| Author |
Topic: Pedal rack on Carter wing nut size? |
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 22 Dec 2018 1:07 am |
|
I am curious about the size of the wing nuts that. Attach the pedal rack on a Carter D-10.
Thanks,Stu
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
 |
John Swain
From:
Winchester, Va
|
Posted 22 Dec 2018 6:56 am
|
|
| Off-hand I can't remember, but I know I took the original one to Lowe's and bought the same thread size with bigger "wings" to make it easier to tighten ! |
|
|
|
John Swain
From:
Winchester, Va
|
Posted 22 Dec 2018 6:58 am
|
|
| Actually, I drilled out the pedal bar and moved up to the next size thread. Slow memory ! |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 22 Dec 2018 7:15 am
|
|
| '95 D10....wing nut is 10-32. |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 22 Dec 2018 7:54 am
|
|
That's small. Go up to 1/4" like John.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
Jon Light (deceased)
From:
Saugerties, NY
|
Posted 22 Dec 2018 8:07 am
|
|
| I was going to upsize the bolt on a different guitar but the sliding slot on the moving part wouldn't take it. Filing the slot wider seemed like a sloppy situation. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 22 Dec 2018 10:03 am
|
|
Get rid of those darn wing nuts. Go to a good hardware store and get some threaded knobs. The ones with plastic grips so you can turn them easier.
Is there a problem that requires re-drilling and moving to a different size? If not, I think that is unnecessary. I've had my Carter since '99, and never had issues with the wingnuts or screws.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 22 Dec 2018 10:03 am
|
|
Jerry 10/32"is it..I am trying to find a plastic wheel thumbing?
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 22 Dec 2018 10:14 am
|
|
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 22 Dec 2018 10:39 am
|
|
Richard,Exactly having trouble finding those?
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 22 Dec 2018 11:01 am
|
|
amazon.com....type "plastic knobs 10-32" in search box.
A really good local hardware store, if there are any of those left, might have it....a little more difficult due to the fine thread. |
|
|
|
Jon Light (deceased)
From:
Saugerties, NY
|
Posted 22 Dec 2018 11:12 am
|
|
Thanks Jerry. Stu & I have been kicking this around and I've been limited in my search by the use of the name "thumb nuts". Yep--those are them.
It is worth mentioning that there IS such a thing as getting something too large. Something protruding too much can get in the way of the volume pedal depending on where you set it or if it walks on you. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 22 Dec 2018 11:20 am
|
|
True...also, the bolts on this Carter are just standard cross point screws with a locking not on the back side of the bar.
One might need to shorten the bolt, or use a shorter one to keep the knob from bottoming out...I think the triangular one shows 1 1/8" of threads, so probably good.
There is also a nylon wing type nut but with wider, sturdier and flatter wings that needs less space than the knob, but I'm not finding those at the moment. |
|
|
|
Jon Light (deceased)
From:
Saugerties, NY
|
Posted 22 Dec 2018 11:28 am
|
|
| For that bottoming out reason, I'd definitely go with a through-hole knob. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 22 Dec 2018 2:16 pm
|
|
| ....or you could just drill a hole in the face for the screw to poke through. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 22 Dec 2018 3:05 pm
|
|
Through hole not necessary. There is plenty of thread inside to fit the screw. I got mine at Ace. In the past, I have found them at Home Depot.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 22 Dec 2018 3:50 pm
|
|
clickhere
Another option, different style through nut...no minimum but $9 service chg. small orders. |
|
|
|
Edward Rhea
From:
Medford Oklahoma, USA
|
Posted 22 Dec 2018 4:44 pm
|
|
Jerry, I’ve got some of those in my pac-a-seat(for just in case!). Pretty sure sure I paid about $1.65 each at a farm supply store in their hardware section! They fit both of my Sho~Buds.
_________________
“TONESNOB” |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 23 Dec 2018 12:42 am
|
|
I've been to Ace Hardware,Lowes,and Home Depot,Nothing yet...couldn't find anything on Amazon when I searched for plastic knobs 10/32".
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 23 Dec 2018 1:16 am
|
|
I just found some on Amazon...geez!
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 23 Dec 2018 7:33 am
|
|
In the hardware stores, they are in the drawers in the nut and bolts aisle. The same drawers that you would find things like cotter pins, roll pins, other oddball hardware.
I know Stu found some, so this info is for others wanting to replace those freakin' wing nuts. Have lost several of those over the years.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
|
|
|
Mark van Allen
From:
Watkinsville, Ga. USA
|
Posted 28 Dec 2018 5:59 am
|
|
Where ever you find them and for what ever brand guitar, I always tell my students to just get spares for those and your pak seat nut. If you are on a stage with an impenetrable crack anywhere on stage, they WILL find it and disappear!
_________________
Stop by the Steel Store at: www.markvanallen.com
www.musicfarmstudio.com |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 28 Dec 2018 8:12 am
|
|
| Mark van Allen wrote: |
| Where ever you find them and for what ever brand guitar, I always tell my students to just get spares for those and your pak seat nut. If you are on a stage with an impenetrable crack anywhere on stage, they WILL find it and disappear! |
Exactly. Though I never thought to have a spare, that's a good idea. I do carry spare wing nuts though, just in case. I've had wing nuts disappear. I need to get some of these knobs for the Mullen I got a year ago.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 28 Dec 2018 8:56 am
|
|
Mark Van...good advice!!
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
