| Author |
Topic: mullen legs |
Gary Glisson
From:
munford, tn 38058
|
Posted 5 Sep 2016 11:59 am |
|
I bought a mullen RP sd-10 and I think it has 1''or taller legs, than the normal legs, its pretty tall for me, does anyone know how to shorten the legs ,without buying new ones?
thanks gary
Last edited by Gary Glisson on 5 Sep 2016 12:15 pm; edited 1 time in total |
|
|
 |
Jeff Metz Jr.
From:
York, Pennsylvania, USA
|
Posted 5 Sep 2016 2:02 pm
|
|
I would try to trade with someone looking for one inch over legs. don't forget you'll also need new pedal rods.
_________________
Mullen G2 SD10 , Lil Izzy Buffer, Goodrich 120 volume pedal, Boss DD-7, Peterson Strobo flip, Peavey Nashville 112 |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 6 Sep 2016 7:55 am
|
|
Stick a dowel into the leg that is longer than the lag and knock the plug out of the upper end. Cut off the leg and re-insert the plug.
Cut off the bottom end of the pedal rods and re-thread them. |
|
|
|
Roy Carroll
From:
North of a Round Rock
|
Posted 6 Sep 2016 8:38 am
|
|
Hi Gary, I have a set of stock length legs I would trade you.
Roy Carroll 512-657-1075
_________________
Just north of the Weird place, south of Georgetown |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 6 Sep 2016 11:57 am
|
|
You guys should be careful of the thread size. Unless I am confusing the guitar with another I once had a Mullen that had larger threads than the mostly standard 1/2"-13. I apologize if I have this wrong. I am thinking earlier models had a larger thread size. Hopefully if this is wrong Mike will straighten me out.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
