| Author |
Topic: Peavy Nashville 400 Replacement Pots |
Justin Mull
From:
Virginia, USA
|
Posted 26 Jun 2017 3:06 pm |
|
Hello,
Was wondering if anyone has had to replace their pots in their Nashville 400? If so what part numbers did you use. I'm having some issues locating a reverb pot for my NV400. There are thousands on mouser and digi key just want to make sure I purchase the correct one.
Thanks!  |
|
|
 |
Bill Ferguson
From:
Milton, FL USA
|
Posted 27 Jun 2017 10:17 am
|
|
Just call Mike Brown at Peavey. He can give you the original part # and then connect you to parts dept.
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Justin Mull
From:
Virginia, USA
|
Posted 27 Jun 2017 12:14 pm
|
|
| I have done that, they no longer have the part available, I was able to find out the company who used to make the pots for Peavy, hopefully I can get ahold of them and cross reference a number. Ill updated when I find out. |
|
|
|
Jerry Erickson
From:
Atlanta,IL 61723
|
Posted 2 Jul 2017 6:34 am
|
|
| Looks like it's a 10K pot with a linear taper. IIRC, the knobs push on, so you'll want a knurled shaft. |
|
|
|
Justin Mull
From:
Virginia, USA
|
Posted 3 Jul 2017 5:31 pm
|
|
| Ok, that helps some. I'll post pictures and information when I find one that will work. I'm sure I'm not the only one that has run into this issue. |
|
|
|
