Nylon tuning nuts

Antolina · From: Dunkirk NY

Hey Guys. Any idea where I can find the 3/16th nylon tuning nuts for a Sho-Bud? I can't seem to find them anwhere.

rc
_________________
The only thing better than doing what you love is having someone that loves you enough to let you do it.

Sho~Bud 6139 3+3
Marrs 3+4

RC Antolina

Jon Light (deceased) · From: Saugerties, NY

http://www.psgparts.com/Pull-Rod-Nut-5-NT-187-125N.htm

Antolina · From: Dunkirk NY

Thanks Jon.

Are these for the Sho-Bud rods? I have no idea what the size is. I have always thought they were a standard 1/8 rod.

rc
_________________
The only thing better than doing what you love is having someone that loves you enough to let you do it.

Sho~Bud 6139 3+3
Marrs 3+4

RC Antolina

Jon Light (deceased) · From: Saugerties, NY

You'll need to figure out which rods you have in order to choose between #4 & #5 nut.

http://www.psgparts.com/Pull-Rods_c7.htm

Charlie McDonald · From: out of the blue

I suggest Frenchie's Steel Mill for 3/16" nuts:
http://www.frenchyspedalsteel.com/the-steel-mill-products-and-publishing.html

Michael Yahl · From: Troy, Texas!

All Sho~Buds use a #5 tuning nut unless someone has modified it with smaller rods. The only thing that you need to know is the length of the nut as Sho~Bud used about 5 different lengths over the years.

Michael
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp

PSG PARTS
http://www.psgparts.com/

Antolina · From: Dunkirk NY

Thank you Mike.
_________________
The only thing better than doing what you love is having someone that loves you enough to let you do it.

Sho~Bud 6139 3+3
Marrs 3+4

RC Antolina

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: