| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Revelation about Don Helms tuning
Reply to topic
Author Topic:  Revelation about Don Helms tuning
David DeLoach


From:
Tennessee, USA
Post  Posted 13 May 2016 5:13 am    
Reply with quote

I posted this in the Don Helms thread, but thought I'd put it here too as it may not be as visible buried in that previous thread.

I just bought the DON HELMS STEEL GUITAR SONGBOOK and was about to re-string one of the necks on my StringMaster to his tuning when I had an epiphany (you guys probably already realize this I'm sure, but it was a light bulb moment for me).

Since Don rarely used the 7th and 8th strings, I can play all Don's stuff on my C6 neck (Low to hi A C E G A C E G) by moving the tab up 4 frets and down one string.

For example, the intro to YOUR CHEATIN' HEART

Don's tuning

G# --16--16--16--15------12---13---------------
E ------------------15------12---13---7--8-------
C# --16--16--16---------------------------------
B --------------------------------------7--8-------
G# ------------------------------------7--8-------
E ------------------------------------------------
C# -----------------------------------------------
A ------------------------------------------------

C6 Tuning

G ---------------------------------------------
E --20--20--20--19--------16---17---------------
C ----------------19--------16---17---11--12-------
A --20--20--20---------------------------------
G --------------------------------------11--12-------
E --------------------------------------11--12-------
C ------------------------------------------------
A -----------------------------------------------
View user's profile Send private message Send e-mail Visit poster's website
Greg Moynihan


From:
Bremerton, Washington, USA
Post  Posted 13 May 2016 6:12 am    
Reply with quote

It does work, as you found. But, it's noticeably harder to play in that range, and my guitar's tone is not as sweet in that position, either. When I get around to that book again, I'll use the book's tuning for sure.
View user's profile Send private message Send e-mail
Chris Bauer

 

From:
Nashville, TN USA
Post  Posted 13 May 2016 6:54 am    
Reply with quote

That's exactly what I do but, for the reasons Greg points out, it's far from ideal.
View user's profile Send private message Send e-mail
Mark Addeo

 

From:
New Jersey, USA
Post  Posted 21 May 2016 4:24 pm    
Reply with quote

Great post! After learning a bunch of Hank stuff by ear in C6 I saw this post and decided to try out E6. I only had to change the higher A string to a thinner gauge (18w) but all the other C6 strings in ACEGACEG were able to tune up to A C# E G# (B) C# E G#. So going back to C6 isn't too bad if I decide to.

I have a ways to go but things do fall into a better position to play more accurately in tune. One example is Honky Tonk Blues which was way too high up on the neck in C6 tuning for me to play consistently. Anyway all good info so thanks.
View user's profile Send private message Send e-mail
Brent Marklin

 

From:
Evansville, IN, USA
Post  Posted 22 May 2016 9:25 am    
Reply with quote

Umm... whoa! I did not know this. I also own the Don Helms book and I had re-tuned my 2nd chair guitar to learn and play these songs but having the option to play these tunes without having to switch out guitars is a big plus!

Yeah I could see it being a little unwieldy trying to squeeze some of these lines in around frets 26 (heh) or so but even still, this basically re-opens up this entire book for me, with some octave substitutes and some experimentation.

Awesome tip, Thanks very much for sharing!
View user's profile Send private message Send e-mail
Morgan Scoggins

 

From:
Georgia, USA
Post  Posted 22 May 2016 9:52 am    
Reply with quote

David,
I an a big fan of Don Helms and early in my steel playing days I bought the book and learned all the HW songs in E6 tuning. I also learned a bunch of Western Swing songs from Herb Remington, It wasn't too long after, that I discovered what you have done. I could play all those HW songs on A6 by pretty much skipping the first string. Of course the songs had to be in different keys unless I transposed up the neck 7 frets. So I just played them in the keys of C, D and G which was more comfortable for the A6 tuning. I never did care for the high shrill sound coming from the thin G# string on the Helms tuning. The A6 was just fine for me.
Have fun with it. It sure has brought a lot of fun and pleasure to me
_________________
"Shoot low boys, the're ridin' Shetlands"
View user's profile Send private message Send e-mail
Steve Ahola


From:
Concord, California
Post  Posted 2 Jun 2016 4:43 pm    
Reply with quote

The first two steels I got were Morrell 8 stringers which I tuned to E13 and C6. I'd use the E13th when trying to play along to Hank Williams tunes but one day picked up the C6 by mistake and didn't notice it for about a half hour. "What the heck is going on???"

Steve Ahola
_________________
www.blueguitar.org

Recordings on electric guitar:
http://www.box.net/blue-diamonds
http://www.box.net/the-culprits
View user's profile Send private message Send e-mail Visit poster's website
Herb Steiner

 

From:
Spicewood TX 78669
Post  Posted 3 Jun 2016 7:30 am    
Reply with quote

I agree about most of the stuff applicable to C6, and in fact that's where I play the HW tunes usually. But the timbre of the heavier strings on C6 just doesn't have the tone of the E tuning.

And, of course, an Emmons does not have the same EQ as a Gibson. Wink
_________________
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
View user's profile Send private message Send e-mail Visit poster's website
Mark Hershey

 

From:
New York, USA
Post  Posted 3 Jun 2016 7:30 am    
Reply with quote

Greg Moynihan wrote:
It does work, as you found. But, it's noticeably harder to play in that range, and my guitar's tone is not as sweet in that position, either. When I get around to that book again, I'll use the book's tuning for sure.


I've had some luck moving those riffs down the neck an octave lower in the C6 tuning.
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post  Posted 3 Jun 2016 10:21 am    
Reply with quote

Yes, I do the same thing on A6 for the Helms style stuff.
View user's profile Send private message Send e-mail
Tim Weaver

 

From:
Minnesota, USA
Post  Posted 7 Jun 2016 10:03 am    
Reply with quote

I play in E6, and went the "other" way when I was working through Cindy Cashdollar's instructional DVDs.

There I basically played what she was, but 2 whole steps lower on my neck.

As others have mentioned there are differences in tone and some passages get difficult to play, but for the most part you can translate (transpose) between the two fairly easily.

The hardest part is missing the higher V string (D) on the C6 tuning that is missing in E. I can't imagine how harsh a high B would be to listen to. So when she plays on her highest string you might need to get a bit clever.

(Although, for you David, you're already in C6 so it doesn't really matter for you! Laughing )
View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron