| Author |
Topic: please close for now Bob |
Dennis Martin
From:
Batesville, Arkansas, USA
|
Posted 27 Jun 2017 9:21 am |
|
Shipping included until ,July 3. Due to some personal circumstances, I am putting my Rittenberry Prestige SD10 up for sale. It s in excellent condition with five knees and four pedals. It is a very nice black mica steel with a near mint Thomas Case. At this time I need to sell outright so no trades at present. Price is $3,850 including shipping until July 3. I would consider meeting a reasonable distance to make the exchange and avoid shipping. Emmons setup.
Franklin Pedal + is 0 position. The other three pedals are Emmons
"E"s are on the left knee
LKV lowers B's on 5 and 10 to A#
RKL - raise 1 from F# to G#, raises 2 from D# to E, and lowers 6 from G# to F#
RKR- lowers 2 from D# to D (split) and then to C#, and lowers 9 from D to C#.
Thanks for looking
[img]http://bb.steelguitarforum.com/userpix1504/7187_IMG_0957_1.jpg[/img
Last edited by Dennis Martin on 3 Jul 2017 12:30 pm; edited 6 times in total |
|
|
 |
Mickey Adams
From:
Bandera Texas
|
Posted 27 Jun 2017 6:42 pm
|
|
BEAUTIFUL!!!!>....BUMP!
_________________
ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Dennis Martin
From:
Batesville, Arkansas, USA
|
Posted 29 Jun 2017 1:57 pm Prestige
|
|
| To the top please |
|
|
|
Dennis Martin
From:
Batesville, Arkansas, USA
|
Posted 1 Jul 2017 8:15 am Prestige
|
|
| Price lowered to $3850 including shipping but only till July 3. Thanks for all comments and interest |
|
|
|
gary pierce
From:
Rossville TN
|
Posted 1 Jul 2017 10:12 am
|
|
| What an awesome guitar, and way under what a new one cost, with no wait. |
|
|
|
memphislim
From:
Austin, Texas
|
Posted 1 Jul 2017 11:57 am
|
|
| Gary, in the interest of honesty here I feel compelled to differ with your opinion. This guitar is not priced way under what a new one would cost. I priced this same guitar a few months ago with Mr Rittenberry and the price here is around what a new one would cost. Give, or in the case of my quote, take a few hundred dollars. |
|
|
|
John McClung
From:
Olympia WA, USA
|
Posted 1 Jul 2017 2:15 pm
|
|
Are the crossrods fully round, or have a flat side somewhere for easy-to-remove bell cranks. I seem to recall Gary Rittenberry changed from hex rods to round for the sake of better tone, is that borne out on the Prestige model?
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Dennis Martin
From:
Batesville, Arkansas, USA
|
Posted 1 Jul 2017 2:51 pm Prestige
|
|
| Yes sir. The crossroads are round. Also, in my opinion, this guitar is very near mint. If there is a scratch anywhere I haven't seen it. But then again I have never been accused of being overly observant. I will try to load closeup pictures |
|
|
|
Dennis Martin
From:
Batesville, Arkansas, USA
|
Posted 1 Jul 2017 11:51 pm Prestige
|
|
| John, let me amend my last post. I am away from my home and the steel until later afternoon on Sunday. The croasrods appear round from the pictures I have. I will check more closely when I get home to see if there are any flat spots. Thanks for the inquiry. |
|
|
|
mtulbert
From:
Plano, Texas 75023
|
Posted 2 Jul 2017 5:44 am
|
|
John
The cross rods are not entirely round. There is one area which is flat to secure the bell cranks. Picture on request. These guitars sound amazing. I would jump on it if I were you. Waiting time gets longer and longer if Gary is even taking orders.
Regards
_________________
Mark T
Infinity D-10 Justice SD-10 Judge Revelation Octal Preamp, Fractal AXE III, Fender FRFR 12 |
|
|
|
Dennis Martin
From:
Batesville, Arkansas, USA
|
Posted 2 Jul 2017 6:29 am Prestige
|
|
| Thanks Mark. I was away from home and I only had pictures and wasn't sure. I appreciate the post |
|
|
|
Dennis Martin
From:
Batesville, Arkansas, USA
|
Posted 2 Jul 2017 6:32 am Prestige
|
|
| Thanks Mark. I was away from home and I only had pictures and wasn't sure. I appreciate the post |
|
|
|
Mickey Adams
From:
Bandera Texas
|
Posted 2 Jul 2017 8:13 pm Ritt
|
|
i have owned several Rittenberry guitars over the last few years...all of them superb. 3 years ago i bought an ultralight S10 from Gary.....it is absolutely my Go-To travel guitar...a very integral part of my collection...bump er up
_________________
ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Dennis Martin
From:
Batesville, Arkansas, USA
|
Posted 3 Jul 2017 12:25 pm Prestige
|
|
John here is a close up picture of the crossroads they do indeed have a flat spot for easy changing of bell cranks. I apologize for my ignorance. Thanks to everyone for their interet |
|
|
|
Dennis Martin
From:
Batesville, Arkansas, USA
|
Posted 3 Jul 2017 12:29 pm Please Close
|
|
| Bob, I have to be out of state for the next 12 days for medical reasons, please close this post for now. I will repost later. I would like to thank everyone for their support and interest in the Prestige. It's a great guitar. But if f someone were interested now, I couldn't ship until I got back home. Thanks everyone. And thank you Bob for hosting the site |
|
|
|
