Author |
Topic: Mullen Parts |
Mickey Adams
From: Bandera Texas
|
Posted 22 Jan 2018 8:33 am
|
|
I have massive stores of Mullen parts...
Please let me know own what you need..! _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Paul Brainard
From: Portland OR
|
Posted 22 Jan 2018 11:26 am parts
|
|
Hey Mickey do you have any of their VKL extenders? And, do you think they can be made to work on a Fessenden? Looks like they might, similar design although the thickness of the "blade" sandwiched inside the joint looks different. . .thanks!
ps you don't happen to have any spare Williams knee levers do you? Just the lever. . . |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 22 Jan 2018 11:55 am
|
|
Thats one part I do not have sorry.. _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Donald Wright
From: California, USA
|
Posted 22 Jan 2018 1:16 pm Mullen parts
|
|
Hey Mickey,
I have two D10 Mullens, one 1989 PRP and one 2013 RP.
I would like to add a center knee lever for the C6 neck on one or both guitars. I would need the knee lever, cross shaft with bushings, bell crank and pull rod. I think the cross shaft and the corresponding bell crank on the 2013 RP is a larger diameter than the PRP. I have a few extra pull rods if you don't.
Let me know.
Thanks,
Don |
|
|
|
Jason Putnam
From: Tennessee, USA
|
Posted 22 Jan 2018 5:32 pm
|
|
Half stop mechanism???? _________________ 1967 Emmons Bolt On, 1995 Mullen PRP 3x5,Nashville 112, JOYO Digital Delay, Goodrich Volume Pedal, Livesteel Strings |
|
|
|
Jerry Roller
From: Van Buren, Arkansas USA
|
Posted 22 Jan 2018 8:59 pm
|
|
Edited. _________________ http://www.littleoprey.org/
Last edited by Jerry Roller on 2 Mar 2018 9:00 am; edited 1 time in total |
|
|
|
Jon Light
From: Saugerties, NY
|
Posted 23 Jan 2018 4:34 am Re: parts
|
|
Paul Brainard wrote: |
.......VKL extenders? And, do you think they can be made to work on a Fessenden?.......... |
This design is great. I asked Mullen this exact question a couple of years ago and....no. Will not fit a Fess. |
|
|
|
Tom Mooney
From: Arlington, TN, USA
|
Posted 25 Jan 2018 4:13 am Parts
|
|
Do you have the stuff to add a 4th floor pedal to my Royal Precision? |
|
|
|
Wilfred Buttigieg
From: Malta
|
Posted 26 Jan 2018 12:58 am Parts for Royal Precision
|
|
I am also interested in adding a fourth pedal to my Royal Precision.
Do you have the necessary parts please? |
|
|
|
Lee Bartram
From: Sparta, Kentucky, USA
|
Posted 1 Mar 2018 4:10 am
|
|
Mickey I sent you a PM.. |
|
|
|
DG Whitley
|
Posted 1 Mar 2018 6:32 am
|
|
As Jason mentioned, any half stop assemblies? |
|
|
|
Alan Michael
From: Winston-Salem North Carolina U.S.A.
|
Posted 13 Mar 2018 9:03 am
|
|
PM sent. Looking for a Mullen narrow mount pickup. |
|
|
|
Steven Meister
From: California, USA
|
Posted 20 Oct 2018 8:26 pm
|
|
PM sent |
|
|
|
Mickey Adams
From: Bandera Texas
|
Posted 22 Oct 2018 10:54 pm
|
|
Ill check stock for all of these today..
NO RP parts....I didn't service many at all... _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|