| Author |
Topic: Emmons front-apron |
Roger Rettig
From:
Naples, FL
|
Posted 30 Dec 2018 6:45 am |
|
I posted last week to the effect that the decorative strip had become detached and I got several helpful responses regarding the best glue to use.
Here's the strip - there's glue residue along the length of it. Should I attempt to remove that and, if so, what can I use that won't affect the material?
Thanks for any help you can give me.
_________________
Roger Rettig: Emmons D10, B-bender Teles, Martins, and a Gibson Super 400!
---------------------------------- |
|
|
 |
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 30 Dec 2018 8:28 am
|
|
| The strip is aluminum so not too much can hurt it short of ammonia based cleaners. Lacquer thinner would do it but not good to breathe - sand paper takes the most work but is safe and does a good job. |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 30 Dec 2018 8:32 am
|
|
Thank you, Jim.
_________________
Roger Rettig: Emmons D10, B-bender Teles, Martins, and a Gibson Super 400!
---------------------------------- |
|
|
|
Bill Cunningham
From:
Atlanta, Ga. USA
|
Posted 30 Dec 2018 9:21 am
|
|
Lighter fluid is probably a good option.
_________________
Bill Cunningham
Atlanta, GA |
|
|
|
Per Berner
From:
Skovde, Sweden
|
Posted 31 Dec 2018 1:22 am
|
|
| A razor blade scraper would probably also do the job, if the glue residue is dry. Make sure the wood is equally flattened before applying the glue. |
|
|
|
Gary Patterson
From:
Gallatin, TN
|
Posted 31 Dec 2018 7:06 am
|
|
| Goo Gone is a good prospective solvent. In any case, it won't hurt anything. |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 1 Jan 2019 11:16 pm
|
|
Acetone will do it, just put it on good, let it set few minutes and old glue will peel tight off.
Goo gone did nothing to last one I did and neither did paint thinner. Acetone works great. Also, a blow torch will burn it off, just don’t get strip too hot to warp.
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
