| Author |
Topic: Profex II Card |
James Sission
From:
Sugar Land,Texas USA
|
Posted 25 Apr 2016 8:10 am |
|
| I bought a Profex II card from the forum and when I plug it in and use the global settings to load the information from the card to the profex I get a message saying "Not a profex II cartridge." I've tried loading the card first then holding the play and global button together and that wont work either. Anyone have any ideas on this issue ? |
|
|
 |
Richard Tipple
From:
Ohio, USA
|
Posted 25 Apr 2016 8:39 am
|
|
I had the same problem with mine a few times. 1st, not to be funny, but make sure the card is not in up side down 
Then try holding the ,play & global buttons while powering up then try the card again. If that fails, simply re insert the card a few times. I got mine to work by just re inserting the card 2 or 3 times. |
|
|
|
James Sission
From:
Sugar Land,Texas USA
|
Posted 25 Apr 2016 8:45 am
|
|
| Ok, I will keep trying. |
|
|
|
James Sission
From:
Sugar Land,Texas USA
|
Posted 25 Apr 2016 9:05 am
|
|
| That didn't work. I tried it multiple times. |
|
|
|
Jan Mulder
From:
The Netherlands
|
Posted 7 May 2016 1:34 am
|
|
The card has to be formatted in the Profex, else the card wont be recognized as a profex card, that means all the information will be gone after that !
Jan Mulder |
|
|
|
