| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Pad for Pedal Steel
Reply to topic
Author Topic:  Pad for Pedal Steel
James Quackenbush

 

From:
Pomona, New York, USA
Post  Posted 17 Jul 2005 2:59 pm    
Reply with quote

I am writing about this pad that I recently recieved from Mr Donald Blood of Illinois..
I saw an ad on ebay that had to do with a pad that bolt's on to the back leg's of a pedal steel so that you can have a pad on that single neck pedal steel http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7336102683&category=623&rd=1

.... Some guys say a pad slows them down...My feeling is that I'm sure that there are more players that would like to have a rest for their arm's but don't want to carry all that extra weight ... None of us are getting any younger, and this pad that Don made me is GREAT !!.....He has a standard pad for standard pedal steel's, and will make Custom pads at an additional cost ...The craftsmanship is really nice , and it's all made from aluminum ....The pad not only slides up and down the back legs for height adjustment, but it also slides closer or further from the steel ... Don will soon join the forum as I told him about what a great bunch of guy's we have on this forum , and how his product would be put to good use ....He made me a custom pad because he had to RE-make the mounts for me ....I play a Sierra with square legs !!....He went the extra mile and made the setup for me ....It fit's like it was made for the steel ... I 'm going to Fla. in the morning , and I'm not sure how to post pictures, but if you go to Ebay and type in "Pedal Steel " in the ebay search, they will come up ....Don is a great guy, and also makes a great product....He has a few different colors too .....I just wanted to let you guy's know that he is a standup guy, and makes a standup product .. IF you would like to contact him, he is at
donald.blood@verizon.net .....All of you that know me, know that I like to help out the "little guy" who is getting started....I haven't been let down yet !!..The last guy I raved about his product when he was getting started was Jerry Wallace ....We all know about Truetone pickups don't we ? .....Sincerely, Jim

[This message was edited by James Quackenbush on 17 July 2005 at 06:40 PM.]

View user's profile Send private message Send e-mail
Sonny Miller

 

From:
Lino Lakes, Minnesota, USA
Post  Posted 23 Jul 2005 4:26 pm    
Reply with quote

Because of a physical disability, Don has been working with me,to adjust that disability to the Pad on my SD.
It calls for some extra thought in the physical properties of the pad itself.
Since Don has a desire to please,there will be ample demand for his services, in the future.
If anyone is using a S10 and needs the SD feature give him a shout, as this is a very good looking addition to the S10, making it a beautiful SD10 conversion.
donald.blood@verizon.net


View user's profile Send private message Send e-mail
John Bechtel


From:
Nashville, Tennessee, R.I.P.
Post  Posted 23 Jul 2005 8:43 pm    
Reply with quote

James;
That sounds like a better idea then a friend of mine had, even if just for l©©ks! My friend had a Black S–10 Franklin and he glued a block of wood (painted black) about 1½”x1½”x6” onto the top of the cabinet beside the neck, for a hand~rest. It worked, but; I would have at least covered the block w/foam & Naugahyde! Nah!

------------------
“Big John” Bechtel
’04 SD–10 Black Derby w/3 & 5 & Pad
’49-’50 Fender T–8 Custom
’65 Re-Issue Fender Twin–Reverb Custom™ 15” Eminence
web site
View user's profile Send private message Send e-mail
James Quackenbush

 

From:
Pomona, New York, USA
Post  Posted 25 Jul 2005 6:30 am    
Reply with quote

John,
Don goe's a little further than a block of wood !!....LOL !!.... These pad's really look GREAT !! Very solid, comfortable, adjustable , and very functional ..
HIGHLY recommended !!....Jim
View user's profile Send private message Send e-mail
Don Blood


From:
Illinois, USA
Post  Posted 12 Sep 2005 8:48 am    
Reply with quote

Jim & Sonny, Thanks for the kind words. If anyone out there is interested in a pad for your steel, give me a shout--- donald.blood@verizon.net or call 217-935-9192.
I'd be more than happy to talk to you about these, or email you pictures.

Don Blood
View user's profile Send private message Send e-mail Visit poster's website
James Stewart Jr


From:
Vero Beach Florida
Post  Posted 12 Sep 2005 10:27 am    
Reply with quote

This I feel -Has great potential.

------------------
1975 Sho~Bud Pro III Custom (8-7)
1981 Peavey Session 500


[This message was edited by James Stewart Jr on 12 September 2005 at 11:28 AM.]

View user's profile Send private message Send e-mail
Don Blood


From:
Illinois, USA
Post  Posted 21 Sep 2005 9:43 pm    
Reply with quote

Just posted some new colors for the Arm rests on ebay http://cgi.ebay.com/Pedal-Steel-Guitar-Arm-Rest-Adjustable_W0QQitemZ7351853440QQcategoryZ623QQrdZ1QQcmdZViewItem
If you're thinking about adding a pad, I'll do whatever it takes to make it fit, or refund your money. Thanks, Don Blood
View user's profile Send private message Send e-mail Visit poster's website
Paul Norman

 

From:
Washington, North Carolina, USA
Post  Posted 27 Sep 2005 3:11 pm    
Reply with quote

I bought a pad From Donald for a friend.
He loves it. It is very neat and attractive,
adjustable to most guitars, and very comfortable.
View user's profile Send private message Send e-mail
Al Marcus


From:
Cedar Springs,MI USA (deceased)
Post  Posted 28 Sep 2005 6:31 am    
Reply with quote

James-Thanks for the post. This looks like a nice light weight and inexpensive solution to replace buyting a SD 10 guitar. Now you can get a S10 for less money and put this on and have it both ways. Should be a good seller for guys who want a pad.
............al

------------------
My Website..... www.cmedic.net/~almarcus/

View user's profile Send private message Visit poster's website
Dave Zirbel


From:
Sebastopol, CA USA
Post  Posted 28 Sep 2005 7:10 am    
Reply with quote

Don, do you offer pads for for single neck guitars on double bodies? I'm converting a double neck to a single on a double frame and would like to have a pad.

Thanks, Dave Z
View user's profile Send private message Send e-mail
Don Blood


From:
Illinois, USA
Post  Posted 28 Sep 2005 7:33 am    
Reply with quote

Dave,
Yes I do, Just let me know the size: length, width, and thickness, and color.
Don

[This message was edited by Don Blood on 29 September 2005 at 10:20 AM.]

View user's profile Send private message Send e-mail Visit poster's website
Sonny Miller

 

From:
Lino Lakes, Minnesota, USA
Post  Posted 28 Sep 2005 9:58 am    
Reply with quote

Dave, Heres my story.My Stroke from 1990 was making me put too much pressure on a nice new pad. I have a 2003 Willie SD 10,and had a new pad made, because the original pad, had too light a foam 1/4 in., and was digging into my elbow. I even made a newer one using twice the thickness of foam,1/2 inch, but i ended up with a pad that did not feel any good .
I could feel the wood right thru the Naugahyde digging into a almost bloody elbow.
Don was told i needed a newer way to make the pad, as the rubber foam that was used was not strong enough to hold my right arm up.. and he did just that. He created just what i needed for the amount of pressure i was using on the pad. This man is a true genius, and really aims to give you what you really want. He is not about, price , but customer satisfaction, and is truly dedicated. Everytime i sit down at this masterpiece, i smile as this pad is indeed built to perfection. It has several innovations on this pad, and it really works well. Anone looking for a better pad should check him out.
Thanks Don Blood
View user's profile Send private message Send e-mail
Don Blood


From:
Illinois, USA
Post  Posted 3 Oct 2005 12:15 am    
Reply with quote

Paul and Sonny, thanks saying good things about the pads. I made some extra pads to take to St.Louis this past labor day, but unfortunately my dad passed away and I cancelled my trip.
Now that I have the extras I'm thinking of having some kind of special sale, but I haven't yet figured out the details.
I'm posting some links to pictures of a couple of the special pads I made. Two are of Jim's sierra with the rectangular legs, since he started this post. The other two are of a Carter starter with a narrow pad I made which is shorter than the ones I usually make.
If anyone is interested in a good deal, this is the time. Thanks.
http://www.imagehosting.us/index.php?action=show&ident=738708 http://www.imagehosting.us/index.php?action=show&ident=738720 http://www.imagehosting.us/index.php?action=show&ident=738747 http://www.imagehosting.us/index.php?action=show&ident=738754
View user's profile Send private message Send e-mail Visit poster's website
Charlie McDonald


From:
out of the blue
Post  Posted 3 Oct 2005 2:53 am    
Reply with quote

Don,
I've seen your pads, and they look very fine. Nice-looking hardware.
I may want a black Carter Starter pad if the price is right. Please drop me an email with your price.
Thanks,
Charlie
View user's profile Send private message Send e-mail
James Quackenbush

 

From:
Pomona, New York, USA
Post  Posted 3 Oct 2005 8:25 am    
Reply with quote

I had a situation on my Sierra where every time I was playing my steel , my strings would short out on the pickups ( Danny Shields ) as I liked the tone where they were adjusted , but the strings kept hitting the pole pieces from the weight of my hand ....If I held my hands up high in the air it was OK , but I could not relax to play as I was always concentrating on holding my hands in a less than comfortable position ...Enter Don's pad ...One of the things about Don's pad is the fact that it is not only a pad , but an ADJUSTABLE pad that you can adjust to the height that you desire ....This pad is not only comfortable , but looks GREAT ...It will also allow you to have the smaller, lighter, case , and guitar with the convienience of a pad...None of us are getting any younger, and I highly reccomend this pad ...You could not ask for a better person to work wtih than Don either ... He's a real craftsman !!.......Sincerely, Jim
View user's profile Send private message Send e-mail
Don Blood


From:
Illinois, USA
Post  Posted 8 Oct 2005 11:23 pm    
Reply with quote

Thanks Jim!
View user's profile Send private message Send e-mail Visit poster's website
Chuck Hall


From:
Warner Robins, Ga, USA
Post  Posted 9 Oct 2005 6:09 am    
Reply with quote

Don

Why not give a thought to offering them through the forum as well. See bOb for further details. lol

------------------
EMCI D10 8/4 and Nashville 400

View user's profile Send private message Send e-mail Visit poster's website
Don Blood


From:
Illinois, USA
Post  Posted 18 Oct 2005 7:44 pm    
Reply with quote

They're still for sale, just in case anyone is wondering!
View user's profile Send private message Send e-mail Visit poster's website
Don Blood


From:
Illinois, USA
Post  Posted 25 Oct 2005 7:55 pm    
Reply with quote

Seems like a good time for a bump.
View user's profile Send private message Send e-mail Visit poster's website
Don Blood


From:
Illinois, USA
Post  Posted 31 Oct 2005 8:28 pm    
Reply with quote

I can make it any size. Your choice, Quick turn around. 217-935-9192.
View user's profile Send private message Send e-mail Visit poster's website
Don Blood


From:
Illinois, USA
Post  Posted 27 Nov 2005 7:34 pm    
Reply with quote

Special Deal for Christmas, email for details.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron