| Author |
Topic: Kline S-12 extended E9 4x5 |
Gavin Dunn
From:
Edmonton, Alberta, Canada
|
Posted 10 Apr 2018 2:26 pm |
|
Looking to get $2000 USD shipped and insured.
 |
|
|
 |
Gavin Dunn
From:
Edmonton, Alberta, Canada
|
Posted 10 Apr 2018 2:27 pm
|
|
| More pics available on request. |
|
|
|
Jon Zimmerman
From:
California, USA
|
Posted 10 Apr 2018 3:21 pm Niiiice!
|
|
| Oh Lahawdie Goosebumps! Super 😊 deal! GLWTS |
|
|
|
Gavin Dunn
From:
Edmonton, Alberta, Canada
|
Posted 10 Apr 2018 3:22 pm
|
|
| Just trying to get the cost of a new guitar. Might be spoken for already. |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 10 Apr 2018 5:57 pm
|
|
| Eye candy |
|
|
|
Jim Pitman
From:
Waterbury Ctr. VT 05677 USA
|
Posted 10 Apr 2018 7:47 pm
|
|
| You see quite a few Kline S12 universals so I have to ask, was it always an extended E9 or do you have a few other pedals and rods stashed away? |
|
|
|
Gavin Dunn
From:
Edmonton, Alberta, Canada
|
Posted 10 Apr 2018 8:10 pm
|
|
| That is a question I don’t have an answer for. I’m the third owner that I know of, and it’s been an extended E9 the whole time. Though I do have the hardware for another knee lever. It came to me as a 4x6. |
|
|
|
Randy Brown
From:
Knoxville, Tennessee, USA
|
Posted 11 Apr 2018 5:51 am
|
|
| I am interested. Email sent. |
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 11 Apr 2018 6:03 am
|
|
| Gavin Dunn wrote: |
| That is a question I don’t have an answer for. I’m the third owner that I know of, and it’s been an extended E9 the whole time. Though I do have the hardware for another knee lever. It came to me as a 4x6. |
look if there is some extra holes underneath the guitar, if there is, that means someone took some stuff out... I have never seen Kline S12 E9 ext , all 12 string Klines were U12 7+5 that I’ve seen so far...
_________________
www.steelguitarsonline.com |
|
|
|
Dave Zirbel
From:
Sebastopol, CA USA
|
Posted 11 Apr 2018 6:34 am
|
|
These are nice guitars!
_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps |
|
|
|
Alan Cook
From:
Kent,England
|
Posted 11 Apr 2018 1:25 pm
|
|
A Kline carries all the lever and pedal cross shafts on two long side rails that are pre drilled and tapped to carry existing and additional changes so there should be no holes under the guitar. The pedal bar is the same, pre drilled to except a maximum of 10 pedals I think.
Alan. |
|
|
|
Gavin Dunn
From:
Edmonton, Alberta, Canada
|
Posted 11 Apr 2018 1:32 pm
|
|
| Yes, this one can facilitate more pedals and levers, thought it’s not obvious if there had been others installed previously. To my eye it looks as though there haven’t. |
|
|
|
Jim Pitman
From:
Waterbury Ctr. VT 05677 USA
|
Posted 11 Apr 2018 1:43 pm
|
|
I want it but I don't have enough money.
(Recurring theme with me) |
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 11 Apr 2018 2:09 pm
|
|
| Alan Cook wrote: |
A Kline carries all the lever and pedal cross shafts on two long side rails that are pre drilled and tapped to carry existing and additional changes so there should be no holes under the guitar. The pedal bar is the same, pre drilled to except a maximum of 10 pedals I think.
Alan. |
that is correct, so I guess there is no way to figure it out if it ever was U12 or not, at least not by some extra holes in the cabinet, you may be able to tell by some other signs, but I'm no Kline expert, so I don't know.... maybe by serial number, if there is a model of the guitar a part of the serial number...
_________________
www.steelguitarsonline.com |
|
|
|
Gavin Dunn
From:
Edmonton, Alberta, Canada
|
Posted 11 Apr 2018 2:58 pm
|
|
Sold, thanks everyone for your interest.  |
|
|
|
