| Author |
Topic: Sho Bud |
Bobby Newman Dalton
From:
Saginaw, Texas, USA
|
Posted 6 Apr 2005 1:26 pm |
|
To All,
I'm new to Steel (4 mts)and loving it although I would like to chunk it out the window after about five minutes of trying to learn how to hold my right hand and then totally forgetting about knees, feet, volume pedal and left hand, not to mention trying to read Tab at the same time! I thought this was going to be easy!?! LOL! The question I have is a friend of mine has an Old Sho Bud with Model Type and SN#, I was just wondering if we could find out what year this Steel was manufactured and where I could go to find out this information? I appreciate all your help!
Sincerely,
Bobby. |
|
|
 |
Wayne Morgan
From:
Rutledge, TN, USA
|
Posted 6 Apr 2005 1:47 pm
|
|
Model Type and SN#,
If you would post this somebody will most likely get you in the ballpark of when it was made. also Check to see if it has tear drop knee's and wide pedals also. As far as a site you can get this info with the serial #, I don't know of one.
Good Luck
Wayne |
|
|
|
Larry Robbins
From:
Fort Edward, New York
|
Posted 6 Apr 2005 1:52 pm
|
|
Cant help you with serial# but, as far as model goes, try....
http://www.shobud.org/models.html
------------------
Sho-Bud ProII, Pro III custom,
Fender Steelking,Hilton pedal,Tut Taylor "Virginian"
|
|
|
|
Clyde Lane
From:
Glasgow, Kentucky, USA
|
Posted 6 Apr 2005 1:55 pm
|
|
Sho-Bud serial numbers will not tell you anything about when it was built. If you could post some pictures of top and bottom I bet Ricky Davis could get within 6 months
Clyde |
|
|
|
Brett Day
From:
Pickens, SC
|
Posted 6 Apr 2005 2:24 pm
|
|
| Bobby, Sho-Bud started building steels in 1957. Brett, Emmons S-10, Morrell lapsteel, GFI Ultra D-10 |
|
|
|
Larry Robbins
From:
Fort Edward, New York
|
Posted 6 Apr 2005 2:55 pm
|
|
Hi Brett,
Nice to see you post! Hope all is well.
Your fellow stealer,
Larry
[This message was edited by Larry Robbins on 06 April 2005 at 03:56 PM.] |
|
|
|
