| Author |
Topic: Wtb/psg |
Jerry Dragon
From:
Gate City Va.
|
Posted 26 Jan 2018 9:26 am |
|
I am looking to buy either an S10 or SD10, 3x4, Emmons set up. I have two grand to spend and that would have to include the shipping. Cosmetics not that important, playablity is. Anything out there?
Thanx
Jerry |
|
|
 |
Daniel Haymore
From:
Nashville, TN
|
|
|
|
Keith Bolog
From:
Wisconsin, USA
|
Posted 26 Jan 2018 11:55 am ..
|
|
you are about to get buried in private messages and emails......
_________________
Sustainability is unsustainable |
|
|
|
Jerry Dragon
From:
Gate City Va.
|
Posted 27 Jan 2018 3:29 am Re: ..
|
|
| Keith Bolog wrote: |
| you are about to get buried in private messages and emails...... |
I have received very few so far, four to be exact, with one of them more than I can spend, would like to see more. Strange, you say you have x amount to spend and you get offers of guitars costing more? I am not fond of black or red which could rule out many. |
|
|
|
Jerry Dragon
From:
Gate City Va.
|
Posted 27 Jan 2018 3:31 am
|
|
more than I can spend |
|
|
|
Jerry Dragon
From:
Gate City Va.
|
Posted 2 Feb 2018 9:28 am Re: ..
|
|
| Keith Bolog wrote: |
| you are about to get buried in private messages and emails...... |
your prediction has not come to fruition, I have received not other emails etc. since the first four. |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 2 Feb 2018 10:22 pm
|
|
Jerry, I have a black BMI 3+3 (sold).
_________________
http://www.littleoprey.org/
Last edited by Jerry Roller on 20 Feb 2018 5:53 pm; edited 1 time in total |
|
|
|
Ron Hogan
From:
Nashville, TN, usa
|
|
|
|
David Mitchell
From:
Tyler, Texas
|
Posted 7 Feb 2018 12:48 pm
|
|
I'll sell you this one I am playing here that Junior Knight and I built last week.
It wails and cries better than any steel I've built or played. It is basically a welded frame EMCI D-10 3 & 4 with EMCI adjustable cross shafts, various makes of bell cranks with only the E9th gear installed but it's different from an EMCI because I mounted the hardware directly to the board and didn't Formica it. I also used a shellac base coat with a thin coat of lacquer over that. The Keyhead and the pedal board are Carter parts.
The strings slope downward toward the nut like any other stringed instrument about 1/4". You don't notice it while playing. I don't know why steel guitar makers think the strings have to be straight with the fretboard. Like on a violin the higher the bridge the more powerful the tone gets. I know it's hard to Buck conventional thinking so I want bog your mind on that. Anyway for $2,000.00 including shipping in a real steel guitar flight case for airline travel that says Junior stenciled on it you'll have an axe that really sings. Not very pretty but most great guitars are not pretty. You'll have to go to the Facebook app to listen to it ungarbled. From this link it sounds like it's been ran through a meat grinder. Just playing through a session 500 with no effects but a pinch of amp spring reverb.
https://www.facebook.com/groups/basilsteelguitartoday/permalink/996619903828200/ |
|
|
|
Jerry Dragon
From:
Gate City Va.
|
Posted 8 Feb 2018 6:40 am
|
|
I am waiting to see if I am going to buy a Jackson this weekend. If it falls through I will be looking at all the guitars offered.
Thank You All
Jerry |
|
|
|
Jerry Dragon
From:
Gate City Va.
|
Posted 10 Feb 2018 2:34 am
|
|
| Well, that one fell through. I have less than I thought, I only have 1500.00. |
|
|
|
Rick Cantrell
From:
Dandridge ,TN
|
Posted 11 Feb 2018 1:40 pm s10
|
|
I have a really nice S10 Sierra black 3x3, contact me if you want some photos
_________________
pedal steel/fiddle/guitar some keyboard |
|
|
|
Jerry Dragon
From:
Gate City Va.
|
Posted 12 Feb 2018 1:08 am
|
|
| I am negotiating having one built for me. |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
|
|
|
