaker. A conversation piece
Reply with quote

Is the end of the tube open or closed? How does it sound when placed in a normal speaker position facing the audience? Have you tried placing it on the floor with a V block to tilt it up? How about turning an amp stand sideways and laying it on that? This would be so simple and cheap to make, it's scary. Spray it with truck bed liner or cover it with tolex, put a round metal grill front on it, and you would have a sharp, contemporary looking cabinet. This design intrigues me. I may make up one. The worst that could happen is I could use it for practice if nothing else.

Thanks for sharing this.
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2019 7:04 pm    
Reply with quote

Hi George:
Its closed. You could build this in a bucket if you wanted, but you'd probably have to reinforce the bottom because that's a flat surface.
You can set it in the floor without a reflector facing the audience too, but it's a bit beamy. My buddy said it looked like a fan he uses drying out flooded carpets. I took a piece of the extra tube material and a wood square and made a little curved stand so I could angle it up toward me at about 45 degrees. That worked OK, but the stand was another piece to bring to the gig. You could even use tom-tom hardware to angle it if you want. All that mounting stuff though is external to the kernal of the speaker, which is a closed cylinder which is really light because it's cardboard, and super rigid and uncolored because its a cylinder.
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2019 7:18 pm    
Reply with quote

Bill made me nostalgic, and I re-read my bass cabinet article in Speaker Builder magazine from 1990. I was single, playing a lot, had a great-fitting tux, and had no idea that I would someday become obsessed with PSG. Here's a pic of the first page. I'm more than happy to send you a .pdf of the full article if you PM me your email address.


_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2019 7:36 pm    
Reply with quote

I had to laugh when I re-read it. Technology changes!
Here are some quotes:
"They had to fit in my car"
"Wrap continuous form computer paper tightly around the tube ... to cut it square" Good luck finding that paper nowadays.
"Look in the Yellow pages for Fibre Drums"
"The completed woofer cabinets weigh only 60 lbs. each"

But, the laws of physics haven't changed, and they were 18" speakers.
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 20 Jan 2019 8:15 pm    
Reply with quote

I ripped out the steel grid, and used the ring with a wood insert I made. I got a "friction hinge" or "position hinge" from Amazon to use instead of the bulky metal lid positioner I was using. It really looks like an "elf toilet" now. Works great though. I used it on bass last night. The TT-12 really got a great fretless sound with my piezo pickup. I will use it in its current form on my first steel gig on Thursday. In my basement, the speaker sounds really omnidirectional and seems to come from everywhere.


_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Jim Pitman

 

From:
Waterbury Ctr. VT 05677 USA
Post  Posted 21 Jan 2019 8:23 pm    
Reply with quote

Glenn thanks so much for sharing this with us.
What brand/model speaker did you put in it?
That's got to be the least expensive speaker cab ever.
A great example of re-purposing a mass produced commodity item.
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 21 Jan 2019 9:44 pm    
Reply with quote

It's a Travis toy tt-12.
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 27 Jan 2019 12:37 pm    
Reply with quote

I made some revisions, including a friction hinge and Velcro for the top, a sparser grille, and a strap so I can carry it like a bucket. Here's more pics so you can build one. It sounded great on the gig Friday. My sound was everywhere, not just in front of the cab.



_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Stu Schulman


From:
Ulster Park New Yawk (deceased)
Post  Posted 28 Jan 2019 5:51 am    
Reply with quote

Extremely Awesome!
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron