| Author |
Topic: JBL D-110 Mounting Gaskets? |
Patrick Ickes
From:
Upper Lake, CA USA
|
Posted 21 Nov 2015 11:26 am |
|
I have a pair of old JBL D110's I'm installing in a Tremolux style cabinet.
With the heavy frame on these speakers, do I need to use some kind of foam gasket or should I just bolt them in?
Patrick |
|
|
 |
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 22 Nov 2015 7:46 am
|
|
| No foam gaskets required, just bolt them in. But, make sure you don't over-tighten the bolts, or you'll warp the frame. |
|
|
|
Patrick Ickes
From:
Upper Lake, CA USA
|
Posted 24 Nov 2015 11:56 pm
|
|
Thanks Donny,
Turns out they're D110F speakers,mounting is complete, just need to connect to the Vibroverb and see what happens.
Any idea of the wattage rating of these speakers?
Patrick |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 25 Nov 2015 5:27 pm
|
|
| About 75 watts each, so two of them should handle about 150 watts. |
|
|
|
Patrick Ickes
From:
Upper Lake, CA USA
|
Posted 25 Nov 2015 9:20 pm Sonic Bliss?
|
|
Thanks again.
I was a little worried they would be rated at 25 watts or so.
I'll be splitting 40-50 watts balanced with the Vibroverb's open back 8ohm D-130F, and the 2x16ohm/8ohm parallel D-110F closed back cabinet.
I'm hoping for a nice airy sound with a tight bass punch from the 2x10 cab.
I'm pushing the amp with a 67ish ZB Custom D10 that sounds real nice through the amp as is.
Patrick |
|
|
|
