| Author |
Topic: 2003 PedalMaster Low Profile all wood 3/5 polished |
David Biggers
From:
Texas, USA
|
Posted 20 May 2016 5:55 pm |
|
2003 PedalMaster Low Profile all wood 3/5 everything polished package. No flags needed. Knee levers are all located on guitar back side.
Set up standard Emmons copendent with one exception, string 2 is raised 1/2 with the RNR along with the 1st and 7 being raised a whole step.
Everything else is normal.
Super easy to change to any set up.
Notice the leg locks. No puny wing nuts for me.
George L pickup installed and if you want the Wallace True Tone 18K pickup - just add another $100.00.. I just never got around to installing it.
Guitar is in excellent shape with the exception you may see some very small and shallow bar dings between the pad and the neck from before I got it.
I babied this guitar. It's a wonderful guitar. I just need to thin the herd a bit.
Has adjusted legs.
Has a wheeled tweed. The only ugly thing about the case is..one of the latches broke and I replaced it with a black one. If I had another bright one here I would go ahead and replace it. It only take 5 screws
I don't know what else you would need to know.
NON SMOKING HOUSEHOLD. KINDA...I SMOKE MY CIGARS OUTSIDE AND IN MY GARAGE....
Yes I removed the white PedalMaster decal because I felt it was not near as attractive as the guitar. It took away from the guitars stunning appearance!
Look at the pictures and if you have any question please let me know.
PM Me here on the forum.
$1850.00 plus actual shipping to the lower 48 states.
I am in the 76244 zip code.
Fort Worth Texas.
[img]
http://bb.steelguitarforum.com/userpix1504/6021_IMG_0671_1.jpg[/img]
 |
|
|
 |
Tim Russell
From:
Pennsylvania, USA
|
Posted 20 May 2016 6:02 pm
|
|
Nice guitar!
Excuse my ignorance, but who built PedalMaster steels? It appears that the crosshafts can be moved/positioned with ease on this guitar with those generous center body pre-drilled/tapped mounting points.
_________________
Sierra Crown D-10 |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 20 May 2016 6:18 pm
|
|
Roy Thomas owner.. Maurice Louisiana.
Super easy to change to any configuration..
If I can do it a monkey can do it..
Thx for asking.. |
|
|
|
Mat Davallet
From:
France (Vendée)
|
Posted 21 May 2016 1:50 am
|
|
Those Pedalmaster are just perfect !
Ball bearing on croshaft i presume ?
_________________
Mullen G2 SD10/Schild SD10/Nash400/lemay mod/Emminence neo speaker/Brad Sarno "tonic preamp"/Strymon bluesky/Telonics volume/Tonealigner pickup/ http://www.pedalsteel.fr |
|
|
|
Tim Russell
From:
Pennsylvania, USA
|
Posted 21 May 2016 3:39 am
|
|
Those leg lock wing nuts are a nice touch. Is this an all pull changer? I presume, 3 up/ 2 down? Not that I have the available cash on hand, as I just put over 2K in my daily driver, but I'm asking questions since I'm not very familiar with these.
A beautiful guitar, nice setup, and I really like the undercarriage design, the bellcranks are a nice design as well as the rest of it. Very versatile. 
_________________
Sierra Crown D-10
Last edited by Tim Russell on 21 May 2016 1:03 pm; edited 1 time in total |
|
|
|
Steven Black
From:
Gahanna, Ohio, USA
|
Posted 21 May 2016 6:09 am reply to pedalmaster
|
|
| These pedalmasters are great guitars built by Roy Thomas, Roy took pride in building guitars, I have a double 10 zebra wood veneer body plays great, would like another one, but Roy is no longer building them he says his hands are not steady anymore he now is a dealer for GFI guitars, which are very excellent guitars, if you need a GFI call Roy at Pedalmasters. |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 21 May 2016 6:58 am
|
|
Bushings on cross shaft I believe
Yes. Triple double. All pull.
Same as a GFI changer.
Call Roy and ask him about it.
He is a super nice guy.
Thx for the questions. |
|
|
|
Everett Chambers
From:
Tennessee
|
Posted 23 May 2016 5:32 am
|
|
| What does your guitar weigh? |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 23 May 2016 5:44 am
|
|
I'm not really sure.
I wouldn't think its anymore than any other SD-10. If it is it's only s pound or two.
I know the case is lighter than my Carter case by a few pounds
And it has wheels on it. |
|
|
|
Joseph Carlson
From:
Grass Valley, California, USA
|
Posted 23 May 2016 8:22 am
|
|
I still regret selling my D10 Pedalmaster a few years back. These are great guitars, easy to work on and they sound fantastic. They share a lot of parts with GFIs, so getting parts should never be an issue.
Wish I had the scratch for this one!
Good luck with your sale.
Joe |
|
|
|
Frank Markow
From:
Dallas, TX
|
Posted 23 May 2016 10:17 am
|
|
PM sent
_________________
Warning: I have a Telecaster, and I ain't afraid to use it! |
|
|
|
Stanley Benoit
From:
New Iberia,Louisiana, USA
|
Posted 25 May 2016 6:10 pm Pedalmaster
|
|
Yes they are great guitars I have two of them the one that Joe Carlson had and one made with die board and yes Roy Thomas took pride in his workmanship. This would make someone a good guitar.
_________________
Williams D10 400 keyless ,95 Pedalmaster D10 Nashville 400,Fender Vibrosonic |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 25 May 2016 6:10 pm
|
|
| Please close. Sold locally. |
|
|
|
