Suggestions for Goth replacement pegs for Emmons PP

Dag Wolf · From: Bergen, Norway

I need to replace the pegs on my -68 Emmons and need to get the correct type of Gothos pegs. I need the type # and a place where to get them.

Thanks group.

Dag

Per Berner · From: Skovde, Sweden

Hei Dag!

Depending on which knob type you need, some of these should fit.

https://www.stewmac.com/Hardware_and_Parts/Tuning_Machines/Solid_Peghead_Guitar_Tuning_Machines/?facet=%7cBRAND%3aGOTOH

On the site you will find detailed drawings with all vital measurements. I bought 2 sets of #0933 for my early 70s S10 PP and they look identical to the original Klusons â€“ haven't installed them yet, though.

...eller kanskje disse "ekte" Kluson fra tyske Rockinger?

https://www.rockinger.com/index.php/de/KLUSON-DELUXE-Single-Line-Stamp/c-WG063/a-0488C

mtulbert · From: Plano, Texas 75023

Hey Guys,

These work great but there is one caveat. The mounting screws provided will not work!!!. Save the old ones and when the new tuners are ready to be installed you will need to tap the mounting holes out a little bit on the tuners to enable the original screws to fit. Majorly easy and it sounds more complicated than it is but there is nothing to it and these tuners work great.
_________________
Mark T

Infinity D-10 Justice SD-10 Judge Revelation Octal Preamp, Fractal AXE III, Fender FRFR 12

Erv Niehaus · From: Litchfield, MN, USA

You don't need to tap the holes, just drill them out a little larger.
Erv

mtulbert · From: Plano, Texas 75023

Thanks Erv,

That is what I meant to say.. Now you know why I flunked shop in high school.. Laughing

_________________
Mark T

Infinity D-10 Justice SD-10 Judge Revelation Octal Preamp, Fractal AXE III, Fender FRFR 12

Erv Niehaus · From: Litchfield, MN, USA

Mark,
That's OK, I flunked home ec. Rolling Eyes

Erv

Dag Wolf · From: Bergen, Norway

Thank guys! ðŸ˜ƒ

Donny Hinson · From: Glen Burnie, Md. U.S.A.

"Goth" tuners? Mr. Green

Maybe these would qualify:

Dag Wolf · From: Bergen, Norway

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: