10th string on push pull

Willie Crisel · From: Charlotte, Tennessee, USA

my 10th string will not stay in tune,,,it's a 77 SD10 push pull,,,it's always flat,,never sharp,,,i'm thinking roller nut,,,the pedal is staying in tune c#,,but not the open B,,,,,any ideas,,,,

Bobby Bowman · From: Cypress, Texas, USA, R.I.P.

Check where the lower stop screw hits on the lowering finger. It (the finger) probably needs some attention from the gouging that can occur. This is usually caused fron a guitar not being properly adjusted. Email if you wish to or call me at 281-856-9453 and we'll talk about it.
BB

------------------
If you play 'em, play 'em good!
If you build 'em, build 'em good!
http://www.bobbybowman.com

Jerry Roller · From: Van Buren, Arkansas USA

Also check the lower return spring. It may need more tension.
Jerry

Willie Crisel · From: Charlotte, Tennessee, USA

thanks guys,,,going to play in an hour,,i'll look at those things,,,,i love the tone of this guitar,,that was the only little quirk,,

Willie Crisel · From: Charlotte, Tennessee, USA

I tightened the lowering screw,,and it fixed it,,,thanks again

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: