| Author |
Topic: Metal case corners. |
Charlie Hansen
From:
Halifax, NS Canada and Various Southern Towns.
|
Posted 19 Jul 2017 6:24 pm |
|
Where could I buy metal corners for a Carter S10 case?
_________________
I don't know much but what I know I know very well.
Carter S-10 3X5, Peavey Nashville 112, plus Regal dobro and too many other instruments to mention.
Bluegrass Island CFCY FM 95.1 Charlottetown, PE, Canada, on the web at cfcy.fm.
A Touch Of Texas CIOE FM 97.5 Sackville, NS, Canada,
on the web at cioe975.ca. |
|
|
 |
Larry Moore
From:
Hampton, Ga. USA
|
|
|
|
Charlie Hansen
From:
Halifax, NS Canada and Various Southern Towns.
|
Posted 20 Jul 2017 3:31 am
|
|
Thanks. The corners on my case are big ugly things. I think the original owner had wheels on it and took them off before selling.
_________________
I don't know much but what I know I know very well.
Carter S-10 3X5, Peavey Nashville 112, plus Regal dobro and too many other instruments to mention.
Bluegrass Island CFCY FM 95.1 Charlottetown, PE, Canada, on the web at cfcy.fm.
A Touch Of Texas CIOE FM 97.5 Sackville, NS, Canada,
on the web at cioe975.ca. |
|
|
|
Michael Maddex
From:
Northern New Mexico, USA
|
Posted 20 Jul 2017 9:31 am
|
|
Antique Electronics has Metal Corners. While they have a great selections of parts and stuff for old electronics, they also have a good selection of General Electronics and Hardware.
HTH. Good luck with your project.
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
|
|
|
Charlie Hansen
From:
Halifax, NS Canada and Various Southern Towns.
|
Posted 20 Jul 2017 12:15 pm
|
|
Thanks Jerry. Lots of great stuff here. The corners on my case are ball corners. I don't know if they're original or not. I think I'll just replace them all.
_________________
I don't know much but what I know I know very well.
Carter S-10 3X5, Peavey Nashville 112, plus Regal dobro and too many other instruments to mention.
Bluegrass Island CFCY FM 95.1 Charlottetown, PE, Canada, on the web at cfcy.fm.
A Touch Of Texas CIOE FM 97.5 Sackville, NS, Canada,
on the web at cioe975.ca. |
|
|
|
Fred Justice
From:
Mesa, Arizona
|
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 20 Jul 2017 12:54 pm
|
|
You're Welcome Charlie. Here's a 1 1/2" corner that I have and see on a lot of steel cases. Has the built in bulb that also acts as a sort of glide. http://www.pennelcomonline.com/us/Penn-Elcom-Medium-Ball-Corner-C1187Z/m-8733.aspx
Of course you need to make sure your existing straps etc. will allow a 1 1/2" corner.
Another nice thing about these is, for a heavy item like a steel, the ball is taller than the mounting screw area and allows space so that the screws/rivets don't gouge your expensive wood floors or snag the carpet. |
|
|
|
