| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic curly maple??
Reply to topic
Author Topic:  curly maple??
Jimmie Martin

 

From:
Ohio, USA
Post  Posted 21 Apr 2005 1:00 pm    
Reply with quote

i need to buy some curly maple and i tried 2 places on the internet and they wanted a lot of money for it. like 2 hundred dollars for 3 pieces of 3/4" by 12" by 36". there has to be somewhere it can be bought cheaper. thanks guys
View user's profile Send private message Send e-mail
Farris Currie

 

From:
Ona, Florida, USA, R.I.P.
Post  Posted 21 Apr 2005 1:13 pm    
Reply with quote

Robert,i bought birdseye, and myrtle wood from TimberLand but it sure isn't cheap.and the shipping will kill ya to.i got 8ft.boards shipped ups.almost as much as the wood cost.good luck farris
View user's profile Send private message
Mark Vinbury

 

From:
N. Kingstown, Rhode Island, USA
Post  Posted 21 Apr 2005 3:09 pm    
Reply with quote

Try eBay.There is a lot of great wood available for reasonable prices.
View user's profile Send private message Send e-mail Visit poster's website
Webb Kline


From:
Orangeville, PA
Post  Posted 21 Apr 2005 6:04 pm    
Reply with quote

Robert, Call Dwight Lewis Lumber Co. in Picture Rocks, PA. Mel and Mark are about as reasonable as anyone I've ever delt with. You can probably get what you're looking for for under 50 bucks delivered.

It's all good Northern Tier Maple too. That's about as good as it gets.

1 800 233 8450.
View user's profile Send private message Send e-mail
Jimmie Martin

 

From:
Ohio, USA
Post  Posted 21 Apr 2005 6:12 pm    
Reply with quote

thanks guys. i will give those guys a call.
View user's profile Send private message Send e-mail
Steve Frost

 

From:
Scarborough,Maine
Post  Posted 21 Apr 2005 6:30 pm    
Reply with quote

The 12 inch width you mention you mention may be the culprit. Around here, curly maple is about $6 a board foot, but I don't see much that's 12 inches wide with good figure. Good luck!
View user's profile Send private message Send e-mail
Al Carmichael

 

From:
Sylvan Lake, Michigan, USA
Post  Posted 22 Apr 2005 7:53 am    
Reply with quote

Have you checked any hardwood lumber mills in your area? I buy this sort of thing locally. It still ain't cheap, but if you can see what you are buying and you can cut out the shipping cost, you'll be way ahead.
View user's profile Send private message Send e-mail
Mark Ardito


From:
Chicago, IL, USA
Post  Posted 22 Apr 2005 8:38 am    
Reply with quote

Robert,

Curly Maple is not that "rare" and should be available at ANY local lumber mill or hard wood dealer in Ohio. However, you will be HARD pressed to find a piece of Curly Maple with high figure that is 12" wide. You will be looking at a "glue up" for this width. Find yourself a hard wood dealer in the Yellow Pages and that should do it. If you don't have the proper tools to make the glue-up, most lumber mills or dealers will do it for you at an additional fee...just a few bucks.

Cheers!
Mark Ardito


------------------
Sho~Bud Pro I, Fender D-8 (C6&E13) http://www.darkmagneto.com
http://www.arditotech.com

View user's profile Send private message Send e-mail
Ron !

 

Post  Posted 22 Apr 2005 8:42 am    
Reply with quote

I recently bought some birdseye here in the Netherlands.Over here birdseye is twice as much as in America.The 4 pieces I bought are just enough to build me a Double body cabinet.Price.....€342euro.
It's just that this will be my personal steel and there for I am using massive Birdseye.Normally I use birdseye finish.Don't cost that much.

Ron

------------------
Nikaro Steel Guitars
Nikaro SD10 4x6-Nikaro SD10 4x5-2Peavey 112 Ultra Tube.
nikarosteelguitars@planet.nl
European Steel Guitar Forum


View user's profile Send private message
Jimmie Martin

 

From:
Ohio, USA
Post  Posted 2 May 2005 3:15 am    
Reply with quote

you can close this topic
View user's profile Send private message Send e-mail
Jennings Ward

 

From:
Edgewater, Florida, R.I.P.
Post  Posted 12 May 2005 6:40 pm    
Reply with quote

ROBERT, I HAD THE SSAME PROBLEM AS YOU..TO MANNY DOLLARS AND NOT ENOUGH WOOD. I WANTED TO BUILD FIDDLES AND MANDOLINS ECT: WELL AFTER RUNNING UP BLIND ALLEYS FOR TOO LONG, I WENT TO,,,,,,,,,GEORGIA PACIFIC...... IN BLUEFIELD W.VA. THEY BUY UP ALL THE TIMBER ARROUND THERE......THEY SOLD ME A CURLY MAPLE TREE, CUT IT IN LENGTHS THAT I COULD HANDLE, 36 INCHES AND I BRAUGHT THE WHOLE TREE HOME.... THIS WAS ABOUT 5 YRS AGO AND IT COST ME $ 70.00 FOR A WHOLE TREE, {LOG } WITH ABOUT 100 BOARD FEET OF LUMBER..... BLUEFIELD IS NOT TOO FAR FROM YOU, IF YOU ARE IN A HYRRY.....12 " CURLY MAPLE 6 QUARTER,, FORGET IT..... ANY AND ALL CURLEY MAPLE THEY GET IS MADE INTO VINEER....THAT IS THE REASON THAT THE PRICE IS SO HIGH, OR ONE OF THEM.....GOOD LUCK IN YOUR QUEST FOR C.M. JENNINGS

------------------
EMMONS D10 10-10 profex 2 deltafex ne1000 pv1000, pv 31 bd eq, +
View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron