| Author |
Topic: Lace Alumitone pickup dimensions |
Steven Husting
From:
Germany
|
Posted 29 Jan 2017 5:03 am |
|
Hi -
Can anybody give me the dimensions, including depth, of the Lace Alumitone 10-string pickup? I'm finding nothing on the Lace site.
Thanks -
Steven |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 29 Jan 2017 5:05 am
|
|
It's the 4 inch bass bar, IIRC.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 29 Jan 2017 6:35 am
|
|
Clipped from previous discussion:
| Jerry Overstreet wrote: |
Like some other pickups, the top plate, or top dimension in this case, is wider than the base. The one I have is 1.5 at the very top, first 1/8". The legs are little less than 3/4" tall from there down and are 1.25 wide. The mounting holes are about 1.2 apart.
With the mounting screws, you would need app. 1 3/8" clearance down inside the mounting cavity. The topmost 1.5 width wouldn't interfere as it rises above the pick-up cut out.
Don't hold me to it, but it appears it would fit in a 1 3/8" pickup slot, as long as the cavity is not more than 11/16" or so deep. Maybe someone who's done it will look in on this thread.
[The steel guitar 10 st. neck takes the 4" unit]. |
|
|
|
|
Steven Husting
From:
Germany
|
Posted 29 Jan 2017 7:03 am
|
|
Thanks much, that is exactly what I was looking for.
Steven |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 29 Jan 2017 11:02 am
|
|
| It is the 4" model, designated as intended for a 5 string bass guitar. |
|
|
|
Steven Husting
From:
Germany
|
Posted 5 Feb 2017 2:42 am
|
|
Thanks - pickup is here and fits perfectly. Sounds pretty good, too.
Steven |
|
|
|
