Question about BL 710 wiring

Marco Schouten · From: Amsterdam, The Netherlands

In my steel guitar there's a Bill Lawrence 710 pickup with 2 wires, black and white. From what I understand the white one is hot and the black wire is ground. On my guitar the black wire is soldered to the tip of the jack, so theoretically the wrong way around?

Would this affect the tone or doesn't it matter, since there is only one pickup, no tone controls or switches?

Thanks!
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo

Stephen Cowell · From: Round Rock, Texas, USA

It should make no difference... do an experiment!
_________________
New FB Page: Lap Steel Licks And Stuff: https://www.facebook.com/groups/195394851800329

Marco Schouten · From: Amsterdam, The Netherlands

I could do the experiment, but if not necessary, I'd rather leave it like it is.
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: