| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic the Dunning-Kruger effect
Goto page 1, 2  Next
Reply to topic
Author Topic:  the Dunning-Kruger effect
Stuart Legg


Post  Posted 13 Jan 2018 7:52 am    
Reply with quote

Pedal Steel guitar players are ate up with the Dunning-Kruger effect.
They put strings on a bucket of bolts, stomp on squeaky pedals, tune up in different +/- cents on any given day and then pretend that everyone in the band is out of tune but them. You gotta love em!
View user's profile Send private message
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 13 Jan 2018 8:07 am    
Reply with quote

I don't really know what that is.
I just hope it has nothing to do with the fact that I am an amazing person...
View user's profile Send private message Send e-mail
Paul Arntson


From:
Washington, USA
Post  Posted 13 Jan 2018 8:34 am    
Reply with quote

LMAO. Gotta find a way to weave it into a conversation.
Funny wikipedia article about this effect.
_________________
Excel D10 8&4, Supro 8, Regal resonator, Peavey Powerslide, homemade lap 12(a work in progress)
View user's profile Send private message Send e-mail
Barry Blackwood


Post  Posted 13 Jan 2018 10:47 am    
Reply with quote

I owe my career to the DK Effect.. Shocked
View user's profile Send private message Send e-mail
Ken Campbell

 

From:
Ferndale, Montana
Post  Posted 13 Jan 2018 11:07 am    
Reply with quote

I was one of the original test subjects.
View user's profile Send private message Send e-mail
Greg Cutshaw


From:
Corry, PA, USA
Post  Posted 13 Jan 2018 11:32 am    
Reply with quote

https://en.wikipedia.org/wiki/Dunning%E2%80%93Kruger_effect
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 13 Jan 2018 11:40 am    
Reply with quote

Quote:
In the field of psychology, the Dunning–Kruger effect is a cognitive bias wherein people of low ability suffer from illusory superiority, mistakenly assessing their cognitive ability as greater than it is.


I'm not quite sure that all of that applies to most pedal steelers. However, I do think it's ill-advised for people with zero mechanical ability and aptitude to take up what is, arguably, the most mechanically complex musical instrument still in current use.

As my old man would say..."If you can't swim, don't buy a canoe". Laughing
View user's profile Send private message Send e-mail
Stuart Legg


Post  Posted 15 Jan 2018 2:15 pm    
Reply with quote

According to Dunning–Kruger effect highly competent individuals may erroneously presume that tasks easy for them to perform are also easy for other people to perform, or that other people will have a similar understanding of subjects that they themselves are well-versed in.
This is my point, I don’t see a lot of Steel players assuming non-steel players have a similar understanding of subjects that they themselves are well-versed in, on a whole range of matters including tuning.
View user's profile Send private message
Glenn Demichele


From:
(20mi N of) Chicago Illinois, USA
Post  Posted 15 Jan 2018 3:22 pm    
Reply with quote

Fascinating: I had never read that before.
I'm and engineer, and I have a personal philosophy which is similar, and it has on occasion saved me from me from making stupid mistakes:
On a day I feel smart, I'm actually dumb (because dumb things seem smart to a dumb person). And vice-versa, but that flip-side isn't so dangerous because even if the dumb thought was brilliant, I am less likely to forge ahead blindly because it seems dumb at the time.

Ideas that seem like good ideas at the time are the dangerous ones, like dynamiting the whale carcass or power washing your changer.
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc...
View user's profile Send private message Send e-mail
Mark van Allen


From:
Watkinsville, Ga. USA
Post  Posted 16 Jan 2018 6:48 am    
Reply with quote

Along my playing/ learning pathway I met a good number of musicians who would rip off a string of something-or-other in answer to a musical question that would seem to be either a passive-aggressive way of keeping their chops to themselves, or an assumption that I could simply do anything they could... conversely, I gave a first lesson once to a dentist who showed up with a whole rig and the somewhat arrogant pronouncement that pedal steel couldn’t be that hard after dental school. We spent 3-4 hours going over the basics of the tuning and playing fundamentals, laying a out a practice regimen and so on. After loading up he came back in from his car and said he just didn’t think he’d have time after all to master “this thing”. At the conclusion of the conversation I ended up with a new Mullen D10 for a grand.
_________________
Stop by the Steel Store at: www.markvanallen.com
www.musicfarmstudio.com
View user's profile Send private message Send e-mail Visit poster's website
Fred Treece


From:
California, USA
Post  Posted 16 Jan 2018 9:16 am    
Reply with quote

Great story, Mark Laughing
View user's profile Send private message Send e-mail
Mark van Allen


From:
Watkinsville, Ga. USA
Post  Posted 16 Jan 2018 1:20 pm    
Reply with quote

It was great for me, anyway. I believe that Mullen ended up in Japan. I was sorry for the dentist, mostly because he seemed to reject the idea that something that would take him some concentrated time and effort couldn't be… fun.
_________________
Stop by the Steel Store at: www.markvanallen.com
www.musicfarmstudio.com
View user's profile Send private message Send e-mail Visit poster's website
Fred Treece


From:
California, USA
Post  Posted 16 Jan 2018 5:04 pm    
Reply with quote

Mark van Allen wrote:
It was great for me, anyway. I believe that Mullen ended up in Japan. I was sorry for the dentist, mostly because he seemed to reject the idea that something that would take him some concentrated time and effort couldn't be… fun.

On the other hand, it is possible (even likely) that he is a better dentist/husband/father for having made the decision.
View user's profile Send private message Send e-mail
Charlie McDonald


From:
out of the blue
Post  Posted 17 Jan 2018 6:35 am    
Reply with quote

Perhaps he has reached the Peter Principle.
View user's profile Send private message Send e-mail
Barry Blackwood


Post  Posted 17 Jan 2018 10:37 am    
Reply with quote

The Peter Principal! Indeed!
View user's profile Send private message Send e-mail
Bill Bassett

 

From:
Papamoa New Zealand
Post  Posted 18 Jan 2018 6:01 am    
Reply with quote

I have learned to assume nothing. Like, sometimes I'm invited to play with a friend as a duo, guitar and steel. While I can see and hear what he plays on guitar and can follow easily, he has no clue what I'm doing on steel. So, I spend a fun evening following along. All it takes is lower expectations and a resistance to assumptions.
View user's profile Send private message Send e-mail
Charlie McDonald


From:
out of the blue
Post  Posted 18 Jan 2018 12:31 pm    
Reply with quote

It could be that the Dunning-Kruger effect is an advantage for steel players. No one else knows what's going on with steel.
It is an instrument that is easy to reach the level of your incompetence.
View user's profile Send private message Send e-mail
Brint Hannay

 

From:
Maryland, USA
Post  Posted 18 Jan 2018 5:44 pm    
Reply with quote

Donny Hinson wrote:
Quote:
In the field of psychology, the Dunning–Kruger effect is a cognitive bias wherein people of low ability suffer from illusory superiority, mistakenly assessing their cognitive ability as greater than it is.


I'm not quite sure that all of that applies to most pedal steelers.

Charlie McDonald wrote:
It could be that the Dunning-Kruger effect is an advantage for steel players. No one else knows what's going on with steel.

I'm with Charlie: Certainly in my case it's other people assessing my cognitive ability as greater than it is.

Audience member: "How long did it take you to learn to play that thing?"
Me: "If I ever do, I'll let you know then." Mr. Green
View user's profile Send private message Send e-mail
Don R Brown


From:
Rochester, New York, USA
Post  Posted 19 Jan 2018 6:34 am    
Reply with quote

Charlie McDonald wrote:
It could be that the Dunning-Kruger effect is an advantage for steel players. No one else knows what's going on with steel.
It is an instrument that is easy to reach the level of your incompetence.


Charlie, I must be a much greater player than I thought, because I've been incompetent on this contraption since the first time I sat down with it! Laughing
_________________
Many play better than I do. Nobody has more fun.
View user's profile Send private message Send e-mail
Rick Schmidt


From:
Prescott AZ, USA
Post  Posted 20 Jan 2018 11:55 am    
Reply with quote

I've always maintained that EVERYBODY that has anything to do with music...i.e. musicians, singers, agents, producers, promoters, vendors, etc., can all be evaluated numerically with what I call M.C.U's, or "Musical Clulessness Units" Winking
In my opinion, to do any of these things, you have to be somewhere on this spectrum to get anything at all accomplished in music. Some people who have high numbers of MCUs (i.e. "clueless") are able to accomplish great things because of their lack of objective self image. Others? Not so much...
Just go to a NAMM show, and you'll see what I mean. Rolling Eyes
View user's profile Send private message Send e-mail
Fred Treece


From:
California, USA
Post  Posted 20 Jan 2018 12:18 pm    
Reply with quote

Rick Schmidt wrote:
I've always maintained that EVERYBODY that has anything to do with music...i.e. musicians, singers, agents, producers, promoters, vendors, etc., can all be evaluated numerically with what I call M.C.U's, or "Musical Clulessness Units" Winking
In my opinion, to do any of these things, you have to be somewhere on this spectrum to get anything at all accomplished in music. Some people who have high numbers of MCUs (i.e. "clueless") are able to accomplish great things because of their lack of objective self image. Others? Not so much...
Just go to a NAMM show, and you'll see what I mean. Rolling Eyes

This is great! But...you left out the audience. Though they are not out to accomplish anything in music, the MCU count is pretty high amongst our adoring multitudes, and this contributes greatly to the relative success of the performer who may also be at the upper end of the scale.

On the other hand, without an audience, educated or otherwise, where would any of us be? Gotta give ‘em the best of our incompetence, no matter what.
View user's profile Send private message Send e-mail
Charlie McDonald


From:
out of the blue
Post  Posted 20 Jan 2018 12:34 pm    
Reply with quote

Fred's last sentence is, like, the bottom line. I've gained a lot of MCU's from being on the forum,
but for someone who has never been prepared, you give them the level of your incompetence every night. Cool
View user's profile Send private message Send e-mail
Ray Minich

 

From:
Bradford, Pa. Frozen Tundra
Post  Posted 26 Jan 2018 5:19 pm    
Reply with quote

Brint, your post made me laugh like hell... Very Happy
_________________
Lawyers are done: Emmons SD-10, 3 Dekleys including a D10, NV400, and lots of effects units to cover my clams...
View user's profile Send private message Send e-mail
b0b


From:
Cloverdale, CA, USA
Post  Posted 26 Jan 2018 6:36 pm    
Reply with quote

I took up steel because I was a lousy guitarist, and I noticed that lousy steel players were getting work. Whoa!
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website
Bill C. Buntin

 

Post  Posted 27 Jan 2018 6:45 am    
Reply with quote

Rick Schmidt wrote:
I've always maintained that EVERYBODY that has anything to do with music...i.e. musicians, singers, agents, producers, promoters, vendors, etc., can all be evaluated numerically with what I call M.C.U's, or "Musical Clulessness Units" Winking
In my opinion, to do any of these things, you have to be somewhere on this spectrum to get anything at all accomplished in music. Some people who have high numbers of MCUs (i.e. "clueless") are able to accomplish great things because of their lack of objective self image. Others? Not so much...
Just go to a NAMM show, and you'll see what I mean. Rolling Eyes


Rick this is the funniest thing I've ever read. I've always thought this but never had the ability to articulate it the way you have here. Very Happy

Now comes the task of a standard of measure, such as What is one MCU worth, like a BTU is defined. One MCU is like what? Recognizes 5 chord sometimes? Or thinks that "Bad to the Bone" has a lot of changes?? This is some funny stuff.

~Bill~
View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron