| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Canopus Lap Steel?
Goto page 1, 2  Next
Reply to topic
Author Topic:  Canopus Lap Steel?
Roger Shackelton

 

From:
MINNESOTA (deceased)
Post  Posted 22 Sep 2001 6:50 pm    
Reply with quote

Does anyone on the forum own a Canopus lap steel guitar, Model YL-8s? How does it compare to other lap steel guitars?

Roger
View user's profile Send private message Send e-mail
George Keoki Lake


From:
Edmonton, AB., Canada
Post  Posted 22 Sep 2001 10:07 pm    
Reply with quote

If it is of any help to you, I played a Canopus double neck model while in NZ last February and found it to be superb over my Fender triple custom. Very fine workmanship, excellent pickups and a real nice fat tone. I'd love to have one but they are rather pricey for my budget...besides, I'd probably be looking at alimony if I bought yet another guitar! (ha!)
View user's profile Send private message
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 23 Sep 2001 12:41 pm    
Reply with quote

Once again, I find myself agreeing with Keoki. Nice full tone and a very well built steel. I don't know what wood is used, but it ain't light. This guitar is a work horse.

It appears to be in the Stringmaster design.
View user's profile Send private message Send e-mail
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 23 Sep 2001 12:46 pm    
Reply with quote

As you can see, it has a 3 position pick up control in addition to the tone control. The tone control, BTW, has the most range I've experienced than on any other steel. There's the neck selector switch, and of course volume control. Nice hardware and strung through the body.
View user's profile Send private message Send e-mail
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 23 Sep 2001 12:47 pm    
Reply with quote

[This message was edited by HowardR on 23 September 2001 at 01:49 PM.]

View user's profile Send private message Send e-mail
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 23 Sep 2001 1:01 pm    
Reply with quote

I forgot to mention, 24" scale.
So how does it compare to other steels? I'm not so experienced as to objectively compare a lot of brands. I did just sit down to a Stringmaster (24 1/2" scale). The Stringmaster is on the brighter side while the Canopus is more bassy. I would imagine that Hawaiian music might be best suited for the Canopus and swing/country on the Stringmaster. We all know that an accomplished player will sound great on either.

I will say that it is in the class of "the best" and that if you were inclined to purchase a Canopus, I believe that you would be quite happy with it. I know that the topic question was with regard to the YL - 8. Sorry that I can't help you with that model.

I don't quite know how old mine is. I did get it on ebay and I believe I got a very decent deal on it.

[This message was edited by HowardR on 23 September 2001 at 02:45 PM.]

View user's profile Send private message Send e-mail
Jody Carver


From:
KNIGHT OF FENDER TWEED
Post  Posted 23 Sep 2001 5:59 pm    
Reply with quote

Since this thread was started I had been in touch with Yasu Kamira..He builds a fine guitar and the sound is typically Hawaiian.

It lacks the punch and bite of a Fender..in my opinion and the cost is high,but if thats the sound you prefer it may be worth looking into.

[This message was edited by Jody Carver on 22 September 2003 at 09:11 PM.]

View user's profile Send private message Visit poster's website
Maurie Junod

 

From:
Oak Forest, Illinois, USA
Post  Posted 23 Sep 2001 6:27 pm    
Reply with quote

Jody,

They advertise in our HSGA newsletter. I tried their URL but it didn't work. They
are located in Japan. However, their U.S.
contact is Scotty. You can't go wrong with
him.

Maurie
View user's profile Send private message Send e-mail Visit poster's website
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 23 Sep 2001 7:05 pm    
Reply with quote

If you go to Brad's Page of Steel, click on manufacturers of electric steels and Canopus is one of the manufacturers listed. You can get to their website by clicking on the hyperlink provided. They make a beautiful 8 string version of the gibson EH - 150.

Jody, Canopus is not your typical household name in the world of steel guitars. They're not vintage as far as I know. I've only seen one on ebay (which I have) and one at the ISGC in 1999, being played by Leonard T. Zinn. I believe that it is quite a popular brand that is favored in Hawaii.
View user's profile Send private message Send e-mail
Jody Carver


From:
KNIGHT OF FENDER TWEED
Post  Posted 23 Sep 2001 8:03 pm    
Reply with quote

Edited as my comments were irelevant to this topic.

[This message was edited by Jody Carver on 22 September 2003 at 08:52 PM.]

View user's profile Send private message Visit poster's website
George Keoki Lake


From:
Edmonton, AB., Canada
Post  Posted 23 Sep 2001 8:55 pm    
Reply with quote

Some of the owner/players of Canopus in Hawai'i:
*(the late) Barney Isaacs
*Alan Akaka
*Casey Olsen
*Harold Hakuole
*Greg Sardinha
plus many others.
Yes, it is very popular with the Hawaiians.
View user's profile Send private message
Gene Jones

 

From:
Oklahoma City, OK USA, (deceased)
Post  Posted 24 Sep 2001 3:24 am    
Reply with quote

Jody...Paul will have to be your "Lieutenant" as he speaks better Japanese than me....I'll drive the car.
View user's profile Send private message Visit poster's website
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 24 Sep 2001 3:45 am    
Reply with quote

I'll volunteer to share the driving, it's a long way to Japan.......
View user's profile Send private message Send e-mail
Jody Carver


From:
KNIGHT OF FENDER TWEED
Post  Posted 24 Sep 2001 8:22 am    
Reply with quote

Gene,,,,Howard,,,
It will have to be a "Honda, Toyota, Suzuki,
or any "Jap Car" we cant ride in on the Harley Gene..

[This message was edited by Jody Carver on 22 September 2003 at 08:54 PM.]

View user's profile Send private message Visit poster's website
Jody Carver


From:
KNIGHT OF FENDER TWEED
Post  Posted 24 Sep 2001 9:06 am    
Reply with quote

Hi Roger,,,,thanks for starting this thread.

Iam going to look into these guitars,,,they look real good.

Howard,,,thank you as well for the info on these guitars,,,I have one problem however.

Years ago,,,I was always introduced in the following manner.

Ladies and Gentlemen ,,,Here is Jody Carver & his "Big Fender" reffering to the quad or triple neck....

Here is my problem,,,,how would this sound if I were to buy a Canopus??

Ladies and Gentlemen ,,,,Here is Jody Carver
& his "Big Canopus" something dont sound right,,,do you know what I mean???

Wonder If they would build me a quad Canopus
then I would have the "biggest Canopus" known to mankind...what is your thoughts???
View user's profile Send private message Visit poster's website
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 24 Sep 2001 12:14 pm    
Reply with quote

Jody, I quote a lot of pithy sayings because they are apropos.

First off, "Size doesn't matter", ( I've heard that about other people). Just remember "it's not the size of your Canopus, it's what you do with it".

I have only seen double necks on the Canopus site, however, another saying in my industry is "for money, you can buy anything". I'm sure the good folks at the local Canopus shop will take this into consideration. Before you "rush the gate", try mine. If you ever get into NYC, let me know. I can take it in with me to the shop, along with an amp and you can play "Moon Over Maui" before you make a decision. I can also bring it to Norwalk if you are going. "Try before you buy".

[This message was edited by HowardR on 24 September 2001 at 01:17 PM.]

View user's profile Send private message Send e-mail
Jody Carver


From:
KNIGHT OF FENDER TWEED
Post  Posted 24 Sep 2001 4:19 pm    
Reply with quote

I have cleaned up my act since this thread was started. I was a "bad boy",,now you were saying ?

[This message was edited by Jody Carver on 22 September 2003 at 08:17 PM.]

View user's profile Send private message Visit poster's website
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 24 Sep 2001 7:06 pm    
Reply with quote

Jody,Jody,Jody,.....phew! Never a dull moment when he's around.

Interesting that all of the Canopus steels are a 22 1/2" scale. Mine is a 24". I wonder if that's because it's an older model or perhaps it was made to order with that scale.
Anyhow, those are some healthy prices listed. I guess I did get a good buy ($650.00).
As I mentioned, I saw Leonard T. Zinn playing one at the '99 convention and was quite impressed with both player and guitar. A few months later when one appeared on ebay, I went for it. I think that very few people knew or even heard of the Canopus so there wasn't much competion. I've said several times before on several other threads that you have to pick and choose your battles on ebay. It has become increasingly difficult to do that at present though.
View user's profile Send private message Send e-mail
George Keoki Lake


From:
Edmonton, AB., Canada
Post  Posted 24 Sep 2001 9:51 pm    
Reply with quote

You guys think those prices are high...My friend in NZ paid double due to their low rate of exchange. We in Canada have to pay through the nose as our dollar is worth only .64 to the US $$$$! (NZ is less than .50!!) That's the reason I mentioned CANOPUS is rather pricey.

And Jody...I'm having second thoughts about you playing with another guy's canopus! (ha!)
View user's profile Send private message
David Stehman

 

From:
Port Orchard, WA, USA
Post  Posted 24 Sep 2001 11:33 pm    
Reply with quote

George
Are there Canagian makers of lap or
pedal steels.?
Dave Stehman
View user's profile Send private message Send e-mail
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 25 Sep 2001 4:09 am    
Reply with quote

Joseph Yanuziello is a fine maker of acoustic and electric steels.

Linkon makes pedal steels and interestingly enough, they make a "lap pedal steel". It comes with 3 & 2, or 3 & 4 with two wrist levers and keyless. That's what it states on their website although there is no photo of that. I'd love to see that or hear from anyone that has, or has played one.

[This message was edited by HowardR on 25 September 2001 at 05:10 AM.]

View user's profile Send private message Send e-mail
Jody Carver


From:
KNIGHT OF FENDER TWEED
Post  Posted 25 Sep 2001 8:33 am    
Reply with quote

Can anyone post an e mail address for me to contact "Canopus"?? appreciate it if you would. Thanks.....
View user's profile Send private message Visit poster's website
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 25 Sep 2001 9:06 am    
Reply with quote

Wow, Jody, you really, have a "yen" for this steel. I think that you better have many yen for a triple neck.
I don't see an email address on their website but there is a phone & fax number. You may be better off sending a fax;
011 - 81 - 3 - 3465 - 0589 fax
011 - 81 - 3 - 3465 - 0872 tel
View user's profile Send private message Send e-mail
George Keoki Lake


From:
Edmonton, AB., Canada
Post  Posted 25 Sep 2001 9:23 am    
Reply with quote

David..."Canagian" ? I think you meant Canadian. Yes there are makers of pedal guitars all across the country, mostly back yard garage makers. There are a few who are in the biz in the Toronto and Winnipeg area which I am sure Ian McLatchie can fill you in further.
View user's profile Send private message
Jody Carver


From:
KNIGHT OF FENDER TWEED
Post  Posted 25 Sep 2001 12:44 pm    
Reply with quote

Howard,,,me with "much yens"?? I dont think so. I want to see how much after all these years has anyone come up with a steel guitar
non pedals,,,,being close to what Leo Fender did many years ago.

[This message was edited by Jody Carver on 22 September 2003 at 09:15 PM.]

View user's profile Send private message Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron