Leg clamps?

Tom Wolverton · From: Carpinteria, CA

Does anyone know where a person can purchase a leg clamp that can be mounted to the side or rear face of an effects pedal? Like what is on the Freeloader (for example):

_________________
To write with a broken pencil is pointless.

Ron Funk · From: Ballwin, Missouri

Show Pro

Tom Wolverton · From: Carpinteria, CA

OK, I was being lazy. Sorry everybody. There's plenty of sources for these leg clamps, including right here at the SGF store. Order going in.
_________________
To write with a broken pencil is pointless.

Bill L. Wilson · From: Oklahoma, USA

I make mine out of PVC pipe, cut off in 1 1/2" or 2" sections, then grind a section of it into a C-clamp shape. Use small machine screws and nuts to install it on the unit and clamp it on my steel leg. The PVC is much thicker and holds up better than those thin clamps most pedal companies use. And I use the more flexible gray PVC, as the white is fairly brittle.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: