| Author |
Topic: Knee Levers Rus-Ler Looking For Options |
Daymon LaPoint
From:
Jasper, Texas
|
Posted 10 Mar 2016 10:50 am |
|
Thanks in advance for y'alls wisdom.
I have a Rus-Ler D-10 with parts for 9&8 that I was selling but the kid that thought he wanted it didn't show up. So I've decided to keep it and bring some new life back into it. Anyway, back to the question.
The factory knee levers are thin aluminum and to me flimsy. I like the Sho-Bud Tear Drop type knee lever or something with more substance. Do you know if there are after market standard type knee levers that I can install on this Rus-Ler. I've attached a picture so you can see what I'm working with.
Any advice is much appreciated.
_________________
Steel Learnin'
'66 Emmons Bolt-On, Sho-Bud LDG, Sho-Bud Fingertip, Rus-Ler D-10, '70 Emmons, P2P Bad Dawg, Fender '59 Bassman, Fender Twin Reverb and Rick Johnson Cabinets. Evans 300 Hybrid, Evans SE-100, Evans FET500, Previous and Proud previous owner of James Blonde, Brownie, and Rosalee. |
|
|
 |
Daymon LaPoint
From:
Jasper, Texas
|
Posted 10 Mar 2016 11:09 am
|
|
I just spoke with Chuck Back. He helped me with new original pedals and bell cranks.
_________________
Steel Learnin'
'66 Emmons Bolt-On, Sho-Bud LDG, Sho-Bud Fingertip, Rus-Ler D-10, '70 Emmons, P2P Bad Dawg, Fender '59 Bassman, Fender Twin Reverb and Rick Johnson Cabinets. Evans 300 Hybrid, Evans SE-100, Evans FET500, Previous and Proud previous owner of James Blonde, Brownie, and Rosalee. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 10 Mar 2016 11:55 am
|
|
That looks a lot like MSA and Dekley.
If they're 3/8" shafts, I'd consider using those. They dang sure ain't flimsy
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Daymon LaPoint
From:
Jasper, Texas
|
Posted 10 Mar 2016 11:57 am
|
|
Much appreciated Lane! That's a good thought.
_________________
Steel Learnin'
'66 Emmons Bolt-On, Sho-Bud LDG, Sho-Bud Fingertip, Rus-Ler D-10, '70 Emmons, P2P Bad Dawg, Fender '59 Bassman, Fender Twin Reverb and Rick Johnson Cabinets. Evans 300 Hybrid, Evans SE-100, Evans FET500, Previous and Proud previous owner of James Blonde, Brownie, and Rosalee. |
|
|
|
chris ivey
From:
california (deceased)
|
Posted 10 Mar 2016 1:26 pm
|
|
| i thought dekley levers were thin and bendable. |
|
|
|
Georg Sørtun
From:
Mandal, Agder, Norway
|
Posted 10 Mar 2016 1:28 pm
|
|
| chris ivey wrote: |
| i thought dekley levers were thin and bendable. |
Yes, they are  |
|
|
|
Daymon LaPoint
From:
Jasper, Texas
|
Posted 10 Mar 2016 2:02 pm
|
|
Thanks for the wisdom guys. Obviously he was referring to MSA being heavy and Dekley being an option that will fit the Rus-Ler. It was a two part question I posed. I do however appreciate the positive input. 
_________________
Steel Learnin'
'66 Emmons Bolt-On, Sho-Bud LDG, Sho-Bud Fingertip, Rus-Ler D-10, '70 Emmons, P2P Bad Dawg, Fender '59 Bassman, Fender Twin Reverb and Rick Johnson Cabinets. Evans 300 Hybrid, Evans SE-100, Evans FET500, Previous and Proud previous owner of James Blonde, Brownie, and Rosalee. |
|
|
|
Carl Heatley
From:
Morehead City,NC
|
Posted 14 Mar 2016 3:42 pm
|
|
You can get some 1/2 x 1/2 Aluminum square bar from ebay...I just bought 8 pieces 8" long for $12 with free shipping...Just copy a Mullen lever...Also...You may want to change out the heavy cross shafts with aluminum bar...You can get that at Lowe's!...And maybe change out the pull rods to aluminum too...When it's all done you maybe be able to carry it to the car without taking a break!!!..  |
|
|
|
Daymon LaPoint
From:
Jasper, Texas
|
Posted 14 Mar 2016 4:29 pm
|
|
Carl, wonderful ideas. I appreciate your time and I'll take a look into the aluminum square bar. Thank you kindly! ðŸ‘
_________________
Steel Learnin'
'66 Emmons Bolt-On, Sho-Bud LDG, Sho-Bud Fingertip, Rus-Ler D-10, '70 Emmons, P2P Bad Dawg, Fender '59 Bassman, Fender Twin Reverb and Rick Johnson Cabinets. Evans 300 Hybrid, Evans SE-100, Evans FET500, Previous and Proud previous owner of James Blonde, Brownie, and Rosalee. |
|
|
|
Paul Sutherland
From:
Placerville, California
|
Posted 14 Mar 2016 5:16 pm
|
|
The Rusler is built with 3/4 inch maple, so the body of the guitar is heavier than most steel bodies. And I'm pretty sure the cross shaft are aluminum, as is most, if not all of the hardware underneath. So I don't think you'll ever get this steel much lighter. The heft is why it sounds like it does, and is as stable as it is.
Also: When I picked this steel up from the factory Russ showed me a changer piece and a tuning head piece for his steels versus the same pieces from a ZB. The Rusler pieces were substantially heavier, thus the sustain and weight.
_________________
It don't mean a thing if it ain't got that swing. |
|
|
|
Daymon LaPoint
From:
Jasper, Texas
|
Posted 14 Mar 2016 6:43 pm
|
|
Thanks Paul, good to hear from you. My intentions are not to lighten it, the entire undercarriage is in fact all aluminum. I want heavier more substantial knee levers. I don't like the current thin gauge aluminum used nor do I like the shape or appearance of them. Gonna try and get someone to sell me some Sho-Bud teardrop type that I can modify or just make them myself out of aluminum bar stock. There is no getting around how heavy this thing is, nor how well it plays and sounds. Great guitar, thank you.
_________________
Steel Learnin'
'66 Emmons Bolt-On, Sho-Bud LDG, Sho-Bud Fingertip, Rus-Ler D-10, '70 Emmons, P2P Bad Dawg, Fender '59 Bassman, Fender Twin Reverb and Rick Johnson Cabinets. Evans 300 Hybrid, Evans SE-100, Evans FET500, Previous and Proud previous owner of James Blonde, Brownie, and Rosalee. |
|
|
|
