| Author |
Topic: String size |
Larry Ravlin
From:
Oregon, USA
|
Posted 8 Jun 2017 5:16 pm |
|
My steel is tuned F#, D#, G#, E, B, G#, F#, E, D, B.
My strings .013,.015,.012,.014,.017,.020,.025,.030,.034,.036.
I'm thinking some are not correct, I'm thinking I should have.
.013,.015,.012,.014,.018,.022w,.026,.030,.034,.038
Yes, No? You have to remember I am new at this.
_________________
Gibson Les Paul Studio
Bugera V modded out
Sold My Grand Piano (sob)
Last edited by Larry Ravlin on 8 Jun 2017 8:19 pm; edited 1 time in total |
|
|
 |
Jerry Overstreet
From:
Louisville Ky
|
Posted 8 Jun 2017 5:24 pm
|
|
| What steel do you have? The gauges you have chosen are very common for many 10 string pedal steels with the E9th tuning. Some people prefer an .011 at the 3rd position, but I like a .012 same as your listing. |
|
|
|
Larry Ravlin
From:
Oregon, USA
|
Posted 8 Jun 2017 5:51 pm
|
|
I have a Sho-Bud Pro 3 Custom
_________________
Gibson Les Paul Studio
Bugera V modded out
Sold My Grand Piano (sob) |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 8 Jun 2017 6:07 pm
|
|
Both of those are fine. I prefer the 6th wound, but it's down to taste.
The 10s on the 3rd string are fine; they were the standard for decades. They'll need a slightly longer pull than the 12, and the 10 has more 'bite', but the 12 has more 'beef.'
Regarding the 6th, I recommend trying both.
Plain-doesn't need as long a pedal and lever throw, is more subject to cabinet drop, sounds different.
Wound-needs much more pedal and lever travel (VERY long throw if you're gonna drop it to F#), less subject to cabinet drop, sounds different.
If you shop around the different brands of pedal steel sets, you'll find a lot of variations on the theme
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 8 Jun 2017 6:08 pm
|
|
| I believe that is the set that Sho-Bud wrangler Ricky Davis uses, so looks like you should be good to go. Good luck with your steel guitar experience. |
|
|
|
Larry Ravlin
From:
Oregon, USA
|
Posted 8 Jun 2017 6:12 pm
|
|
I'm already having a good time, having a musical background is going to help me immeasurably
_________________
Gibson Les Paul Studio
Bugera V modded out
Sold My Grand Piano (sob) |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 8 Jun 2017 6:31 pm
|
|
The .0355 seems strange for the 10th string. I never heard of a 35 1/2 string gauge. I would prefer a .038. Also I use a .0115 3rd string. Used .010 back 40 years ago.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Larry Ravlin
From:
Oregon, USA
|
Posted 8 Jun 2017 7:53 pm
|
|
Depends on where you measure it, I got readings all down the string from .0355 to .0370 near the tuners but that was right at the nut, I guess a happy medium would be .0360. I don't know what the tolerance is for the strings but there's a difference up and down the strings, I don't believe that is going to effect my playing (ha, ha) but this is not aerospace gentlemen, a 1/2 a tenth here and there is going to be of no consequence at this stage of the game. When they start getting hard to tune I'll get a new set. Thanks for all the info guys.
_________________
Gibson Les Paul Studio
Bugera V modded out
Sold My Grand Piano (sob) |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 9 Jun 2017 3:59 am
|
|
| Larry..One particular brand that is available in the gauges listed second are the Ernie Ball E-9 sets with the one exception of a .010 for the third which can be easily substituted with a .012. |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 11 Jun 2017 9:45 am
|
|
| Quote: |
| I got readings all down the string from .0355 to .0370 near the tuners |
Measuring string that have been tuned to pitch - especially if they have been on a while - is never accurate. Wound string are often up to .002 off (on the low side).
You can find recommended gages on the D'Addario and Ernie Ball sites. Those work for any brand of strings. D'Addario even has a far more accurate string "determinator" where you plug in both notes and scale length. Many of the charts are based on 25.5" or 24.75:" scales and most modern steels are shorter.
But as noted above gage is not etched in stone. Use those resources as a guide only and use whatever feels/sounds best.
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
|
|
|
Ray Thomas
From:
Goldsboro North Carolina
|
Posted 12 Jun 2017 4:40 pm Strings
|
|
Larry, I sell Livesteel strings, can furnish you either of what you listed, email rayssteel@gmail.com will help if I can. Bobs post above is good
_________________
Ray Thomas
Livesteel Strings Dealer
Call 919-920-5482
Text rayssteel@gmail.com or email |
|
|
|
Ricky Davis
From:
Bertram, Texas USA
|
Posted 13 Jun 2017 6:25 am
|
|
b0b's analysis is SPOT ON!!
I designed my gauges in my E9 set from Jagwire to specialize for the "short" scale pedal steel; which is a Sho~bud and many other pedal steels being made. The standard set everyone got used to was designed for the "Long" scale Emmons pedal steel and that's a big difference between a 24" sho~bud scale and a 24 1/4" Emmons or 24 1/2" and longer some other pedal steels.
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com |
|
|
|
Don Kuhn
From:
Poetry/Terrell ,Texas, USA
|
Posted 13 Jun 2017 5:17 pm
|
|
| Captain Bob that was some good information thanks for the info |
|
|
|
Jim Williams
From:
Meridian, Mississippi, USA - Home of Peavey!
|
Posted 21 Jun 2017 8:09 am
|
|
Interesting topic. I just recently bought a GFI student model and it's string gauges are just a bit different from the set I can get locally. Local music store sells Ernie Ball Set. Only difference is in two strings. my guitar has a 12 on the highest string, theirs has a 13, and their set uses a 10 instead of an 11...would I be o.k. with this set? I just like being able to buy strings locally. I guess I could just buy the set and a couple of single strings for the 11 and 12...I think their singles are also Ernie Ball.
_________________
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal. |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 27 Jun 2017 3:11 pm
|
|
| Quote: |
| would I be o.k. with this set? |
As long as the changes work it makes absolutely no difference - many players use a couple thousandth different in either direction depending on the tone and feel they want.
If the changes reach the proper notes and the sound is OK don't worry about it - but you can always try the other gages you found. If you change gages you will have to adjust the stops slightly, though.
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
