| Author |
Topic: Question on Mullen PRP RKL lever. |
Kevin Maki
From:
Trimountain,MI. U.S.A.
|
Posted 21 Apr 2016 5:44 pm |
|
Is it standard setup on a Mullen PRP SD10 to be able to lower the 6th string with the RKL lever ? I recently got a used one,and the RKL only raises the 2nd string. All other pedals and knees do what they're supposed to.
_________________
S10 GFI ULTRA,Peavey Powerslide,Quilter Steelaire amp,Nashville 400 amp. |
|
|
 |
Carl Kilmer
From:
East Central, Illinois
|
Posted 21 Apr 2016 5:50 pm
|
|
On both of my Mullen's RKL raises 1 and 2 and lowers 6 to F#
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 21 Apr 2016 5:53 pm
|
|
I don't know if it's considered standard issue technically by Mullen, but all my Mullen guitars have had this pull on RKL.
It's pretty easy to install if you order a pull train from Mullen. Tell them what you are doing and they can probably give you direction if you need it. |
|
|
|
Kevin Maki
From:
Trimountain,MI. U.S.A.
|
Posted 21 Apr 2016 6:00 pm Question on Mullen PRP RKL lever.
|
|
Thanks Carl ! I was mistaken,mine raises one and two also. I don't know if a previous owner would have changed anything on it. I have all the raises and lowers on my GFI,and I'm missing not having that 6th string lower on the Mullen.
_________________
S10 GFI ULTRA,Peavey Powerslide,Quilter Steelaire amp,Nashville 400 amp. |
|
|
|
Kevin Maki
From:
Trimountain,MI. U.S.A.
|
Posted 21 Apr 2016 6:02 pm
|
|
| Jerry Overstreet wrote: |
I don't know if it's considered standard issue technically by Mullen, but all my Mullen guitars have had this pull on RKL.
It's pretty easy to install if you order a pull train from Mullen. Tell them what you are doing and they can probably give you direction if you need it. |
Thanks Jerry ! I'll probably have to do that.
_________________
S10 GFI ULTRA,Peavey Powerslide,Quilter Steelaire amp,Nashville 400 amp. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 21 Apr 2016 6:04 pm
|
|
| I hear you. I'd have a hard time losing that change as well. Good luck! |
|
|
|
Kevin Maki
From:
Trimountain,MI. U.S.A.
|
Posted 21 Apr 2016 6:21 pm
|
|
Thanks ! 
_________________
S10 GFI ULTRA,Peavey Powerslide,Quilter Steelaire amp,Nashville 400 amp. |
|
|
|
Kevin Maki
From:
Trimountain,MI. U.S.A.
|
Posted 8 May 2016 8:17 am
|
|
| Jerry Overstreet wrote: |
I don't know if it's considered standard issue technically by Mullen, but all my Mullen guitars have had this pull on RKL.
It's pretty easy to install if you order a pull train from Mullen. Tell them what you are doing and they can probably give you direction if you need it. |
Hey Jerry,I took your advice and got in touch with Mike at Mullen Guitars.He was extremely helpful in setting me up with the new pull train,and how to install it. A very simple procedure like you said. Not only is the guitar up and running with the lowers and raises,but I've gained a little more knowledge on how this machine operates ! Thanks !
_________________
S10 GFI ULTRA,Peavey Powerslide,Quilter Steelaire amp,Nashville 400 amp. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 8 May 2016 9:18 am
|
|
 Glad you got it done. Mullen design is really clean and well laid out. Pretty easy to work on and the folks at Mullen are tops too boot. Enjoy  |
|
|
|
