Pull rod size for a SHO-BUD

Jimmy Gibson · From: Cornwall, England

Could someone please give me the size of the pull rods for a S/BUD PRO 1 the later type pull rods system. They are for this steel I am setting it up as a Universal..

Thanks. Jimmy.

Lane Gray · From: Topeka, KS

Pretty sure they stuck with 1/8
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects

Jimmy Gibson · From: Cornwall, England

No Lane 1/8 is too big, have just found out it is probably 3/32.

Jimmy G

Michael Yahl · From: Troy, Texas!

If it is a later model 2 hole pull with locking swivels or a hex shaft model then they used Ã˜.109"(7/64") with the rolled #5-40 thread.

I have them here. http://psgparts.com/Pull-Rod-Set-Cut-to-Fit-109-w-5-40-Thread-RODSET-C2F-THRD-109-540.htm

If it has 2 hole pulls with barrels it uses the Ã˜.125"(1//8") rods. http://psgparts.com/Pull-Rod-Set-Cut-to-Fit-125-w-5-40-Thread-RODSET-C2F-THRD-125-540.htm

Michael
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp

PSG PARTS
http://www.psgparts.com/

Jimmy Gibson · From: Cornwall, England

Hi Michael, my S/BUD has a 3up 2 lower changer with the 5 hole bell cranks with hex shafts the same as the Super Pro and straight knee levers.

Thanks Jimmy..

Michael Yahl · From: Troy, Texas!

These are the ones Jimmy.
http://psgparts.com/Pull-Rod-Set-Cut-to-Fit-109-w-5-40-Thread-RODSET-C2F-THRD-109-540.htm
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp

PSG PARTS
http://www.psgparts.com/

Ken Byng · From: Southampton, England

Jimmy - if you get stuck and can't get any threaded rod in the UK, you could order it from Michael and I could collect it for you at the Dallas show and send it on to you once I get home. Very Happy

_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,

Jimmy Gibson · From: Cornwall, England

Thanks Ken, Bob Adams has what I need but thanks for being there to help I am very grateful.

Jimmy.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: