| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Lacquer Emmons Project #3 (Brownie) Phase 2 - Assembly
Goto page 1, 2, 3  Next
Reply to topic
Author Topic:  Lacquer Emmons Project #3 (Brownie) Phase 2 - Assembly
Mike Scaggs


From:
Nashville, TN
Post  Posted 1 Sep 2017 6:16 am    
Reply with quote

Guys,

Here is a preview of my upcoming early 70s Lacquer, metal neck resto.

This guitar belonged to Hubert Brown better known as Brownie. He is the original owner and bought it from the Music Box in Sacramento, CA many years ago. Brownie was not only a great player but he was the closest thing to Ralph Mooney you ever heard. He was humble and the nicest guy you can ever come to know.

When I was a young gun learning steel guitar in the Sacramento Brownie was considered one of the best in the area. He along with Jim Gray, Kenny Yates, Jimmy Fox, Jay Riley, a Young Chris Ivy, and many others were among my first strong influences and are in many ways responsible for my interest in the pedal steel guitar.

I am honored to have the opportunity to revive this old guitar and make her sing once again. This one will be a keeper for me guys so she will not be for sale.











_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com


Last edited by Mike Scaggs on 14 Oct 2017 9:18 am; edited 2 times in total
View user's profile Send private message Send e-mail Visit poster's website
Stan Schober


From:
Cahokia, Illinois, USA
Post  Posted 1 Sep 2017 10:34 am    
Reply with quote

SHe's a beauty !

E9 on the back neck with 6-7-8- set up as your ABCs ?
_________________
Emmons S-8 P/P,DeArmond 40. Slowly drifting back towards sanity.
View user's profile Send private message Send e-mail
Mike Scaggs


From:
Nashville, TN
Post  Posted 1 Sep 2017 10:36 am    
Reply with quote

Stan Schober wrote:
SHe's a beauty !

E9 on the back neck with 6-7-8- set up as your ABCs ?


Nope, it will be setup standard with the E9th upfront
_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Tony Glassman


From:
The Great Northwest
Post  Posted 1 Sep 2017 11:27 am    
Reply with quote

Are you going to keep it blonde?
View user's profile Send private message
Mike Scaggs


From:
Nashville, TN
Post  Posted 1 Sep 2017 11:51 am    
Reply with quote

Tony Glassman wrote:
Are you going to keep it blonde?


Don't think so...
_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Don Mogle

 

From:
Round Rock, TX, USA
Post  Posted 1 Sep 2017 6:00 pm    
Reply with quote

Mike,

I'd like to see this in a nice sunburst. I'm sure there are some nice examples here on the Forum. If I can find any I like, I will post them for sampling purposes. OK...I found a previous post. I really like the Zum on this post.

http://bb.steelguitarforum.com/viewtopic.php?t=308188&highlight=show++sunburst+guitars



Please forgive my recommendations on YOUR guitar, but thought I'd weigh-in on it. Regardless, I'm sure it will be another spectacular restoration. Looking forward to seeing the progression. Keep us posted on the progress.

Don
View user's profile Send private message Send e-mail
Stan Schober


From:
Cahokia, Illinois, USA
Post  Posted 1 Sep 2017 6:43 pm    
Reply with quote

Mike Scaggs wrote:
Stan Schober wrote:
SHe's a beauty !

E9 on the back neck with 6-7-8- set up as your ABCs ?


Nope, it will be setup standard with the E9th upfront


I was asking if that's what it is currently.
_________________
Emmons S-8 P/P,DeArmond 40. Slowly drifting back towards sanity.
View user's profile Send private message Send e-mail
Mike Scaggs


From:
Nashville, TN
Post  Posted 1 Sep 2017 7:54 pm    
Reply with quote

Stan Schober wrote:
Mike Scaggs wrote:
Stan Schober wrote:
SHe's a beauty !

E9 on the back neck with 6-7-8- set up as your ABCs ?


Nope, it will be setup standard with the E9th upfront


I was asking if that's what it is currently.


It's a faded 44 years of some color LOL... It may have been red at one time. Soon as I get the necks off we will all know
_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Mike Scaggs


From:
Nashville, TN
Post  Posted 1 Sep 2017 7:56 pm    
Reply with quote

Don Mogle wrote:
Mike,

I'd like to see this in a nice sunburst. I'm sure there are some nice examples here on the Forum. If I can find any I like, I will post them for sampling purposes. OK...I found a previous post. I really like the Zum on this post.

http://bb.steelguitarforum.com/viewtopic.php?t=308188&highlight=show++sunburst+guitars



Please forgive my recommendations on YOUR guitar, but thought I'd weigh-in on it. Regardless, I'm sure it will be another spectacular restoration. Looking forward to seeing the progression. Keep us posted on the progress.

Don


I'm seriously looking at this color



_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
J R Rose

 

From:
Keota, Oklahoma, USA
Post  Posted 1 Sep 2017 7:57 pm    
Reply with quote

GOOD ON YOU MIKE. KEEP US POSTED ON PROGRESS. J.R.
_________________
NOTHING..Sold it all. J.R. Rose
View user's profile Send private message Send e-mail
Don Mogle

 

From:
Round Rock, TX, USA
Post  Posted 1 Sep 2017 8:13 pm     Brownie
Reply with quote

The coloring scheme on the Show Pro looks great Mike! Love that one too!

Don
View user's profile Send private message Send e-mail
Will Houston

 

From:
Tempe, Az
Post  Posted 2 Sep 2017 10:24 pm    
Reply with quote

The Sho Pro is amazing, you wouldn't go wrong with that color scheme.
View user's profile Send private message Send e-mail
Mike Scaggs


From:
Nashville, TN
Post  Posted 9 Sep 2017 7:04 am    
Reply with quote

Ok, it's now started









_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Henry Matthews


From:
Texarkana, Ark USA
Post  Posted 9 Sep 2017 8:36 am    
Reply with quote

Mike, do you go back with the same screw holes on everything? Does the flocking cover them up or do you mark them some way like with a peg or something when you put on flocking. Just curious, you really do a great job.
_________________
Henry Matthews

D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
View user's profile Send private message Send e-mail
Mike Scaggs


From:
Nashville, TN
Post  Posted 9 Sep 2017 9:32 am    
Reply with quote

Henry Matthews wrote:
Mike, do you go back with the same screw holes on everything? Does the flocking cover them up or do you mark them some way like with a peg or something when you put on flocking. Just curious, you really do a great job.


I like plugging the holes with maple dowels. That way I have fresh tight wood for the new screws. I never use the old screws and exact replacements are very easy to find. Same with the springs. I am after consistency with what I am doing.
_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Mike Scaggs


From:
Nashville, TN
Post  Posted 9 Sep 2017 9:36 am    
Reply with quote

Getting things ready for Bud's polishing and the long hours of cleaning and polishing each bell crank and cross shaft.




_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Henry Matthews


From:
Texarkana, Ark USA
Post  Posted 9 Sep 2017 9:46 am    
Reply with quote

Mike Scaggs wrote:
Henry Matthews wrote:
Mike, do you go back with the same screw holes on everything? Does the flocking cover them up or do you mark them some way like with a peg or something when you put on flocking. Just curious, you really do a great job.


I like plugging the holes with maple dowels. That way I have fresh tight wood for the new screws. I never use the old screws and exact replacements are very easy to find. Same with the springs. I am after consistency with what I am doing.


Good idea Mike and I noticed you going back with Phillips screws instead of those awful slotted screws. Hate those things. Your work is awesome.
_________________
Henry Matthews

D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
View user's profile Send private message Send e-mail
Mike Scaggs


From:
Nashville, TN
Post  Posted 9 Sep 2017 9:55 am    
Reply with quote

Henry Matthews wrote:
Mike Scaggs wrote:
Henry Matthews wrote:
Mike, do you go back with the same screw holes on everything? Does the flocking cover them up or do you mark them some way like with a peg or something when you put on flocking. Just curious, you really do a great job.


I like plugging the holes with maple dowels. That way I have fresh tight wood for the new screws. I never use the old screws and exact replacements are very easy to find. Same with the springs. I am after consistency with what I am doing.


Good idea Mike and I noticed you going back with Phillips screws instead of those awful slotted screws. Hate those things. Your work is awesome.


Well actually I use slot head like the orig screws. What ever the original was is what I replace with and I really don't have a bit of trouble with slot heads. Neck screws and keyhead screws are phillips and I normally end up re-using those. All the tuning cap screws, pedal stop cap screws are replaced.
_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 9 Sep 2017 9:31 pm    
Reply with quote

I’ve enjoyed watching how you do this from start to finish on the other two... would really be fun to watch a video of the whole process... Incredible work Mike
_________________
Dale Rottacker, Steelinatune™
https://www.youtube.com/@steelinatune
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website
Mike Scaggs


From:
Nashville, TN
Post  Posted 10 Sep 2017 4:05 am    
Reply with quote

Dale Rottacker wrote:
I’ve enjoyed watching how you do this from start to finish on the other two... would really be fun to watch a video of the whole process... Incredible work Mike


Ok, so here is a short 3 minute video clip of what I have so far.

https://www.youtube.com/watch?v=eJEfZPxhRqY&feature=youtu.be
_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Ken Byng


From:
Southampton, England
Post  Posted 10 Sep 2017 5:01 am    
Reply with quote

Good luck with your special keeper Mike. It's going to look a real stunner in sunburst. I had my old brown Sho~Bud Pro 111 restored to a sunburst finish, and she looked a real treat afterwards.



_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,
View user's profile Send private message Send e-mail
Mike Scaggs


From:
Nashville, TN
Post  Posted 10 Sep 2017 5:16 am    
Reply with quote

Ken Byng wrote:
Good luck with your special keeper Mike. It's going to look a real stunner in sunburst. I had my old brown Sho~Bud Pro 111 restored to a sunburst finish, and she looked a real treat afterwards.


Love it Ken
_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Mike Scaggs


From:
Nashville, TN
Post  Posted 10 Sep 2017 6:33 am    
Reply with quote

So even if you don't have a crack (which they usually do on lacquers) I do this as a safety.... Beechwood biscuits slotted in the end. Makes em stronger.



_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Ken Byng


From:
Southampton, England
Post  Posted 10 Sep 2017 6:53 am    
Reply with quote

I only ever had one guitar that had the dreaded crack behind the changer, and that was a Sho~Bud LDG. That is a great idea Mike.
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,
View user's profile Send private message Send e-mail
Mike Scaggs


From:
Nashville, TN
Post  Posted 10 Sep 2017 7:20 am    
Reply with quote

Here is a quick video showing the way I do it.

https://www.youtube.com/watch?v=MKCu4dGOj8Y&feature=youtu.be
_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron