| Author |
Topic: longer pedal rod adjusters? |
Gary Rue
From:
Maryland, USA
|
Posted 10 Sep 2018 4:07 am |
|
| Does anyone know of longer pedal rod adjusters? My adjustment is on the bottom threads and need about another 1/4". |
|
|
 |
Robert Murphy
From:
West Virginia
|
Posted 10 Sep 2018 5:33 am
|
|
| Gary I made my own from threaded couplers and all thread from the local hardware store. Mine were 10-32. |
|
|
|
Gary Rue
From:
Maryland, USA
|
Posted 11 Sep 2018 4:39 am thanks
|
|
they have a spring loaded cover that slips over the ball. I was hoping not to look add a female thread section and extension stud. I only need about a 1/4". Just trying to add more threads to the adjustment I have.
Thought
a clever machinst may have made them longer. Would be a easy way to extend but buying long rods is probably less money than the work involved. |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 11 Sep 2018 7:43 am
|
|
Shorten the legs a 1/4". 
Erv |
|
|
|
Gary Rue
From:
Maryland, USA
|
Posted 11 Sep 2018 8:58 pm need longer not shorter
|
|
| Need a littler longer. At the bottom of adjustment. Talking a few threads. My thought was a longer female threaded cyclinder on the bottom rod clip would be another way to extend the rod length. Thought someone in the forum may have produced the idea. |
|
|
|
Butch Mullen
From:
North Carolina, USA 28681
|
Posted 12 Sep 2018 9:44 am
|
|
| I have raised the pedal bar slightly thus lowering the pedal. |
|
|
|
Gary Rue
From:
Maryland, USA
|
Posted 13 Sep 2018 8:29 pm thanks
|
|
| Thanks Butch. There is a pitch there. |
|
|
|
