Need Misc Derby Parts?

William Johnson · From: Statesboro, Georgia, USA

hello everyone.

i need the following Derby parts (might not use proper names) for adding a floor pedal. I thought i would ask here before contacting Derby.

(1) white large plastic/nylon bushing that goes in the L center brace. it fits in the 'U' shaped area on the L brace.

(1-3) brass locking collar with allen set screw that locks the pull rod on the bell-crank.

(1) floor pedal square cross crank shaft with allen screw for floor pedal adjustment

(1) small spring and eye screw used for the floor pedal return assistance for above part

basically all parts needed except for floor pedal, mounting bracket and floor pedal pull (rod) linkage with 'hook'.

thanks,

Billy

------------------
William Johnson (Billy)
Grievous Angel Productions
Statesboro, GA. 30461 USA
http://www.grievousangelpro.com

Derby DBS10E9
Custom BillieTele Telecaster
Peavey NV400
Peavey TubeFex
Goodrich 7A

Please 'Mouse' to see larger photo.

http://usera.imagecave.com/GreivousAngelPro/derbyfront.JPG

Summer 1969

http://usera.imagecave.com/GreivousAngelPro/Billy1969.JPG

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: