| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Who Plays Spanish Guitar with a Slide Bar
Reply to topic
Author Topic:  Who Plays Spanish Guitar with a Slide Bar
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 2 Jun 2016 11:46 am    
Reply with quote


Just a nylon-strung classical guitar with the tuners inverted, a high nut and bridge. It has a sweet tone totally unlike a Dobro or a Weissenborn. You should try it. Any classical guitar can be converted, and the conversion back to its original state takes less time than changing strings. In fact you can change the set-up without even changing the strings. Just disconnect them at the machine head and reconnect them after the tuners have been turned round. The tuners go straight back into their original holes and even the screw holes line up.


Last edited by Alan Brookes on 6 Jun 2016 10:33 am; edited 1 time in total
View user's profile Send private message Send e-mail
Jim Mckay

 

From:
New Zealand
Post  Posted 2 Jun 2016 12:08 pm    
Reply with quote

Hi Alan.
Like to hear how it sounds. Are you playing a 6th tuning with it? I've always liked the sound of nylon strings.

Jim
_________________
Canopus d-8
Excel Jerry Byrd frypan
T-8 Stringmaster
View user's profile Send private message Send e-mail
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 2 Jun 2016 1:35 pm    
Reply with quote

I have it tuned to C6 at the moment. I must record a few clips. Actually, I've used it on several of my recordings, so I'll have to go back through my recording logs and pull one out. Winking
View user's profile Send private message Send e-mail
Preston Briggs

 

From:
Washington, USA
Post  Posted 2 Jun 2016 2:51 pm    
Reply with quote

Why turn the tuners "upside down"?

At least for experiments, it would seem like you can leave them in place.
View user's profile Send private message Send e-mail
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 2 Jun 2016 2:53 pm    
Reply with quote

Http://picosong.com/5tC5
http://picosong.com/4Mk8
Okay, here are two examples. I'm in my cowboy song mood. They're multiple track recordings done in my home studio, with me playing all the instruments. I have to warn you that I'm no Johnny Cash or Marty Robbins. Laughing Laughing Laughing Embarassed

I was just so surprised when I looked at the logs at how long ago this was. Time has been flying by lately. Crying or Very sad
View user's profile Send private message Send e-mail
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 2 Jun 2016 3:28 pm    
Reply with quote

Preston Briggs wrote:
Why turn the tuners "upside down"?
At least for experiments, it would seem like you can leave them in place.

Yes, you can. There's no absolute need to. It's not like a pedal steel where turning the instrument upside-down is inconvenient. Why bother to turn the tuners upside down? Well, why have the tuners turned upside-down on any guitar that you play on your lap? It's just convenience. I have several nylon-strung guitars, and since I intend to leave this one strung up to be played with a tone bar, I went to the trouble of moving them round. It only takes a few minutes.Winking

Here's a conundrem to mull over. Since there's nothing made of steel on the guitar, and I'm playing it with a ceramic bar, is it still a "steel guitar"? Whoa!
View user's profile Send private message Send e-mail
Preston Briggs

 

From:
Washington, USA
Post  Posted 2 Jun 2016 3:54 pm    
Reply with quote

Alan Brookes wrote:
Preston Briggs wrote:
Why turn the tuners "upside down"?
At least for experiments, it would seem like you can leave them in place.

Yes, you can. There's no absolute need to. It's not like a pedal steel where turning the instrument upside-down is inconvenient. Why bother to turn the tuners upside down? Well, why have the tuners turned upside-down on any guitar that you play on your lap? It's just convenience. I have several nylon-strung guitars, and since I intend to leave this one strung up to be played with a tone bar, I went to the trouble of moving them round. It only takes a few minutes.Winking


Thanks. I was just wondering if there was deeper reason I wasn't seeing.
View user's profile Send private message Send e-mail
Andy Henriksen

 

From:
Michigan, USA
Post  Posted 5 Jun 2016 5:11 am    
Reply with quote

Alan Brookes wrote:


Here's a conundrem to mull over. Since there's nothing made of steel on the guitar, and I'm playing it with a ceramic bar, is it still a "steel guitar"? Whoa!

Meh. People still call the center of a pencil "lead" even though it's graphite.
View user's profile Send private message Send e-mail
Miles Lang


From:
Venturaloha
Post  Posted 6 Jun 2016 11:43 am    
Reply with quote

I played ukulele with a slide bar at the show yesterday, flipped up flat like a dobro. Does that count?
View user's profile Send private message Visit poster's website
Jan Viljoen


From:
Pretoria, South Africa
Post  Posted 6 Jun 2016 11:13 pm    
Reply with quote

Blokes,

Here's the news. ordinary six string guitar can be played with a bar.

Strings 1, 2 and 3 give minors, with the root on the first string.

Strings 2, 3 and 4 give majors but three frets lower than normal. Root on the 3rd.

Only problem is that one cant play slide well with the lowered strings, or one cant fret normal with raised strings.

The games are open.


Winking
_________________
Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
View user's profile Send private message Send e-mail
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 7 Jun 2016 11:39 am    
Reply with quote

The guitar in the photograph has raised nut and bridge, Jan, and it's tuned in C6.

I wasn't advocating playing a regular guitar in standard guitar tuning, without raising the strings. You need a spare guitar which is never going to be played against the frets. It would be too much of a hassle to keep raising and lowering the strings.
View user's profile Send private message Send e-mail
Jan Viljoen


From:
Pretoria, South Africa
Post  Posted 7 Jun 2016 11:53 am    
Reply with quote

Jip Alan, I agree.

Greetings.
_________________
Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron