| Author |
Topic: Learning fret positions |
Jason Bergeron
From:
Lake Charles, LA, USA
|
Posted 25 Jul 2016 3:23 pm |
|
Can anyone give me some tips on learning fret positions? I'm learning how to play Cajun music, so my positions mostly go from 2-4, 5-7 and sometimes 9. When I started out about a year ago, the guy that got me started had me mark the frets, so I'd like to start getting off that crutch. I know just like everything else, this will take practice, but I was curious if anyone had any tips. I do realize they have designs along the board, but right now, that's not helping me much LOL!
Any help is greatly appreciated!
_________________
Sho~Bud Super Pro, Peavey Nashville 400
©Jason Bergeron |
|
|
 |
Pat Chong
From:
New Mexico, USA
|
Posted 25 Jul 2016 6:38 pm
|
|
It may help if you learn what chord is at what fret, instead of what number.
No pedals.....Fret 3 is "G", 5="A", 8="C", 10="D".
A+B pedals...Fret 3 is "C", 5="D", 8="F", 10="G".
A+F lever.....Fret 3 is "E", 5="F#", 8="A", 10="B", etc.
Also, using the designs will help. Notice what design is on fret 3, compare it with the design in fret 15 (one octave higher). See the similarities/difference? Fret 5 vs 17, 7 vs 19, etc. Keeping note of design helps you know/understand where you are, too.
And you are right, it will take practice..........
Enjoy your steel............Pat |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 25 Jul 2016 7:40 pm Learning fret positions
|
|
| My suggestion would be get yourself a Mel Bay steel guitar chord chart. Take a song, Pick a key, say G then find the rest of the chords you will need to make the key, G,C,D, and E Minor for a start. On a 3 pedal ABC and 2 knee lever DF steel guitar, there is about 3 different ways to get each chord in 12 frets on the neck. Once you get the chords of G worked out on the neck, Play these till you get the moves needed to memory. Then by moving all the chord down say 2 frets you would have A key,chords A,D,E and F flat minor. Good Luck and Happy Steelin. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 25 Jul 2016 7:57 pm
|
|
Patricia Warnock has a comprehensive chord chart here: http://www.cryinsteel.com/
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
John Gould
From:
Houston, TX Now in Cleveland TX
|
Posted 25 Jul 2016 8:12 pm Positions
|
|
Okay lets say the key if G
G is the 3rd fret no pedals
c Which is the 4 is on the same fret A/B pedals down
A which is the 2 is 2 frets up at fret 5 no pedals
D which is the 5 is at fret 5 A/B pedals down
So the formula is
1 and 4 same fret
2 and 5 same fret
3 and 6 same fret
keep in mind i'm talking all majors
Also 7 and 3 are together 1 fret back from the one
or in the case fret 2 .
3 minor and 6 minor on the same fret as the one, either using knee lever or pedal
I hope this helps and makes sense
_________________
A couple of guitars
Nashville 1000 Fender Mustang III Boss Katana MKII 50
Emmons LeGrande II and Sho Bud Pro II |
|
|
|
Peter Nylund
From:
Finland
|
Posted 26 Jul 2016 2:03 am
|
|
My suggestion would be not to limit yourself to the no pedal, A+B pedal and A+F kind of thinking. The fretboard contains so much more than that to spice up the playing.
_________________
I know my playing is a bit pitchy, but at least my tone sucks |
|
|
|
Jason Bergeron
From:
Lake Charles, LA, USA
|
Posted 26 Jul 2016 5:48 am Thank you! Do these tips apply for only E9th?
|
|
Thank y'all for the input! Right now, I only play a G tuning on my back neck, I know nothing on the E9th. Do these tips still apply since it's not the same tuning?
_________________
Sho~Bud Super Pro, Peavey Nashville 400
©Jason Bergeron
Last edited by Jason Bergeron on 26 Jul 2016 12:08 pm; edited 2 times in total |
|
|
|
Allan Haley
From:
British Columbia, Canada
|
Posted 26 Jul 2016 9:05 am @Peter
|
|
| Peter, could you elaborate a bit. As a beginner. I find the No pedals, AB and AF are my anchors. I;m trying to break into more melodic playing across the fretboard. |
|
|
|
Pat Chong
From:
New Mexico, USA
|
Posted 26 Jul 2016 4:47 pm
|
|
Identifying "chord and position instead of number" and noting design position would still apply.
Enjoy your (non-E9) steel...........Pat |
|
|
|
Bobby Snell
From:
Austin, Texas
|
Posted 26 Jul 2016 7:03 pm
|
|
| Jason, you might do a search here on the forum for posts about Cajun steel...I know there are members that are very knowledgeable with the G tuning. |
|
|
|
Jason Bergeron
From:
Lake Charles, LA, USA
|
Posted 27 Jul 2016 12:16 pm
|
|
| Bobby Snell wrote: |
| Jason, you might do a search here on the forum for posts about Cajun steel...I know there are members that are very knowledgeable with the G tuning. |
Thanks for the tip! I was hoping some of the ones I know would chime in. I guess I'll make another thread and see how it goes!
_________________
Sho~Bud Super Pro, Peavey Nashville 400
©Jason Bergeron |
|
|
|
Sonny Jenkins
From:
Texas Masonic Retirement Center,,,Arlington Tx
|
Posted 27 Jul 2016 12:20 pm
|
|
| Maybe contact Murnel Babineaux,,,,He plays a lot of cajun using a capo (round bar under the strings at 3rd fret). When he plays cajun,,,you KNOW it's cajun!!!! |
|
|
|
