| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic RK with Levers!
Reply to topic
Author Topic:  RK with Levers!
Tony Boadle

 

From:
Skibbereen, County Cork, Ireland
Post  Posted 16 Nov 2015 1:53 pm    
Reply with quote

I mentioned a while back that I was considering a Winter project...modifying my 'Recording King Multibender Special' by adding knee levers.
Well, it's done, and it works!
The Deusenberg Multibender was giving me the basic PSG sound I wanted to enhance my picking, but I found that having to keep my hand over the levers was awkward and restricting sometimes.
So here's how I did it.
Step one: Buy a four-leg lap steel stand and fit a wooden panel beneath it.
Step two: Fix two brackets (I used flat metal picture hooks) to the 'Bender levers with Gorilla Glue.
Step three: Drill down through the body and run two guitar strings through plastic tubing (to ease friction).
Step four: Make up various rollers to guide the strings to the levers.
Step five: Go to the hardware store and buy two desk-flap stays (these are the stays that hold the flap secure when you open your writing bureau or similar)and adapt them to work as knee levers.
Step six: Arrange the levers to best suit your seating position, (note the trial and error screw holes btw) add a little tension spring or two if you need to, re-position the lever positions a few times until everything works right, add a couple of stops to prevent over-pulling on the 'Bender levers.
Step seven: Sit back and enjoy! Both knees push right to left, it's the easiest way and less complex.





View user's profile Send private message Send e-mail
Mike Neer


From:
NJ
Post  Posted 16 Nov 2015 2:44 pm    
Reply with quote

Amazing work, Tony! Wish I had those skills.
_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Tony Boadle

 

From:
Skibbereen, County Cork, Ireland
Post  Posted 17 Nov 2015 2:22 am    
Reply with quote

Thanks, Mike. Pretty basic stuff if you look closely, just off-the-shelf brackets, nuts and bolts, washers and a few odd bits.
Each to their own...I wish I could pick lap steel like you!
View user's profile Send private message Send e-mail
Stefan Robertson


From:
Hertfordshire, UK
Post  Posted 17 Nov 2015 5:03 am    
Reply with quote

The amount of work you must've put in.

Absolutely respect the work. Its like an early Pedal steel incarnation.

Since you are switching over, maybe get a Carter Starter pedal steel.

Probably cheaper than all that work. Laughing
_________________
Stefan
Bill Hatcher custom 12 string Lap Steel Guitar
E13#9/F secrets: https://thelapsteelguitarist.wordpress.com

"Give it up for The Lap Steel Guitarist"
View user's profile Send private message Send e-mail Visit poster's website
Tom Pettingill


From:
California, USA (deceased)
Post  Posted 17 Nov 2015 6:33 am    
Reply with quote

Cool mod Tony Smile
_________________
Some misc pics of my hand crafted steels
Follow me on Facebook here
View user's profile Send private message Send e-mail
Frank James Pracher


From:
Michigan, USA
Post  Posted 17 Nov 2015 7:11 am    
Reply with quote

Love it! Good old fashion ingenuity.
_________________
"Don't be mad honey, but I bought another one"
View user's profile Send private message Send e-mail
Peter den Hartogh


From:
Cape Town, South Africa
Post  Posted 17 Nov 2015 9:04 am    
Reply with quote

Great Job! Very inspiring!
The fret markers on the fretboard are useful to communicate in which position the levers are.
Under which fret is the left lever and under which fret is the right lever?
View user's profile Send private message Send e-mail Visit poster's website
Joe Breeden

 

From:
Virginia, USA
Post  Posted 17 Nov 2015 9:37 am     Great Job
Reply with quote

Tony you are the man. Great job. Maybe a sound clip soon.
View user's profile Send private message Send e-mail
Tony Boadle

 

From:
Skibbereen, County Cork, Ireland
Post  Posted 17 Nov 2015 1:41 pm    
Reply with quote

Thanks for all the comments!
In answer to the couple of questions: 1)The left lever sits under the 6th fret marker, the right lever under the 14th.
2)I have owned a Carter Starter, and a ShoBud Maverick, I found them interesting but more than I needed.
I love the 6-string lap set-up, and just wanted easy raises on the second and third to add to the sound. The Recording King is light and easy to play, plus I love looking at it, which always helps.
And as for the man hours...well I wouldn't have done it if it didn't take a while! Those of you who have retired, particularly from any craft work (I was a cabinet-maker) will know that itching 'I need a project' feeling.
Having proven that the cable pull system works on the Multibender levers, I'm now going to try building a pedal set-up instead of the levers, once again using off-the-shelf domestic hardware and bits from my box!
I'll post the results when it's done, thanks again for the kind words!
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron