| Author |
Topic: Removing speaker from Nashville 112 |
Jeff Metz Jr.
From:
York, Pennsylvania, USA
|
Posted 16 Feb 2017 5:53 am |
|
Well unfortunately my speaker is damaged and needs to be replaced. I tried removing the speaker but something appears to be holding the speaker on. I unscrewed the 8 nuts completely off and it won't even wiggle. Is it stuck to paint or were they glued to the baffle? Can't really get in there to pry it up. What do you suggest?
Thanks
_________________
Mullen G2 SD10 , Lil Izzy Buffer, Goodrich 120 volume pedal, Boss DD-7, Peterson Strobo flip, Peavey Nashville 112 |
|
|
 |
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 16 Feb 2017 7:24 am
|
|
hold it about 8"-12" above a carpeted floor with the speaker facing straight up...
....and drop it. |
|
|
|
Howard Parker
From:
Maryland
|
Posted 16 Feb 2017 7:27 am
|
|
What Donny said.
I removed the head first though. Easy-peasy.
h
_________________
Howard Parker
03\' Carter D-10
70\'s Dekley D-10
52\' Fender Custom
Many guitars by Paul Beard
|
|
|
|
Duane Dunard
From:
Troy, MO. U.S.A.
|
Posted 16 Feb 2017 8:18 am
|
|
| I have used an off set screwdriver, (bent right angle), to pry under the speaker's edge, as I tap the screwdriver with a small ball peen hammer. |
|
|
|
George Macdonald
From:
Vancouver Island BC Canada
|
Posted 16 Feb 2017 8:38 am speaker
|
|
I removed mine about a month ago to replace it with an Eminence Double T, and found it very hard to get it off also. It's just a very tight fit on those 8 bolts. By the way, the Travis Toy 12 is a great speaker for the Nash. 112. I didn't dislike the original, but the double T is an improvement. I did have to remove the reverb pan also.
Last edited by George Macdonald on 16 Feb 2017 9:18 am; edited 1 time in total |
|
|
|
John Palumbo
From:
Lansdale, PA.
|
Posted 16 Feb 2017 8:49 am
|
|
| I believe even after prying mine loose from the cabinet & bolts, I had to also remove the chassis & reverb pan just to have clearence to be able to lift out the speaker & have the outer flange of the speaker to clear the top most bolt. A little bigger job than I thought. |
|
|
|
Tony Prior
From:
Charlotte NC
|
Posted 16 Feb 2017 12:36 pm
|
|
remove the chassis and the reverb pan, this is a good time to spray clean the connectors and pots. Take advantage of the situation ! 
_________________
Emmons L-II , Fender Telecasters, B-Benders , Eastman Mandolin ,
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years
CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website |
|
|
|
Jeff Metz Jr.
From:
York, Pennsylvania, USA
|
Posted 16 Feb 2017 3:24 pm
|
|
Yes! I plan on doing a little custom work to the amp while I'm at it. Might re-cover the cab and change out the grill cloth. Thanks guys for the quick replies. I really do love this forum.
_________________
Mullen G2 SD10 , Lil Izzy Buffer, Goodrich 120 volume pedal, Boss DD-7, Peterson Strobo flip, Peavey Nashville 112 |
|
|
|
Willie Sims
From:
PADUCAH, KY, USA
|
Posted 18 Feb 2017 9:34 am
|
|
I SOMETIMES USE A GALLON PAINT CAN OPENER TO FREE A STUCK SPEAKER.JUST BEND THE END.
WILLIE SIMS |
|
|
|
