| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic S10 versus SD10 comfort
Goto page 1, 2  Next
Reply to topic
Author Topic:  S10 versus SD10 comfort
Tom Kaminski


From:
New Jersey, USA
Post  Posted 28 Jul 2016 10:38 am    
Reply with quote

Although I think I know what the answer will be ("it depends"), I have to ask: isn't having the wrist pad on an SD much more comfortable than trying to play an S10 with nowhere to rest your wrists? ... or for most players it's really no big deal or strictly a personal preference?
View user's profile Send private message Send e-mail
Fred Justice


From:
Mesa, Arizona
Post  Posted 28 Jul 2016 10:50 am    
Reply with quote

Tom to me the arm rest make all the difference in the world.
A person has to have a different right hand placement to play a S~10 as opposed to playing a SD~10 with somewhere to plant your wrist.
Thus your attack is different as well.
If I play a S~10, at the end of the song my arms weigh 40 lbs. a piece. Laughing
Mileage may very.
_________________
Email: azpedalman@gmail.com
Phone: 480-235-8797


Last edited by Fred Justice on 28 Jul 2016 10:52 am; edited 1 time in total
View user's profile Send private message Send e-mail
Skip Edwards

 

From:
LA,CA
Post  Posted 28 Jul 2016 10:50 am    
Reply with quote

I personally think that having something to support your forearm - whether it's a pad or a neck - is beneficial to your right hand technique.
I played a Sgl 10 for many years before going to a D10, and that's JMHO...
I should also mention that a full size pad does a better job of supporting your forearm than a half pad does.
Again, JMHO...
View user's profile Send private message Send e-mail
Allan Kirby


From:
Ontario, Canada
Post  Posted 28 Jul 2016 11:22 am    
Reply with quote

I own and play three S-10s, with no pads. I owned two SD-10s, with pads, in the past, but sold them. I was never comfortable with the pad, I found it awkward to play reaching across the pad, which in warm conditions, would rub and stick to my forearms. I feel I am a better player with the neck closer to me and no pad.

I currently play two to three gigs a week and my arms are not tired. Besides, I like the weight and portability of the smaller S-10 guitars.

This is just my preference and I would not suggest that it is for everybody. We are all different and need to find our own comfort zone.
View user's profile Send private message Send e-mail
Dean Holman

 

From:
Branson MO
Post  Posted 28 Jul 2016 11:36 am    
Reply with quote

As someone who is tall, I am more bunched up under an S-10 as opposed to a SD-10 or D-10. I'm way more comfortable to play those guitars as opposed to the S-10.
View user's profile Send private message Send e-mail
Norbert Dengler


From:
germany
Post  Posted 28 Jul 2016 11:58 am    
Reply with quote

i`m with alan on that one, never felt the need of a cushion on my guitar.
remember it was basically an improvised solution to cover lloyds guitar when he took away the jazz-neck.
i prefer the smaller size and simpler concept of the S 10.
never had any arm issues either.
View user's profile Send private message Send e-mail
Tim Russell


From:
Pennsylvania, USA
Post  Posted 28 Jul 2016 1:01 pm    
Reply with quote

"It depends", obviously the correct answer, lol. I do prefer a double neck, or an SD-10, but the vinyl pad can get sticky, as Allan mentioned. I've seen guys fashion makeshift pads that clamp on the legs of a single, that seems like a good idea to me. Make the pad removable, maybe with velcro, and design of a washable fabric instead of vinyl which sticks to your skin easily.
_________________
Sierra Crown D-10
View user's profile Send private message
Tom Campbell

 

From:
Houston, Texas, USA
Post  Posted 28 Jul 2016 1:17 pm    
Reply with quote

Here is my solution. I have arthritis in my right wrist...so I made a partial pad. My left hand is free to move unhampered by a full pad:



Last edited by Tom Campbell on 29 Jul 2016 5:28 am; edited 1 time in total
View user's profile Send private message Send e-mail
Ken Pippus


From:
Langford, BC, Canada
Post  Posted 28 Jul 2016 1:39 pm    
Reply with quote

Since I can play my C neck without a pad or a problem, it always seemed to me I could manage to do the same on an E9 single.

We haven't seen a whole bunch of double necks on triple bodies addressing the issue.
View user's profile Send private message Send e-mail
Paul Sutherland

 

From:
Placerville, California
Post  Posted 28 Jul 2016 3:01 pm    
Reply with quote

Arm rest for me please.




_________________
It don't mean a thing if it ain't got that swing.
View user's profile Send private message Send e-mail
Paddy Long


From:
Christchurch, New Zealand
Post  Posted 28 Jul 2016 3:23 pm    
Reply with quote

I think an SD10 is a bit more ergonomic underneath the cabinet as well - with more room to place Knee levers in a more comfortable position.
_________________
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases.
View user's profile Send private message Send e-mail
Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 28 Jul 2016 3:45 pm    
Reply with quote

Back in the 70’s I always thought I wanted an LDG, though I’ve always had a D-10... Well my Dad ended up getting an LDG, and kept it in a box for years... But now when I go to visit him, so that I don’t have to pack my D-10 up, he keeps his set up for me to play when I get there... But when I sit down to play it, unless its like 50 above in there, my forearms sweat like crazy, and I feel like Buddy Emmons in the video with him and Hal Rugg playing... I’m miserable... Someday for giggles and grins, I’d like to try an SD-10 without a pad or perhaps a 3/4 S-10, to see if that would be more to my liking.
_________________
Dale Rottacker, Steelinatune™
https://www.youtube.com/@steelinatune
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website
Jeremy Threlfall


From:
now in Western Australia
Post  Posted 28 Jul 2016 4:49 pm    
Reply with quote

Ken Pippus wrote:
Since I can play my C neck without a pad or a problem, it always seemed to me I could manage to do the same on an E9 single.

We haven't seen a whole bunch of double necks on triple bodies addressing the issue.


Word

I've never sat behind a double width guitar, so I wouldn't know

I don't like the look of big vinyl pads on a guitar, they appear a bit ... remedial to me

I quite like the look of double or 3/4 width guitars without a pad

I totally get that long-time D10 players might struggle with knee lever placement, proximity of the neck itself, and I imagine I would struggle with the proximity of the floor pedals if I was used to them being further away, which I am not

For that matter, I think I would suffer sore shoulders and considerable all-round discomfort if I had to play my guitar sitting 6 inches further away from it
_________________
Luke Drifter on Facebook
https://www.facebook.com/ralwaybell
https://www.facebook.com/jeremy.j.threlfall
http://ralwaybell.bandcamp.com/
View user's profile Send private message Send e-mail
Dave Stroud

 

From:
Texas
Post  Posted 28 Jul 2016 5:40 pm    
Reply with quote

I'm with Dean, I'm tall and love a D10 or SD10. I bet average sized people who have never gotten serious with a D10 prefer an S10. Those of us who learn on a D10 probably prefer an SD10.

And then there are those who learned on a D10 and have a light-weight S10, but secretly wish it were an SD10.
View user's profile Send private message Send e-mail
Lyle Bradford

 

From:
Gilbert WV USA (deceased)
Post  Posted 28 Jul 2016 6:08 pm    
Reply with quote

I like the SD10 but I prefer to take the pad off and have a solid piece of birch plywood or something like that covered and screw it back to the neck. Easy to keep your tuner, drink and things on a flat surface. Just feels better to me.
View user's profile Send private message Send e-mail
Lem Smith

 

From:
Long Beach, MS
Post  Posted 28 Jul 2016 6:39 pm    
Reply with quote

Fred and Dean summed it up perfect for me. An SD10 just feels so much better to me, and a larger sized person, the extra room underneath makes it easier for me on the pedals and knee levers.
View user's profile Send private message Send e-mail
Jeff Metz Jr.


From:
York, Pennsylvania, USA
Post  Posted 28 Jul 2016 6:41 pm     Clem's Setup
Reply with quote

My Buddy Clem Foust has built the Only custom pedal bar extension that I have ever heard of. He has a S10 Bolt on (aluminum neck) Push pull. Notice the custom work in the pedal area. Also built a platform for his left foot to keep both feet on an even plane.
It looks pretty sweet and also gives you the benefits of a D10 or SD10 with a s10 body. More room.


_________________
Mullen G2 SD10 , Lil Izzy Buffer, Goodrich 120 volume pedal, Boss DD-7, Peterson Strobo flip, Peavey Nashville 112
View user's profile Send private message Send e-mail
Jeremy Threlfall


From:
now in Western Australia
Post  Posted 28 Jul 2016 8:32 pm    
Reply with quote

Jeremy Threlfall wrote:
I imagine I would struggle with the proximity of the floor pedals if I was used to them being further away


yeah, that's what I'm talkin' 'bout
_________________
Luke Drifter on Facebook
https://www.facebook.com/ralwaybell
https://www.facebook.com/jeremy.j.threlfall
http://ralwaybell.bandcamp.com/
View user's profile Send private message Send e-mail
John Billings


From:
Ohio, USA
Post  Posted 28 Jul 2016 10:11 pm    
Reply with quote

So much depends on your posture and how you address the guitar. I can't stand SD10s! But I adjust my guitars so that I can sit up straight, and have my elbow just touching my side, and my arm straight out to the guitar. You know I wish I had asked Lloyd about this. Did he really need an armrest pad? Or was it just put there as a cover for all the stuff that had been removed from the C6th neck? Anyway, I don't need one, and don't like 'em! Why have to reach out across extra unused real estate? Adjust your seat, your guitar, and your posture to address the guitar correctly. No good reason to have to rest your wrist on something, unless you have a physical problem. Just my opinion. And as for room for levers? Ricky put 6 on my '74 Shobud S-10. No problem, and very easy to use!

_________________
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
View user's profile Send private message Send e-mail
Jeremy Threlfall


From:
now in Western Australia
Post  Posted 28 Jul 2016 11:50 pm    
Reply with quote

I can imagine that if you have your arms extended to reach a neck that is 8-10 inches away from you, then you may well need to rest your forearms on something. If your upper arms are hanging straight down to play a neck right in front of you, then you might need that support to a lesser extent. C6 players could probably confirm this. As per Ken's note above
_________________
Luke Drifter on Facebook
https://www.facebook.com/ralwaybell
https://www.facebook.com/jeremy.j.threlfall
http://ralwaybell.bandcamp.com/
View user's profile Send private message Send e-mail
Ben Edmonds


From:
Greenfield, Massachusetts, USA
Post  Posted 29 Jul 2016 3:27 am    
Reply with quote

I agree with John. I don't know why I'd even want to rest my wrist except between tunes. Even playing a D10 I don't rest my wrist and I've always thought the big pad looks goofy. Just my opinion though
View user's profile Send private message Send e-mail
Charlie McDonald


From:
out of the blue
Post  Posted 29 Jul 2016 4:04 am    
Reply with quote

I think Lloyd liked the loafer for his elbows, between tunes.

View user's profile Send private message Send e-mail
Bob Hoffnar


From:
Austin, Tx
Post  Posted 29 Jul 2016 5:11 am    
Reply with quote

I usually play a D10 but bring my S10 on fly dates. Or if it is ready to go out the door and I'm feeling lazy. I have found no difference between them as far as comfort goes.

The C neck on a D10 doesn't have a wrist pad and it works fine.
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website
Tony Glassman


From:
The Great Northwest
Post  Posted 29 Jul 2016 7:25 am    
Reply with quote

S-10. Do not like the pad or extra deck.

It's a moot point for me though, as I always play a D-10
View user's profile Send private message
Georg Sørtun


From:
Mandal, Agder, Norway
Post  Posted 29 Jul 2016 9:54 am    
Reply with quote

S10 or SD10 makes no difference, but I don't like pads that are so high that my wrist and forearm can touch it while I'm playing.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron