| Author |
Topic: Emmons fretboards, pedal bar stickers, tuning nuts |
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 23 Mar 2017 3:06 pm |
|
These fretboards are produced by Tom Bradshaw. They are available in black with white lines or white with black lines, both styles have the colored fret markers. Mr Bradshaw would like to know if there is enough demand for 12 string boards so if you have such a need please let me know. He will produce them if there is enough need. If you need fretboards for your Emmons please email me at rollermusic@cox.net
These beautiful boards have adhesive on back and Tom has produced an Installation Instruction that will be included with each purchase.
Tuning nuts 60 for $23.50 free postage. Red tuning nuts can be substituted in limited numbers @ .10 each additional. They are great for compensator identification.
Check it all out closely, you might miss something!
Thanks
Jerry
_________________
http://www.littleoprey.org/
Last edited by Jerry Roller on 25 Feb 2019 6:25 pm; edited 20 times in total |
|
|
 |
Jim Smith
From:
Midlothian, TX, USA
|
Posted 23 Mar 2017 3:36 pm
|
|
| I posted in Tom's thread that I would like to see him make 12 string Emmons fretboards. I still have one new set that I haven't put on yet, but they were ridiculously expensive from Emmons. |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 23 Mar 2017 6:44 pm
|
|
Jim, if we come up with at least 30 needs for 12 string boards Tom will have a supply of them made at a price of $29.00 each. I have 10 string boards in stock and hopefully the demand will be enough that we can provide 12 string boards. I can remember you needing them over 10 years ago and I wad unable to provide them. Can I put you down for two 12 string boards?
Thanks,
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 24 Mar 2017 9:43 am
|
|
Jerry, I wish I could say yes, but the fretboards I have on now are still "acceptable" and my spare set are perfect NOS. I think they'll last longer than I will.  |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 25 Mar 2017 10:53 am
|
|
Jim, good to hear from you. It's been too long since I got to meet and visit with you at the Texas show. I hope all is well with you. Let me know if you should decide that you would like some 12 string boards. They are very reasonably priced.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 30 Apr 2017 5:33 pm Fretboards
|
|
Great looking fretboards. If your Emmons has worn boards these can really spruce it up. I also have a few pedal board stickers for Emmons.
_________________
http://www.littleoprey.org/ |
|
|
|
Mike Scaggs
From:
Nashville, TN
|
Posted 30 Apr 2017 6:08 pm .
|
|
Are these metal boards and screen printed like the originals? If so what is the thickness please
Mike
_________________
I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 30 Apr 2017 6:38 pm
|
|
Mike, they are printed on Lexan, appear to be same thickness as original boards. I just put a pair on a SKH for a customer and they look just like the original boards on the guitar.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Jack Strayhorn
From:
Winston-Salem, NC
|
Posted 2 May 2017 7:49 am
|
|
| I may be needing a 12 string board! |
|
|
|
Ron Pruter
From:
Arizona, USA
|
Posted 3 May 2017 1:05 pm
|
|
Hi Jerry,
According to Tom's web page, his FB's measure 3.5" at the 24th fret. Mine is only 3 3/8" at the very end. If you remember, I have Rex Blevens, blue SKH and it seems to me the FB can't be any wider. I'm already to the edge of the finger board. Can you check and post the measurements of your Emmons fretboard for me? Thx Ron
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 3 May 2017 2:23 pm
|
|
Ron, here are photos of a SKH that I am just finishing rebuilding. The fretboards are the Tom Bradshaw boards. Perfect fit and look like originals. Perfect in every way.
_________________
http://www.littleoprey.org/ |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 15 Aug 2017 11:25 am
|
|
TTT, I know there are a lot of Emmons guitars that could use these nice new fretboards.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Dan Wistrom
From:
California, USA
|
Posted 13 Sep 2017 12:16 pm count me in
|
|
| I could definitely use (2) 12 string fretboards myself. I was asking about them a year ago and couldn't find any. |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 13 Sep 2017 1:17 pm
|
|
Dan, if we could come up with orders for 30 twelve string boards it would be feasable for Mr Bradshaw to have the artwork set up to make them. So, if anyone would like one or more twelve string boards please let us know here. I can't list price here but I can tell you price would be same as the ten string and very reasonable. Email me for price if interested.
Thanks,
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 23 Dec 2017 2:16 pm Emmons guys listen (look) up!
|
|
I have new fretboards for Emmons guitars: $29.00 each
A few pedalboard stickers for Emmons: @$10.00 each shipped.
I have 60 new nylon tuners for Emmons LeGrande, II or III: $23.50 shipped within 48 States.
Jerry
_________________
http://www.littleoprey.org/
Last edited by Jerry Roller on 19 Mar 2018 9:42 pm; edited 3 times in total |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 24 Dec 2017 6:48 pm
|
|
I have an '82 Emmons S12U PP here but it has the silver-background fretboard.
You can put me down for a 12-string fretboard, though.
I may need one someday. |
|
|
|
Bill Ferguson
From:
Milton, FL USA
|
Posted 25 Dec 2017 9:40 am Emmons Tuners
|
|
Jerry, I will take the 50 Emmons Tuners for my 93 LeGrande.
Will send you a pm.
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Ron Funk
From:
Ballwin, Missouri
|
Posted 25 Dec 2017 10:24 am Pedal Board decals
|
|
Jerry
I could use two Emmons pedal board stickers.
Please send me email with instructions for payment.
I can do PayPal.
Thanks. |
|
|
|
Bobby Boggs
From:
Upstate SC.
|
Posted 25 Dec 2017 5:05 pm
|
|
At those prices I almost wish I needed parts. Been saying it for years. No better person or vendor to deal with than Jerry. Also and excellent pedal steel guitar tech and repair man. And did I mention his prices are always more then reasonable? This includes instruments and amps he sometimes offers for sale.
b. |
|
|
|
Larry Hopkins
From:
Lubbock Texas USA
|
Posted 26 Dec 2017 8:57 am Fret boards
|
|
Could you post a pic of the white boards ,thanks
LH
_________________
,peavey renown 115,Vegas 400, Peavey envoy, peavy bandit 65 head,baby bloomer
2 -Nashville 400, Emmons SD-10 legrande lll ,Emmons Black Rock ,sho-bud pac a seat,,Jackson Madison 63; |
|
|
|
Tommy Auldridge
From:
Maryland, USA
|
Posted 26 Dec 2017 9:05 am Is white available?
|
|
| Are they available in white with black fret lines? I'd like to try try those. Thanks, Tommy...... |
|
|
|
