| Author |
Topic: Pedal Dobro S9 with 6+6 |
Thiel Hatt
From:
Utah, USA
|
Posted 19 Jul 2017 6:40 am |
|
I have had this one on the Forum previously but withdrew the the entry because I decided to keep it. I have enjoyed the instrument and found it difficult to let it go, but have come to the decision to put it on the market again. Here is a description of it:
1. The changer is an EMCI and is a triple raise/ triple lower all pull system. So naturally the string spacing is the same as the standard pedal steel. It is modified to accomodate nine strings. The changer is located on the left end of the instrument. This was done to allow room to accomodate the full depth of the sound chamber without interfering with the under-carriage. Thus the string spacing is the same at both the nut and bridge.
2. The pull fingers on the cross rods are from Fessenden.
3. The pickup is a Fishman which attaches to the bottom of the resonator cone.
4. The tunners are the simple keyless type, located on the right end of the guitar.
5. The copedent is D9th with the two chromatic strings on top like the standard E9th. I have is set up as a universal tuning so with the D's lowered is becomes an A6th. Three of the pedals are for the D9th mode and three for the A6th. It has six knee levers. (Two verticles, one of which is located to work with the A6th mode)
6.The tonal quality is as good as any Dobro I have compared it to
7. The pedal action is smooth and positive
8.Stays in tune very well and is very stable
9. It has a device to lock the D lowers for the A6th mode
I am asking $ 1900.00 for the instrument and it comes with a case.
 |
|
|
 |
Arlan Schierbaum
From:
Greece ~ Europe
|
Posted 19 Jul 2017 2:21 pm ..sent you PM and email
|
|
please get in touch when you have a moment ~ thank you ~ Arlan
_________________
ZumSteel D101197650 (lacquer/wood necks) ~ Fender, Vox, Mesa Boogie ~ Ernie Ball, TC Electronics, Jim Dunlop |
|
|
|
Thiel Hatt
From:
Utah, USA
|
Posted 28 Jul 2017 8:13 am
|
|
| The instrument has sold, pending payment. Forum donation will be sent following payment. It is rather emotional to see it ge, but it'll be in good hands. |
|
|
|
Andy DePaule
From:
Saigon, Viet Nam & Springfield, Oregon
|
Posted 28 Jul 2017 9:07 am My Hat's off to Mr. Hatt
|
|
My Hat's off to Mr. Hatt
That is a wonderful design and the workmanship very nice indeed.
While wondering if I really needed another steel, I saw it had sold just that fast! No surprise there. 
Think I may want to steal your steel idea and build one for myself now...
Started one a few years back, but the ex left it out in the rain sometime in the winter before the divorce was final and the time I got my house back. Oh well! 
Best regards,
Andy
_________________
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project. |
|
|
|
Tim Russell
From:
Pennsylvania, USA
|
Posted 28 Jul 2017 9:41 am
|
|
Pedel Bro's are awesome - I am surprised that companies don't actively build these for the market.
_________________
Sierra Crown D-10 |
|
|
|
