| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Tenth string
Goto page 1, 2  Next
Reply to topic
Author Topic:  Tenth string
dana Murphy

 

From:
clarksburg wv usa
Post  Posted 26 Jul 2018 7:13 am    
Reply with quote

wanting to know if enyone would have info or pix on how buddy was able to engage the tenth in & out on the zumsteel thanks dana
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 26 Jul 2018 8:36 am    
Reply with quote

If I understand your question, you want to know he uses the 10th string. He picks it with his thumb. And it doesn't matter which guitar. If you're asking something else, it's not clear.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Clyde Lane

 

From:
Glasgow, Kentucky, USA
Post  Posted 26 Jul 2018 8:52 am    
Reply with quote

Not sure, but I think he just backed of the nylon tuning nut.
_________________
Clyde Lane
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 26 Jul 2018 9:12 am    
Reply with quote

I'm confused. Whoa!
View user's profile Send private message Send e-mail
Brint Hannay

 

From:
Maryland, USA
Post  Posted 26 Jul 2018 9:24 am    
Reply with quote

Buddy said he liked to leave the 10th string unchanged on the A pedal, only raising the 5th string, so he could get an A chord with B "bass" note when pressing A & B pedals. I would assume Clyde's idea of what he did is correct (though I don't claim to know).
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 26 Jul 2018 9:36 am    
Reply with quote

View user's profile Send private message Send e-mail
Brint Hannay

 

From:
Maryland, USA
Post  Posted 26 Jul 2018 9:48 am    
Reply with quote

You beat me to it, Fred. With that setup, he didn't need to change anything on the A pedal. A lot of good ideas in that copedent (not surprisingly).
View user's profile Send private message Send e-mail
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 26 Jul 2018 10:43 am     Tenth String
Reply with quote

There was an article that I seen somewhere here on the internet a few weeks ago, It may have been a link we could go to here on the forum. They was talking about Mr. Emmons guitar. He had a lever or knob up near the key head where he could disconnect or connect a pull on 1 string when he wanted to.
I don't trust my memory but I think it was on the 10th string. I have also wondered if there some more disconnects they did not talk about.
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 26 Jul 2018 10:52 am    
Reply with quote

Yeah Bobby, I remember that thread. That knob he had may have been for an S10 guitar, whereas the copedent pictured in my post is probably from a D10 setup.
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 26 Jul 2018 11:07 am    
Reply with quote

Ahh... Now I understand.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 26 Jul 2018 11:39 am    
Reply with quote

I didn’t understand the question at first either. And until we hear from Dana, maybe we still don’t get it.
View user's profile Send private message Send e-mail
Roger Rettig


From:
Naples, FL
Post  Posted 26 Jul 2018 3:42 pm    
Reply with quote

I've always wanted to be able to get a '4' chord (pedals down) but with a 5th (B) on the 10th string.

I decided to go with the 'Isaacs' pedal (raises the 5th and 6th strings to C# and A respectively) as my fourth E9 pedal.

My Zum Encore is only three pedals so the 'Isaacs' is on LKV.
_________________
Roger Rettig: Emmons D10, B-bender Teles and Martins - and, at last, a Gibson Super 400!
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website
dana Murphy

 

From:
clarksburg wv usa
Post  Posted 27 Jul 2018 8:15 pm     tenth string
Reply with quote

I seen a post where buddy got new zumsteel & with a 1/2 turn he could ingage or desingage the 10 string I would like see how zumtag did it hoping someone would a pix of it. I think the guitar was sold to someone in Wva but not sure sorry I was not clear in my posting I like reading the steel forum .I just don't post much thanks dana
View user's profile Send private message Send e-mail
John Goux

 

From:
California, USA
Post  Posted 27 Jul 2018 10:06 pm    
Reply with quote

I believe what Buddy was up to, was getting the Sus49 chords that were so prevalent in the 70’s and 80’s, but were not in common use during the 1950’s when the pedal steel coped was developed, as a pedals down chord.

You will recognize these as E/F#, A/B, D/E etc.

Paul Franklin did the same thing with the “Franklin pedal”, which by lowering Str 6 and 5 a whole step gives you E F# A E on strings 8/6/5/4. It’s nearly D/E.

These sus49 chords are on the E9 coped but not as easily available..
The easierst is open strings 76543, an E/F#. It is voiced pretty high. Bully for those 12 strings players who can raise low E to F#.

If you raise D string a half step in combo with A/F you can have C#/D# on 9 7654.

Most of us can’t have a A/B in pedals down because the B to C# works on string 10 as well as string 5.
Buddy had Bruce build a guitar that could have the 10th string either raised by the A pedal, or not, leaving an A triad with B in the bass.

What Dana is asking, is how did Bruce accomplish this lever? To either engage string 10 with the A pedal, or with the flip of a switch, not raise string 10.

I believe Dana’s question is a mechanical one.

John
View user's profile Send private message Send e-mail
Rich Sullivan


From:
Nelson, NH 03457
Post  Posted 28 Jul 2018 6:19 am    
Reply with quote

Roger or John,

Can you enlighten me as to the applications of the IV/V chord? When would you use that chord?

Thx
View user's profile Send private message Send e-mail
Roger Rettig


From:
Naples, FL
Post  Posted 28 Jul 2018 6:56 am    
Reply with quote

Rich

As pop music became more sophisticated through the '60s and beyond there were more and more examples of 4/5 chords. We can think of it as an 11th chord,too.

"(By the) time I get to Phoenix...."

If I'm playing the tune in E major I could use the A/B (or B11th) on the word 'time' then resolve to Ema7 (fret 2, strings 9,7,6,5 with B and C pedals).

This is one simple application on a song most of us know but there are thousands more.
_________________
Roger Rettig: Emmons D10, B-bender Teles and Martins - and, at last, a Gibson Super 400!
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website
Ron Pruter

 

From:
Arizona, USA
Post  Posted 30 Jul 2018 7:41 pm    
Reply with quote

Roger, On the word "time" my ears tell me the bass stays on a 1. According to what you're saying, the bass would go to a 5. Yes/no?

You beat me to the punch on calling them 11 chords. Love your posts. Interesting copedant. RP
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112.
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 30 Jul 2018 8:47 pm    
Reply with quote

Buddy plays an 11th (4 chord/ 5 on bass) right at the end of Shenandoah before resolving to the 1.
https://m.youtube.com/watch?v=9GllXOgF4DY
And you MUST do the look.
View user's profile Send private message Send e-mail
David Mason


From:
Cambridge, MD, USA
Post  Posted 31 Jul 2018 12:43 am    
Reply with quote

In dealing with geniuses, they can be very annoying about just, like, flaking off and doing whatever they want. It kinda seems like by the time you can write down and apply something he "did" he was already doing something else.

"Harrumph... The NERVE of that man!"

I think he may be settling down a bit and behaving a little more obediently these days, but still:

"Harrumph... The NERVE of that man!" <-<- (copy cut 'n' paste as needed, as often as it takes)
View user's profile Send private message Send e-mail
Roger Rettig


From:
Naples, FL
Post  Posted 31 Jul 2018 5:03 am    
Reply with quote

Ron

Not necessarily. On the original record the bass does play a 'one'but I feel that was a musical choice that reinforces the '11th' sound (Carol Kaye, perhaps?) The chord is a 5/11.

Now, I know that I could use my B & C pedal and play strings 10, 6 & 5 only to get the same harmonic effect but I like the tonic note on string 4.

Maybe 'Phoenix' isn't the perfect choice but I felt it was a song that everybody would know.

Fred's quite right regarding 'Shenandoah' - maybe a better choice?

Good post, David - funny how Buddy never asked anyone first if he should try these things. I'm tickled when I think of him working it all out in his head while he was grocery shopping.

The nerve of the man!!!!!
_________________
Roger Rettig: Emmons D10, B-bender Teles and Martins - and, at last, a Gibson Super 400!
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 31 Jul 2018 6:19 am    
Reply with quote

Listen to Bobbe's intro. I believe this is a 4 chord being played over a 5 in the bass.

C6 tuning, of course.

Click Here
View user's profile Send private message Send e-mail
Roger Rettig


From:
Naples, FL
Post  Posted 31 Jul 2018 6:21 am    
Reply with quote

Yes, Lee - exactly.He also is playing the tonic note at the top of the chord.
_________________
Roger Rettig: Emmons D10, B-bender Teles and Martins - and, at last, a Gibson Super 400!
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 31 Jul 2018 6:34 am    
Reply with quote

You should also note that Bobbe still has all his fingers on his left hand...before the power saw incident!

A more subtle use of the 4/5 chord can be found at the end of the intro of Alabama's song, Old Flame.
It's the last chord, just before the first vocal line.
View user's profile Send private message Send e-mail
Roger Rettig


From:
Naples, FL
Post  Posted 31 Jul 2018 6:41 am    
Reply with quote

I don't know that song, Lee, but the 11th is a powerful musical tool that can set a mood all of its own.

I've found it useful in my version of the 'Hill Street Blues' theme.

Guitarists, of course, just have to stop one fret from the 5th to the 2nd string with the bass note being the root. Piece of cake!

Glen Campbell's 'True Grit' - at the end of the bridge:

'The pain of it - will ease a bit - when you find a man with true GRIT (11th). Smile
_________________
Roger Rettig: Emmons D10, B-bender Teles and Martins - and, at last, a Gibson Super 400!
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website
Charlie McDonald


From:
out of the blue
Post  Posted 1 Aug 2018 11:57 am    
Reply with quote

In later years, Emmons was thinking of tossing his C pedal and putting the A pedal on P3. He said it was to get the contemporary IV/V chord and
he could do something else with P3. There were some laughs about his going Day.
Yes, that was the definitive IV/V in D on Shenandoah, and the look was if he at last found the lost chord. I think it is a significant change.
I also think the man from Jupiter was showing us how to do it. This is a notable chord. I don't think you can do it using a B->C# raise.

I think the change in 'By The Time..' can be played with just the B pedal. The minimal change gets that spare steel sound.

You don't want F#, it's on the melody. You don't need the D# note yet, it's not yet in the melody, which is so far E and F#.
A over B is simply the best expression as it's the simplist. It shows the meat of the modern change. You hear a lot of it in Debussy.
It's slightly different from I/V, like you'd hear in Joni Mitchell.

So where does it come from, the implicit root of E in a B chord? Carol Kaye didn't do it. It's just there, and it's the importance of the ninth and eleventh,
on their way to being bigger chords that will confound further confound notation with all the majors and minors.

Yes, I'm sure there are piano players out there, in bars in the sky that insist on playing it as an F#m7.
There may be pedal steel players that are doing it the same way; it's a time-honored tradition in America as well as England.

The E note in By The Time.. never really leaves. You hear a lot of it in the Beach Boys. In some form the notes in the treble clef stay the same and the bass moves, in its most basic form. And sometimes, vice versa.
Ditch the five of two jive, get with the one of five, because if it's there you'll here the root, I mean hear, like it's chickoree, I garontee.
If the V is there you'll hear the one in it somewhere.

You should hear this change and obey. Follow it.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron